You don't necessarily need to use external speakers to enhance the sound of your Android devices to the maximum level.
You can download a working sound volume amplifier program for your Android smartphone or tablet absolutely free of charge.
The native app that controls your phone's volume also provides additional gain and you can get good quality sound using the built-in equalizer (if not, you can download it).
There are just a few points here. Much, and perhaps “everything,” depends on your Android device.
It goes without saying that a low-quality device, usually very cheap by nature, cannot reproduce high-quality loud sound.
To stop wasting time searching engineering settings, through complex phone menus, you can make the sound louder using power amplifier programs, which you can download right here, more precisely on this page a little lower.
You can download two amplifiers for Android in Russian. Why two? Because I tested Samsung Galaxy Android 6.0.1 and LG with Android 5 on a phone, and you may have a tablet with Android, for example, 2.2, 4.2, 4.2.2, 2.3 6 or another.
My sound from headphones and speakers has become 23% louder, even on the radio, not to mention MP3. I advise you to download and install both amplifiers and experiment - whichever one is the best, use it in the future.
On the play market, there is an equalizer for music, only it is on English language, and I didn’t bother with it, but chose it only through experiment best amplifier in Russian, or rather two. Here they are below - you can download them immediately.
Download the first sound amplifier for Android in Russian
By installing this program your phone call should be louder than ever before.
Developer:
unknown
OS:
android
Interface:
Russian
Download the second sound amplifier for Android in Russian
This sound amplifier is a simple and at the same time effective program for mobile phone android.
After installation, you will not need to look for sound adjustments - everything happens with one click of your finger.
NOTE: both programs will not cause any harm to your devices, only depending on the manufacturer, the effect may be zero - there were no glitches on my devices. Good luck.
Developer:
unknown
OS:
android
Interface:
Russian
Many smartphone users have operating Android system Often there is a problem with sound. Most models have a too quiet ringer, which is difficult to distinguish on a noisy street or in transport, or it is difficult to hear music in headphones. This is where all sorts of manipulations begin to enhance the sound on Android, first on your own, then with the help of friends and forums about modern gadgets.
But even after this, there are still those who haven’t solved the problem and are still dissatisfied with the sound of their phone. This article is for you.
Helps enhance the sound Android program Volume+ is an interesting program for increasing the volume of your Android phone. It is presented in Google Play. To everyone's delight, the application is free.
After downloading and installing Volume+, launch it. The menu is in English. You need to select the “Speaker Settings” item. This will take you to the menu. Here you need to check the boxes for “Speaker Modifications” and “Virtual Room Effect”.
Then click on the items “Volume Level”, “Bass Enhance”, “Virtual Room” one by one, where all levels are increased by one. You shouldn't set +4 right away. In this case, malfunctions and glitches are possible, which can then be eliminated only by uninstalling the program and removing the battery. It is better to gradually select the optimal volume.
Is there also another option to increase the sound volume? An equalizer will help here. To do this, you need to go to the GooglePlay market and download the equalizer you like. For example, JetAudio.
In fact, JetAudio is multifunctional program. There is a player of various formats, a ripper, and a converter. Among other things, there is a good equalizer.
To increase the volume of ringtones, games, videos and music, you need to launch the program. Open equalizer. The default mode is Normal. You need to open the “Custom” tab and enlarge the required columns as you wish. Try playing any music. You will hear a noticeable difference.
Important: do not touch the 60 Hz speaker!
It is also necessary to remember that as the sound volume increases, the sound quality will deteriorate. Possible wheezing. Setting it too high can even burn out the speaker, so be careful! The video also explains how you can do without programs and do it through the engineering menu.
An optimally selected sound volume allows you to hear an important call, watch a movie or listen to music with pleasure. You can adjust the sound on Android separately for applications, notifications, calls and players. The user has several ways to increase the volume, including through the engineering menu - they are described below.
Adjusting the volume in the Android device settings
On smartphones and tablets running Android, you can adjust the sound using the volume key. The key is a “rocker” - pressing up increases the volume, and clicking down decreases it. If an application or movie is open at the moment you press the key, the media volume will change, and if the desktop, the call volume will change.
If the sound spontaneously switches to “Quiet”, check your smartphone for viruses. Remove applications that have access to volume control and evaluate the situation. Also check if the “Ring louder in your pocket” mode is enabled. To do this, go to settings, select “Calls - Call louder in your pocket.” If necessary, disable the feature.
You can configure sound settings in the standard settings of your smartphone or tablet:
- Go to Settings and select Sound.
- Select "Volume".
- Use the sliders to adjust the volume values for each type of sound - notifications, calls, applications.
- Click "OK" to save the settings.
Depending on the version of Android, the settings item may be called “Melodies and Sound”, Sound, etc.
Gallery - how to increase volume using Android
Method 1: Pull out the notification panel 
Method 1. Click on the settings icon and in the panel that opens, adjust the volume by sound type 
Method 2. Go to the settings of your smartphone or tablet 
Method 2: Select "Sound - Sound Volume" 
Method 2: Adjust the volume and click OK
Setting up the sound of headphones and speakers using phone or tablet applications - instructions
For users who don't have enough standard volume sound on a smartphone or tablet, tone amplifier programs have been developed.
Volume+
Volume+ is a program that allows you to increase the volume of Android 2.3 and higher melodies. Works with the device profile, as well as with a headset and hands-free. The developers offer two versions of the program - free and paid. According to reviews, the first increases the volume by 20–30%, the second by 40–50%. The sequence of sound adjustment in the application:
- Install the program from Google Play and run it. There are three or four apps with a similar name in Google's storage. The developer of the required one is Meltus.
- In the program window, check the box next to Speaker Modifications.
- Go to the speaker settings section.
- In the Volume Level menu, change the audio level. At the maximum setting there may be distortion, so check the audio quality and reduce the setting if necessary.
- In the Bass Enhance menu, adjust the bass level.
Sound parameters are adjustable by level
To adjust the sound in a headset and hands-free, perform similar actions in the corresponding sections of the menu.
Upon completion of the setup, the application will save the settings and will work in background. You won't have to adjust the sound after rebooting the gadget.
Video - changing sound settings in Volume+
How to raise the volume level in Volume Booster Plus
A booster program that, by pressing one button, increases the sound volume of a smartphone or tablet to the maximum possible values provided operating system. Instructions for use:
- Download the program from the Play Market and install it on Android OS.
- Open the application. You will see a demonstration of the program's capabilities. Click Next and then Boost several times.
- Wait for the process to complete - the program will display a message on the screen indicating by what percentage the sound volume has been increased.
The program does not support preset profiles and does not have an equalizer. Free and easy to use. The only drawback is the abundance of advertising.
Gallery - Using Volume Booster Plus
Step 1: Click Start 
Step 2: Click Next 
Step 3: Click the Boost button 
Step 4: Wait for it to finish
Volume Ace Free makes your music and calls louder
Volume Ace is a functional program for adjusting volume on Android. Allows you to change sound parameters, create sound profiles and change them on a schedule, and also blocks accidental changes in sound volume outside the application. To adjust the sound:
- Download the program and run it. In the main window, use the sliders to adjust the volume values.
- You can turn off all sounds by clicking on the vibration icon at the bottom of the window.
- For calls, notifications and alarms, select ringtones by clicking on the icons to the left of the slider tracks one by one.
- When finished, click the “Save” button.
- The program will prompt you to update your current profile. If you agree, click “OK”, and if you want to create a new profile, click “Back”, and then click the three dots at the top right of the display.
- Select "Add Profile" and save your settings.
Scheduled change of sound profiles is a function necessary for business people who do not have time to monitor the status of their mobile phone during negotiations or travel. To set the timer:
- In the main window of Volume Ace Free, click on the three dots at the top of the screen.
- Select Scheduler.
- Click on the plus at the top right.
- Set the desired sound profile and select the duration.
- Set up a repeat - daily or by day of the week.
- Click OK.
To change profiles, set each one with its own duration in the Scheduler.
You can get to the application settings by clicking on the icon in the form of three dots in the main window and selecting “Settings”.
Gallery - how the sound is adjusted in Volume Ace Free
Step 1. Install the program 
Step 2: Adjust volume settings 
Step 3. Save the settings to a new profile 
Step 4: Go to Planner 
Step 5. Set up a timer for changing sound profiles 
Step 6. Block the ability to change the volume outside the program
Adjustment via the engineering menu
The engineering menu allows you to produce fine tuning sound parameters and remove restrictions maximum volume.
Root rights to enter the engineering menu
Some versions of Android require root access to enter the engineering menu. To quickly get root rights, use Kingo applications Android Root or Framaroot. Instructions for rooting a smartphone or tablet using Kingo Android Root as an example:
- Download mobile version programs from the developer's website.
- In the gadget settings, allow the installation of applications from unknown sources.
- Install and run the program.
- In the main window, click the One click Root button.
- Wait for the process to complete - the device will automatically reboot.
How to enter the engineering menu on Android
After obtaining root access, go to the engineering menu using the Mobileuncle Tools or “Run Engineering” applications MTK menu" If applications don't work, use engineering codes:
- Open the dialpad.
- Enter a combination of numbers to enter the menu.
Table - Combinations for entering the Android engineering menu
| Device manufacturer | Team |
| ZTE, Motorola | *#*#4636#*#* |
| Smartphones and tablets with a MediaTek processor (most Chinese devices) | *#*#54298#*#* |
| *#*#3646633#*#* | |
| HTC | *#*#3424#*#* |
| *#*#4636#*#* | |
| *#*#8255#*#* | |
| Samsung | *#*#197328640#*#* |
| *#*#4636#*#* | |
| *#*#8255#*#* | |
| Prestigio | *#*#3646633#*#* |
| Sony | *#*#7378423#*#* |
| *#*#3646633#*#* | |
| *#*#3649547#*#* | |
| LG | 3845#*855# |
| Huawei | *#*#2846579#*#* |
| *#*#14789632#*#* | |
| Alcatel, Fly, Texet | *#*#3646633#*#* |
| Philips | *#*#3338613#*#* |
| *#*#13411#*#* | |
| Acer | *#*#2237332846633#*#* |
How to increase the maximum sound level
Engineering menu in different models smartphones differ, but the structure remains similar. Once you enter the menu, you will see settings sections - find the Audio item. The section includes subparagraphs:
- Headset mode. Headset volume control.
- Normal mode. General settings speakers of a smartphone or tablet.
- LoudSpeaker Mode. Hands-free mode.
- Headset LoudSpeaker mode. Loudspeaker mode when a headset is connected.
- Speech Enhancement. Talk mode without connected devices.
For each mode, it is possible to change the volume. Can be configured:
- Mic - microphone sensitivity;
- Sph - speaker volume;
- Media - volume of multimedia playback and sounds in applications;
- Ring - call volume;
- Sip - Internet call parameters;
- FMR - FM radio.
To configure a specific setting, select it from the menu. For example, to optimize the sound of multimedia files, select Media. Below the selection line you will find options to configure - levels and volume values. Complete the setup:
- There are 7 volume levels in total, each corresponding to one press of the rocker key. Level 0 is the quietest level, level 7 is the loudest.
- Select level 0 and set the acceptable volume for it in the field on the right - no more than 255. Click the Set button to save the settings.
- Do similar steps for each level.
- Set the maximum volume value for the profile - it will be the same for each level. Click Set.
Rewrite the manufacturer's volume settings before changing them. If you do something wrong, you can always return the volume to default.
Once you've finished setting up your media, move on to the next steps. The volume control method for the microphone, speakers, and headset is the same.
Gallery - How to adjust the volume in the engineering menu
Step 1. Open the "Audio" section and select a mode to configure 
Step 2: Set up the microphone and speakers one by one 
Step 3: Set volume levels for each device 
Step 4: Set the current and maximum volume values
How to increase the quiet volume of a ringtone
To increase the ringer volume, work with the Ring item in Normal Mode. Change the values for each volume level one by one. Don't forget to click Set to save the settings. Remember - when the maximum values are set, the sound quality decreases significantly.
Increase speaker volume (during a call)
If you can't hear the person you're talking to on the phone, try increasing the speaker volume. Go to the Normal Mode section and select Sph. Increase the values for each volume level by 10–20 units. Set the maximum volume as desired.
Change microphone sensitivity
You can set up your device in the same way if the other person can’t hear you. In the Normal Mode section, select Mic and set the sensitivity to be the same for all levels - approximately 240. Save the setting for each level in turn.
Microphone sensitivity when recording video and audio
If you think that videos and audio recordings are not loud enough, go to the LoudSpeaker Mode section in the engineering menu and select Mic. Make the settings in the same way as the previous point.
When the setup is complete, exit the menu and restart your smartphone or tablet. The device activates the new settings.
Video - increasing the volume through the engineering menu
Tricks to boost sound on Android
An external speaker solves the problem of insufficient volume on a smartphone or tablet when other methods do not help. Speaker - small device with a 3.5 mm plug, - inserted into the headphone jack or connected via bluetooth. Cost - from 700 rub.
A lifehack to increase the volume - while playing a video or playing music, position the smartphone with the speaker towards the painted wall. The sound will be reflected from the surface and at the same time amplified.
Is it possible to remove the volume limit?
Android smartphones have a maximum volume limit to protect the device's speakers and users' eardrums. The engineering menu allows you to increase the upper limit - the Max item. Vol. Maximum value- 255 units. It is impossible to set the value higher, and it is not required - otherwise the speakers will not stand it.
If you do not want to contact service menu, use the Volume Unlock application:
- Install the program from the Play Store.
- Go to the application and activate the Enable Volume Power item.
Unlock volume limitation by turning on Enable Volume Power
The program does not remove the limitation, but increases the maximum value.
Test the methods described above to increase the volume and choose the best one for your device. Handle carefully engineering menu- incorrect settings can lead to problems with the sound of your smartphone or tablet.