Good afternoon I installed 2 pieces for myself. split Dantex Vega RK-09SEG. There is a TEMP button on the remote control, when pressed it should first show the indoor temperature, and then the external temperature. So, neither of the 2 splits shows the external temperature - only the internal one. Is the problem with the installers? Or is such a function not included?
Answer
Hello!
By pressing the TEMP button on the infrared remote control of the DANTEX VEGA model, you get the temperature value you set for the air conditioner in this moment time, after 5 sec. After pressing the remote control, the real temperature inside the room will be displayed. The thermometer inside the house is the set temperature, the thermometer outside the house is the temperature in the room. The wireless remote control cannot show the temperature outside (external), since it is only an IR signal transmitter, and in order to receive data from external unit he must also be a receiver. And such remote controls for household air conditioners does not exist. For this purpose, wired remote controls are used, usually on industrial systems.
DANTEX Timer TIMER
Good afternoon. I have a Dantex RK-09SEG air conditioner, please tell me how to use the timer, because... this is not reflected in the instructions. And what is the TEMP button on the remote control for?
Answer
Hello!
On the remote control of the Dantex RK-09SEG air conditioner, the timer is activated as follows: Pressing the TIMER ON key - allows you to set the time after which the air conditioner will turn on (one press is 1 hour). For example, when leaving for work you turn off the air conditioner. If you return after 10 hours (1 hour there, 8 hours of work and an hour back), then set the timer (TIMER ON) to 9 hours. An hour before your arrival, the air conditioner will turn on and cool the room within an hour, just in time for your arrival. If you set TIMER OFF to 15 hours, the air conditioner will turn off after 15 hours. Then it will turn on again after the set TIMER ON 9 hours and the 24th cycle will repeat. When the timer is activated, the timer icons and its settings are displayed on the remote control, and the TIMER indicator on the indoor unit of the air conditioner lights up.
By pressing the TEMP key of the VEGA model infrared remote control, you get the temperature value you set for the air conditioner at a given time, after 5 seconds. After pressing the remote control, the real temperature inside the room will be displayed. The thermometer inside the house is the set temperature, the thermometer outside the house is the temperature in the room.
DANTEX AUTO mode
Hello! I am interested in why the temperature is not set in the AUTO mode in the E2 CLASSIC R410 Series air conditioner, but is automatically set to 25 degrees. What is the point of this mode?
Answer
Hello!
Meaning automatic mode automatically maintaining the temperature you set. To do this, perform the following steps on the DANTEX wireless remote control: 1. Press the MODE key, select AUTO mode. 2. Press the TEMP temperature key (UP arrow or DOWN arrow). Set the desired temperature. 3. Press the ON/OFF key. The air conditioner will turn on and maintain the temperature you set. The fan speed will be selected automatically. Please note that the remote control has two small holes L - LOCK, R - RESET. The first locks the settings of your remote control, the second returns the factory settings. Before contacting service, make sure that your remote control is not blocked. If not blocked, return to factory settings via RESET, and then turn on the air conditioner in accordance with the operating instructions for the air conditioner control panel.
Dry function for air conditioning: translation into Russian and 3 temperature modes
Many modern air conditioners are equipped with a Dry function. Modern air conditioners are devices that can cool the air in a room, as well as many other functions. That is why this equipment is called multifunctional and, most importantly, quite in demand. You can hardly find offices shopping centers, clinics or any other premises that do not have such household appliances. Among the most popular functions are: Dry, Heat, Fan. Each air conditioner operating mode has a specific purpose and is turned on at a specific time, either manually or through an automated system.
Heat: translation into Russian in the air conditioner
The translation into Russian of this mode of operation is very simple and it is a banal heating of the air in the room. As a rule, it activates independently when the operating temperature in the room begins to decrease from the set level. It is worth noting that not every air conditioner contains instructions regarding minimum value temperature at which the air conditioner can be operated.
In order to heat the air in the room, you need to turn on the Heat function in the air conditioner
For example, there are models that can only operate at temperatures not lower than:
- -5 oC;
- -10 оС;
- -15 oC.
If the device model has limitations and it is impossible to turn it on at a temperature lower than specified in the instructions, then there is a high probability of product failure. That is why, when purchasing equipment, you need to pay attention not only to the equipment itself, but also to the conditions under which the operation will be carried out. There are products that can operate at the lowest temperatures.
Air conditioner modes: icons and captions on the control panel
There are certain icons on the control panel that indicate the air conditioner modes.
You can easily get acquainted with the air conditioner modes using the instructions
Each of them is necessarily signed and has a certain meaning.:
- ON/OFF – on. and off devices;
- TEMP SET – select temperature level;
- FAN SPEED – speed at which the fan rotates;
- TAIMER – delay of turning on or off the device;
- SLEEP – sleep mode setting;
- SWING – button responsible for controlling horizontal blinds;
- RESET – reset of specified parameters;
- MODE – button responsible for setting the device operating mode;
- SWING – control of vertical blinds;
- TURBO – acceleration of the device.
As you can see, there is nothing complicated. It is enough to decide on necessary action and press the corresponding button.
Fan: translation into Russian in the air conditioner
Air conditioner operating modes are the functions that the device will perform when you press a button with the corresponding icon.
It could be:
- Drying;
- Hydration;
- Ventilation.
A rather convenient function that the air conditioner has is the Fan function.
IN in this case We are talking specifically about ventilation, which means turning off the cooling equipment and turning on the fans. The peculiarity of the function is that air is taken from the street. And it gets inside, but without additional cooling or heating.
This function is an advantageous option for those buildings in which central heating is installed.
There are models in which you can turn off the air intake from outside and simply connect the ventilation of the space in the room. On more modern air conditioners it is possible to regulate the fan speed.
Basic air conditioner modes and their designations
In general, an air conditioner is used for: dehumidification, cooling and heating. It is worth familiarizing yourself with each mode in advance in order to have an idea of the capabilities of this equipment. Heating or cooling functions are extremely important when purchasing an air conditioner, as these are the main modes. Cooling is carried out through a physical process, or to be more precise, the state of the refrigerant changes from liquid to gas, due to which warm air is drawn from the room.
In heating mode, the opposite happens: warm air is supplied to the room. This function is required from autumn to late spring and is most often used in public areas.
As for operation during winter, you need to carefully study the equipment instructions and determine the maximum permissible level negative temperature at which the device can be used. There are models of air conditioners that are used to heat air from the room in which they are installed, and the work is carried out through the operation of a heating element that heats the air passing through its cavity.
When choosing an air conditioner, you should additionally take into account both its main modes and designations
Many people are interested in the meaning of the word – air dehumidification. In general, not everyone uses a dehumidifier, but it is required to remove humidity and dampness from a room. When cooling, turning on the dehumidifier means providing more comfortable air to the room. The dehumidifier can turn on automatically, but this is only in those models that are equipped with a moisture level capture sensor. As soon as a deviation from the norm occurs, the Dry function is activated, allowing the space to be drained in a minimum amount of time.
If you purchase an air conditioner that has an automatic mode selection button, you can relieve yourself of a lot of worries. By clicking on this mode, you can simply enjoy the pleasant atmosphere and nothing more. In other words, automatic selection occurs required functions depending on environmental conditions. Such products cost a lot, but they are of higher quality and allow you to control the temperature and humidity of the air without even being in the room. The peculiarity of this function is to save energy, since when certain preset levels are reached, the air conditioner will automatically turn off.
By setting a sleep mode, you can also save electricity. For example, if you need the air conditioner to work only during the period of getting ready for bed, and not after that, then you need to set a sleep mode and a timer, when triggered, the equipment will turn off. This will allow you to sleep in silence and avoid oversaturation of the air with heat or, conversely, with cold. In some models this feature is called Comfort Sleep. The timer can be used at any time. For example, if you set it a few hours earlier, in time, before people appear in the room, then by the time they arrive, the optimal temperature will be formed for a comfortable stay.
The heat exchanger defrost function is a mode that allows you to keep the air conditioner in normal operating condition for as long as possible. In other words, when the cooling operating mode is carried out, cold is collected inside in the refrigerant, and the presence of the defrosting function reduces the load on this part.
The process of filtering and purifying air is considered a very popular mode. Today there are air conditioners with step filters that can remove small contaminants and dust, including microorganisms, from the air conditioned. Due to these filters, the air is purified in three stages, in particular, the process of coarse cleaning is carried out, the removal of microbes and pollen from plants and the removal of unpleasant odors. This allows you to maintain not only a pleasant atmosphere in the room in terms of temperature and humidity, but also to eliminate odors that can accumulate and cause discomfort. Such functions are especially important for homes where there are animals, people with allergies, and for retail outlets.
What is DRY for an air conditioner: translation into Russian (video)
It is not at all difficult to understand what an air conditioner is, since it is equipment with the help of which ventilation, cooling, heating and air purification are carried out. The device is extremely useful and far from fancy, provided that high-quality installation and selection of the device have been carried out.
Similar materials
The modes installed in the air conditioner predetermine the capabilities and “talents” prescribed by the manufacturer of this climate control technology. Each model has a set of basic (general) settings for this type of device, but there are also additional features. The modes of any air conditioner are aimed at creating a favorable atmosphere in the house.
Any control is carried out using a remote control, with the exception of window models that have a push-button control panel. However, some of the indicated commands require translation into Russian. For user convenience, graphic icons are shown next to the buttons on the remote control.
The main operating modes of the air conditioner are present in every standard device. Among them are the following:
- cool (translated as “cooling”) – indicated by a snowflake;
- heat (for heating) with a sun icon;
- dry mode (drying mode in any air conditioner) with the image of a drop;
- fan (ventilation) with a fan icon;
- sleep (night mode) with an asterisk designation;
- timer with a picture of a clock;
- swing – the meaning is to change the direction of the curtains;
- lock – lock the remote control from children;
- LED – illumination of the remote control for working with it in the evening and at night.
Cooling
This is the main mission of any air conditioning device. The air conditioner mode is implemented as follows: the refrigerant poured into the device gradually turns into gas, taking heat from the room. This cools the air entering the room.
The following formula will help you correctly calculate the air conditioning power of the purchased device: for one kilowatt the area is from 8 to 10 square meters. Subject to these conditions, the device will provide optimal cooling in the apartment.
Important tip: when this function is launched, the temperature of the split system is set to approximately 16-18 degrees. If it is not enough, connect a fan. The temperature can vary within 0.5 degrees (higher and lower).
When the outside temperature is below zero, it is important to observe the following nuances:
- reduce the power of the device from time to time;
- monitor water drainage;
- Keep in mind that changing modes takes longer.
It is best not to run this function in winter.
Heating
Many air conditioners can operate in heating mode, which is best launch in the off-season when the heating has not yet started. However, in winter, using this feature is undesirable - it will contribute to a decrease in the performance of the device.
In autumn and spring, in heat mode, 3-4 times more heat is released compared to the electricity consumed. But in the winter season, negative temperatures change the properties of freon and compression oil - which is why the device may even fail. Of course, you can purchase a special low-temperature (winter) kit or initially buy a model with a heating element for heating, but along with their use, your electricity bills will also increase.
Why is dehumidification necessary?
Thanks to this function of the air conditioner, excess moisture is removed from the room. Drying makes it easier to cope with heat and prevents the formation of mold. As a result, stuffiness disappears and it becomes easier to breathe.
The dehumidifier operates as follows:
- the air conditioner dries the air for the first 10 minutes;
- the device does not work for the next 5 minutes;
- then increased ventilation occurs for 2 minutes.
It is very important that there are no additional open sources moisture - for example, a swimming pool. Here, air drying capabilities will not help; the use of other specialized equipment is necessary.
The device operates in cycles: from air drying to cooling. As soon as the required temperature has been established in the room, the device begins to dehumidify the air again.
Increased airflow
The ventilation mode in any air conditioner is an indicator of the blowing speed. Air flows are distributed throughout the room, without cooling or heating it.
IN modern models the fan is adjustable - there is a additional TURBO mode. When it is turned on, air currents begin to rush around the room at greater speed. And if you turn off the air intake from outside, then when ventilating, the device will mix different air layers that have different degrees of heating (the air at the top will be warmer, and the air at the floor will remain cooler).
Silent night settings
Another name is night mode: it provides for a reduced noise level at night. In fact the fan just starts rotate at a slower speed, it turns out almost silently. But the required temperature remains unchanged, fluctuations are possible within one to two degrees.
Another name for the night mode is Quiet, comfortable sleep. It is also characterized by reduced energy consumption.
Timer
Another must-have function that will allow you to set the temperature before the user arrives home. It also shuts down the split system after the required amount of time has passed.
Swing
This feature helps uniform distribution of air volumes throughout the room. By the way, the dampers can be fixed in any one position. And for a more clear picture of what is happening with the equipment, the corresponding movements of the blinds are displayed on the remote control screen.
Special abilities
They are not implemented in every model. However, many of them turn out to be very interesting and useful when tested.
How to select the required function
After the information received, all that remains is to find out how to choose this or that function. It's simple:
- select the corresponding button on the remote control;
- if it is not there, then you can select the current mode using MODE, flipping through until we decide on what we need;
- the current temperature is set using the plus and minus buttons;
- The user will not feel the specified action immediately, but after about 5 minutes.
The most popular air conditioners of 2018
Split system Haier AS12NS4ERA / 1U12BS3ERA
Split system Haier AS09NS4ERA / 1U09BS3ERA
Split system Mitsubishi Electric MSZ-LN25VG / MUZ-LN25VG
Split system Electrolux EACS/I-09HSL/N3
Split system Electrolux EACS-07HAT/N3
Split system Electrolux EACS-12HSL/N3
An air conditioner is, first of all, a device for maintaining the desired temperature in a room. The transfer of air conditioners from one mode to another occurs both manually and with remote control. In any price category there are air conditioners with the same functionality.
The presence of operations on it depends on the configuration. As a rule, a household unit has several functions that are designated on the air conditioner remote control in the form of intuitive symbols. What modes the icons and inscriptions symbolize will be discussed in this article.
General air conditioner modes
The main functions of an air conditioning device are found in every classic product, and they have designations of air conditioning modes in the form of symbols and inscriptions on English language. However, most of these words require translation.
In this row, you can determine what functions the air conditioner performs in the form of the following inscriptions and signs:
- Cool – coolness, indicated by a snowflake.
- Heat – heating, there is a sun icon.
- Dry – drying, icon – drop.
- Fan speed – ventilation, a propeller is shown next to the inscription.
- Sleep – night auto mode. Star symbol.
- Timer – timer. Image of a clock.
- Swing – direction of air flow through curtains.
- Lock – child lock button.
When choosing an air conditioner for your home, you usually determine, first of all, energy consumption, and, of course, the minimum possible operations. And although the functions of the air conditioner: air dehumidification, ventilation, ionization and disinfection are not so noticeable at first glance, they significantly increase the comfort of living when using them.
What functions does the air conditioner perform?
The microclimate plays a huge role in a person’s comfortable living. Undoubtedly, being in a room with optimal temperature and normal humidity is much more pleasant than being in a room where it is hot and stuffy.
Although the main task of an air conditioner is to create a cool air flow, it also has other important settings, switching to which will improve the standard of living for household members.
Cooling the room
Each air conditioner is designed primarily to cool the air mass in the room. Switching to this mode is done on the remote control with a button where a snowflake is depicted, which means “cold”.
Good to know! Coolness occurs through a physical process, or, more precisely, the transformation of a substance (refrigerant, freon) from liquid to gaseous state.
When the air conditioner is in auto cooling mode, it turns on when the room temperature rises. After the degree readings have reached their configured value, the compressor in the external module is turned off (if it is a split system). For better comfort, the fan speed in the indoor unit is automatically adjusted depending on the room temperature.
The speed of the outdoor fan changes depending on the condition of the outdoor unit's capacitor. As soon as the moisture release decreases, which means the pressure inside the tubes drops, the compressor turns on and the speed of the fan located outside increases.
In this moment, warm air formed around the condenser is discharged outside, and the ice refrigerant is driven into the evaporator of the indoor module. The heat exchanger is made in the form of a radiator (copper tubes are fastened together with aluminum plates). Cold air, passing through the grilles, is accelerated by a fan throughout the room.
Heating the room
When the temperature in the room drops, the automatic “cooling” mode switches to the “heating” mode. This is achieved through a 4-way valve, which changes the movement of the refrigerant. And as a result, the outdoor and indoor units change places, or, more precisely, the evaporator works as a condenser, and that, in turn, as a radiator.
Most often, the heating function is designated “heat”, which in Russian for an air conditioner means “heating”, “warmth”. A sun symbol is usually depicted next to the inscription. To switch the air conditioner to the automatic “heating” mode, you need to press the button with a miniature image of the sun and the light on the display should light up.
Air dehumidification
Air humidity in residential premises should be 40-60%. Sometimes it happens that this indicator is higher, and increased humidity creates discomfort. The function of dehumidifying the air mass with an air conditioner is simple.
Moist warm air passes through a cold evaporator (heat exchanger) and as a result, water from the air condenses on the surface. Moisture gradually accumulates in special containers and is then removed through the drainage system to the street.
In general, the dehumidification function can be divided into three stages:
- Dehumidification from the remote control button.
- Automatic drying.
- Switching to air ventilation and drying mode depending on the humidity indicators of the device.
Attention! When the air conditioner operates for dehumidification, the air does not heat up and the temperature in the room remains unchanged, contrary to the opinion of some ordinary people.
Fresh air supply
Over the past decade, supply-type air conditioners have appeared on the market. They differ from traditional split systems by the presence of a ducted air duct, in the system of which atmospheric air can be mixed up to 25% of the device’s power.
An air conditioner with such a mixture has a built-in membrane that regulates the operation of the channel. At the same time, her characteristic property is unequal throughput: oxygen molecules pass through such a membrane much faster and better than molecules of other gases.
However, in most devices in the middle and lower price range, in the “Ventilation” mode, the fan of the indoor unit simply runs idle, thereby distributing air around the room, without real ventilation. In devices that are capable of ventilation, there is always another plastic tube that sucks in air from the street.
Silent or night mode
What does the night function mean in an air conditioner? “Sleep Mode”, or translated into Russian as a night timer, creates favorable conditions for sleep. Switching the air conditioner to this operation is necessary in cases where the room temperature is elevated.
After receiving a command for “dark mode”, the fan in the indoor unit begins to rotate at a slow speed, reducing the sounds from the operating device. After a certain time set for sleep, the timer is triggered and the air conditioner automatically switches to normal operation.
Such orderly operation of the unit saves energy and reduces the noise level during sleep, and the smooth transition of the air conditioner from one mode to another allows you to reach the desired temperature in a short time.
Timer
When it comes to such a useful but little-studied function as a timer, you need to understand that it is present in almost all models of air conditioners. With its help, you can not only make automatic transfers from one mode to another, but also configure more economical operation of the entire device.
Turning on the split system at the time when it brings the greatest benefit to the family and turning it off when the household is away makes the timer a profitable and convenient device. Some manufacturers set one for a period of 12 hours, and there are also manufacturers who set several timers to turn on different modes in the air conditioner.
To set the time, you need to press the “timer” button, after which the signal light on the display will light up. The time can be set in 30 minute intervals for up to 3 hours. And in increments of one hour - up to 24 hours. To activate the timer, after setting the time, no later than 10 seconds, press the Set button. Using the timer, you can enable or disable many additional functions on the air conditioner.
Changing the direction of the curtains (Swing)
This operation allows you to change the location of the blinds in the air conditioner, which helps to purposefully distribute air flows throughout the room. To change the movement of the air mass, you need to turn on the Air divestion button (direction of movement) while the air conditioner is running.
And then, after a three-second exposure, press the “Swing” button. After accepting the command to switch to another mode, the horizontal curtains will automatically swing up and down. To raise the blinds of the air conditioner, you need to use the Airswing button.
Attention! If the air conditioner malfunctions, an error code is displayed on the display, which allows you to accurately diagnose the device.
Accessibility and popular features
Now many manufacturers, in order to attract buyers, improve air conditioners with additional functions.
However, some of them especially attract our attention, such as:
Comfort setting. Turning on the air conditioner in optimal mode from +20˚С to +25˚С
Air cleaning. Occurs due to built-in filters, which differ in permeability and in their constituent material. They come with coarse cleaning, which retains medium and large particles of dirt, as well as fine cleaning, ready to retain even pollen. And even the device can be equipped with filters that can absorb odors.
Ionization. Here the room is saturated with ions with negative charges. The function is designed to improve vitality, immunity and well-being of a person.
Defrosting. At the same time, the heat exchanger is not covered with ice for a long time, which is why its performance is greatly increased.
I-Feel. Setting the air temperature using the sensor in the control panel. Such a transfer of climate control equipment is possible in those air conditioners where the temperature relay, which changes the degrees in the room, is built into the remote control.
Air conditioners sometimes use forced ventilation “fan speed”, which is switched to in case of air circulation, ionization or purification.
The functions of each air conditioner are designed to create a favorable microclimate in the apartment.
On a note! If there are unfamiliar inscriptions on the remote control body, you can select the optimal mode using the “Mode” button. You need to press plus or minus according to this command until the transfer to the desired function occurs.
Scroll additional settings depends entirely on the manufacturer and brand of the air conditioner. The designation on the case or remote control of one split system may differ from the same meanings from other manufacturers.
June 20, 2014
Hello. I’m reading your answers about the TEMP button and I don’t understand your answers. I'll say this. 1. I set the temperature to, for example, 26 degrees. 2. after some time, pressing the TEMP button, the house appears, nothing changes either on the screen or in the operation of the split system at all. 3. I press the temp button again, a thermometer icon appears in the house and the room temperature of 27 degrees appears on the WB of the split. after 5 seconds it disappears and the set 26 degrees appears on the split’s WB. 4. I press temp again and the thermometer sign appears outside the house, but no changes occur either on the remote control or on the WB split. question: why does just a house appear on the first press? What does this mean, why on the second press there is a house with a thermometer icon inside, and the temperature in the room is shown for 5 seconds on the WB of the split. And why then another press where is the house with a remote thermometer? it also does not change or change any information, just like when you first press a button with a simply drawn house. What kind of function do extra clicks of the picture have? For example, the set tempo can be seen on the WB of the split and even on the remote control itself. Why this empty house and the house with the thermometer inserted? Why does the tempo in the room disappear after the second press after 5 seconds. How in general? see the temp in the room again? again in a circle, poke this temp button 3 times? How crazy is the way this function is designed. And one more question: what is the maximum outside temperature at which the split can operate?
/ Eugene /
Answer
Hello!
In order to understand the TEMP button, let's look at the translation of the instructions:
When turned on, the default is to display the set temperature (according to the customer’s request to show the temperature; if such a request is not received, the icon will not be shown on the control panel). Press this button (when showing "house empty") and the preset temperature will be shown; (when showing “House with a thermometer inside”) the room temperature for the ambient air will be shown; “House with a thermometer outside” - the current display status does not change. If the current display shows room temperature for ambient air, then when another signal is received from the remote control, the preset temperature will be shown, and after 5 seconds the ambient temperature will be shown.
In short, the TEMP button allows you to view the set and actual temperature in the room at any time.
Not all air conditioner models have the ability to read the temperature outside the room, so there is no change when the house icon with a remote thermometer appears.
The maximum air temperature at which the outdoor unit of the air conditioner can operate is +43...+45 degrees C.
Dantex Technical Specialist