What does error launching installer mean? Dead by Daylight launch error, Launch Error and errors in the game

Windows installer error is one of the most common pop-up problems that users encounter. operating system Windows.

The error may appear regardless of your OS version.

Reasons for the error

You can scan the OS using the Sfc /scannow command. You need to enter it into the command line window.

You can also launch the command line in two other ways:

Start -> All Programs -> Accessories -> Command Prompt.
Start -> Run and enter the program name cmd.exe

In a few minutes you will be provided with detailed information about OS disks, corrupted files, problems with services and other system programs.

The command line will not only find corrupted and corrupted files, but also replace them with functional ones.

After scanning, close the command prompt and restart your personal computer or laptop. Try running the installation process of any executable file.

Microsoft also offers users an automatic utility that can solve the problem with the installer.

Go to the web address of the company's official website https://support.microsoft.com/ru-ru/mats/program_install_and_uninstall

In the window that opens, click on the “Run Now” button. The utility will restore the correct configuration of the installer.

It is worth noting that the utility does not work with the eighth version of the operating system.

Configuring installer access to msi files

The installation problem may be caused by the installer not having access to msi files. The user can resolve this problem independently.

Follow the instructions below:

Find your installation file and click on it right click mice;
Select the properties window;
Go to the security settings tab;
In the groups or users text box, check to see if there is a user named "system". If it is not there, you need to add the user manually;

To add a new user, click on the Edit button and then on the Add button;
In the text field for the names of the selected object, write the word “system” (without quotes). If you are using the English version of the operating system, enter the word System;
The entered word should instantly become underlined, as shown in the figure below;

Check the box next to Full access and now click on the OK button;

The installer will now be able to access executable file. The installation should complete without problems.

Please note that in some cases antivirus software may block access to the installation file.

To solve this problem, you need to log into the operating system under account administrator, turn off the antivirus and enable compatibility with other OS versions in the antivirus properties settings, as shown in the figure below.

Windows Error Installer - Problem solving methods

An NSIS (Nullsoft Scriptable Install System) error is an error that appears when you’re trying to install something, but the setup file is in some way corrupt or incomplete or if it doesn’t match the settings on your system. The message NSIS error - Error launching installer means that the installer has failed the self-check because it has been modified from its original form. If the installation continues, the software will be broken and won’t function properly.

To prevent this, the installer prevents itself from continuing.

There are a few situations where you might encounter such an error:

The files for the software you have downloaded from the internet aren’t complete
The physical media (CD/DVD) you’re installing from is damaged
The downloaded files have been modified and are different from the original
Required hardware, such as the CD or DVD drive, is not working
You have a virus on your computer

There are a few simple things that you can try to solve this issue. All of them are simple, and you can try installing the software again after you’ve tried each of the solutions.

Method 1: Repair Corrupt Edge Files

Download and run Reimage Plus to scan and restore corrupt and missing files from , and then see if the issue is fixed if not then try the other methods listed below.

Method 2: Rename the installer

This is extremely simple, and unlikely to trigger the NSIS error, but you can try it as it has been known to help. Locate the setup file, and Right-click it, and select Rename from the list.

Click it, and press F2 on your keyboard.

Change the name to something simple which only has one word. For example, change it to Softwarenamesetup.exe. Try running the setup again and see if it works.

Method 3: Download the setup from another source

The installer file you have downloaded may be corrupted, which will give you the NSIS error. If this is the case, try looking for the setup elsewhere, as maybe some other place has a fully working, non-corrupted installer. Try doing this with a few installers if the second one doesn’t work.

Method 4: Install the software using the Command Prompt

The Command Prompt is a powerful tool, and you can use that to your advantage here. Click Start and type cmd and choose Run as administrator.

When it opens, drag the installer inside the window. You will see that the path to the installer will show up on the Command Prompt screen. Don't press Enter yet. Press spacebar, and type /NCRC after the setup path.

If for some reason, the path to the executable file doesn’t show up when you drag it into the Command Prompt (Window) then manually type and browse to the location.

Then press Enter and the setup should start. The /NCRC command will make the installer skip the corruption test, and it will continue running even if there is an error with it. Keep in mind though, that this will install your software, but if there is a serious error, it might not work.

Method 5: Check System Language

Hold the Windows Key and Press X and choose Control Panel.

In Control Panel type Language

From the Language pane, choose Change date, time or number formats from the left pane and then go to the Administrative tab.

Choose Change System Locale to your country's language. If the software is in a different language, then you can change the Language but that will also change Language and Keyboard layout.

Method 6: Move Installer to Another Drive

In some cases, the installer can’t be installed from a setup if it is in a specific disk. Therefore, if you have multiple partitions on your computer you can move the setup to another partition. For that:

Right-click on the “ (installer name)setup.exe" and select " Copy“.
Open the partition and select Paste“.
Double click on the executable and check to see if the issue persists.

Method 7: Scan your computer for viruses

If all of the aforementioned methods fail, your computer may be infected with a virus that prevents it from installing software, and until you clean it, you won’t be able to do much. You can do this with an antivirus of your choice, but be sure to run a full, thorough scan, and not a quick one, as the quick one skips a lot of files and folders which may potentially contain the problematic file which is infected with a virus.

The may be the result of a seriously corrupt setup file, or a false error message due to a bug in the operating system, but whichever it is, one of the methods above will help you deal with the issue.

A fairly common problem among users of the Windows operating system of any version is the msi error when installing programs from a file with the .msi extension. In this article, I will describe common problems with the Windows 7/10/XP installer and solutions to them, and also make a video on the current issue.

Files with the .msi extension are regular installation packages (distributions) from which the program is installed. Unlike the usual "setup.exe", to run the file msi system uses the Windows Installer service (msiexec.exe process). Speaking in simple words, Windows Installer will unzip and run the files from the distribution. When Windows Installer does not work, various errors appear.

In general, this really infuriates me, because... After a stupid error message, it’s completely unclear what to do next. Microsoft specifically developed the Windows Installer to expand the capabilities of installing programs (mainly for system administrators), but did not take proper care to ensure that the service would run smoothly or even adequately report problems. Now we have to sort it out :)

Problems may be with the operation of the service itself or may arise during the installation of programs, when everything is configured, in principle, correctly. In the first case, you need to tinker with the installer service, and in the second, solve a problem with a specific file. Let's consider both options, but first the second one.

msi file errors

Very often errors appear due to insufficient system rights to files or folders. This is not to say that Windows Installer does not work; in this case, you just need to add the necessary rights and everything will work. Just yesterday I was faced with the fact that the downloaded distribution kit.msi did not want to be installed, the installation wizard starts successfully, the parameters are selected, but then the system thinks for a few seconds and gives an error:

"Error reading from file 'filename' verify that the file exists and that you can access it" (Error 1305). Translated: “Error reading from file...check if the file exists and if you have access to it.” Well, aren't you stupid? Naturally, the “Retry” button does not help, and canceling stops the entire installation. The message also does not carry any special meaning, because the file definitely exists and I have access to it, otherwise I simply wouldn’t be able to run it and receive this message, and for some reason it’s in English :)

And the mistake is that it is not I who should have access to the file, but the Windows installer, or rather the System itself. The solution is very simple:

Now the installer error will not appear! You can add access to the entire folder from which you usually install programs, for example, to the “Downloads” folder, like mine. Watch a video on solving problems with access rights:

In Windows XP, the Security tab will not appear if simple file sharing is enabled. To turn it off, you need to go to “Start -> Control Panel -> Folder Options -> View” and turn off the “Use simple file sharing” option. In stripped-down versions of Windows 7/10 and XP, there is no “Security” tab at all. To see it, you need to log in as an administrator.

Registry and service settings

The next way to resolve the error is to restore operating parameters in the Windows Installer registry.

To do this, download the archive and run two reg files from there, corresponding to your version of Windows. Agree to import settings.

Important! Before last action desirable! If the method does not help or gets worse, you can recover to your previous state.

In Windows XP or Windows Server 2000 install the latest installer version 4.5.

If this does not help, then re-register the components:

Press "Win + R" and enter " cmd". Then in the black window enter the following commands in sequence:
MSIExec /unregister
MSIExec /regserver
The answer should be empty, no errors. If the problem is not solved, enter another command
regsvr32 msi.dll
Close the black window

If it says that you do not have enough rights, then you need to run .

If the commands were executed, but did not help, then run msi_error.bat from the archive and check the result.

The last option is to download the Kerish Doctor program, it has a function for fixing the installer service and many other common Windows problems.

Also, many programs use the .NET Framework, so it would be a good idea to install the latest version of this package. And, finally, one more piece of advice: if in the path to the distribution file there is at least one folder with a space at the beginning of the name, then remove the space. This simple trick will solve your problem :)

Summarizing

Errors with the Windows installer are very unpleasant, there are a lot of them and it’s not immediately clear where to look. One thing is clear - the system has failed and needs to be restored to working condition. Sometimes nothing helps and you have to. However, do not rush to do this, try asking for help on this forum. Describe your problem exactly, tell us what you have already done, what messages you have received, and perhaps they will help you! After all, the world is not without good people :)

When installing applications that use the Nullsoft Scriptable Install System installation package, you may receive an error - NSIS Error with the text “Error Launching Installer” or “Installer integrity check has failed”.
Also, the window may contain a link to the page nsis.sf.net/nsis_error. How to fix it?
If you downloaded the program from the Internet, then most likely the reason is that the program installer simply did not download properly. Start by downloading it again and running the installation. Usually this is what helps.

If it still pops up NSIS Error, then try downloading the program from another site again. Perhaps there is a broken copy uploaded there.
You can also try using another browser or Download manager to download.

What else can you try?!

- copy the installer to another folder. Make sure that it does not contain Russian letters - only Latin ones!

— Check that the name of the program installer does not contain Russian letters, spaces or special characters. This can also cause NSIS error.

— Disable installed antivirus, perhaps it is blocking the installer. It is not at all necessary that the program contains a virus. It’s just that antivirus programs can block the actions of an application only on suspicion. This is fine.

— Update the databases antivirus program and check it on your computer. The NSIS Error may appear due to the fact that some virus has damaged the installation package by writing part of its code there. After checking, download the installation package again and run it.

— Check logical drive the computer on which the installer is located, system utility chkdsk.

If suddenly nothing helps and NSIS Error it still won’t let you install the application - then try downloading it from friends or acquaintances and check the installation on their computer. Does it work without problems? Copy it to a flash drive and bring it to you. By doing this, at least you will eliminate problems with the installation file itself by checking its functionality.

We continue to analyze errors in the process and when launching games; today our gaze fell on an interesting horror movie and a gamer’s nightmare: the Dead by Daylight launch error. Fans of the horror genre and Survival horror style greeted the game very well. You will have to do everything to survive, the atmosphere is constantly tense, and with each step the players are immersed deeper into an atmosphere of anxiety and fear, the passage is made difficult by the constant lack of first aid kits and cartridges. You can play as “survivors” from a third person perspective and a “killer maniac” from a first person perspective. Accordingly, you will have to survive using various tricks or ruthlessly destroy your victims.
You cannot do without pitfalls and despite the fact that the game was released on STEAM a year ago, it is still full of errors and bugs. It’s especially offensive when the “Launch Error” error immediately pops up.

The first thing you need to do is open the Steam client - go to the library, find the game and right-click. From the drop-down list, select "Delete Content".

To delete the remaining files, follow the following path:

My Computer - Users - “Username”;
Find the folder AppData(It is hidden, before doing this, check the “Show” checkbox in the folder properties hidden files and folders";
Next is the Local folder;
We find the DeadByDeadlight folder and boldly demolish it;
After this, do not forget to reinstall the game again and check its functionality;

Dead by Daylight Launch error failed to start the game - solution

Another way to deal with the launch error lies in the Microsoft Visual component; it must be removed and reinstalled. To do this we go:

The DirectX version may be to blame for other problems in the game; below we will tell you what to do with other types of errors.

Error DX11 feature level 11.0 is required to run the engine

The third way to solve the problem is to install or update DirectX components. The message says: “Version 11 is recommended to run the application.” Sometimes just updating packages helps. There is no need to download the package - it is already in the game folder, the path is as follows:

Conclusion

We tried to describe common problems when appears Dead by Daylight launch error, Launch Error and other startup conflicts, and also offered workable solutions found on the Internet. If you notice other glitches or know how to solve them, write in the comments or in our contact group, we will help.