In order to use your computer's resources more efficiently, you need to correctly configure your PC's energy consumption settings. Windows 10 in terms of energy saving settings is not much different from previous versions of the operating system.
In order to go to the required “Power Options” section, you need to go to the control panel. You can do this, for example, by clicking right click mouse on the Start button. And select “Control Panel” in the context menu or - if you have a laptop - right-click on the battery icon in the system tray. After that, find the “Power Options” item. To make it easier for you to search in the control panel, in the “View” item, switch the view from categories to icons.
By default, Windows has three performance modes. Mode " Maximum performance” allows you to enjoy the system to the fullest - however, the energy consumption in this case will be considerable. On the contrary, “Power Saver” allows the device to run longer on battery power. True, at the expense of power. The third option is a trade-off between energy consumption and power. Each mode can be customized at your own discretion. To do this, determine the required scheme and select “Configure power supply scheme”.
Basically, adjusting the power settings is for configuring the computer's sleep mode: you select the optimal time interval for the PC to go to sleep and turn off the display to reduce the computer's power consumption.
Additional power settings allow you to fine-tune your power consumption. For example, you can clarify whether your system will require you to enter a password when waking up, after what period of time the PC will go into hibernation, whether you need to leave power to the USB ports in sleep mode, how the system will react to pressing buttons on the system unit.
If you want to create a power plan from scratch, you need to select the “Create a power plan” option. This item can also help if your power settings go haywire when booting the system. The Setup Wizard will prompt you to select one of three default modes you want to edit and allow you to select a schema name. By optimally customizing each item of additional system settings, you can extend the battery life of your laptop or reduce the amount of energy consumed by a powerful desktop PC.
Finally decided to upgrade to latest version OS from Microsoft. I initially knew that after installation I would have to configure Windows 10 for maximum performance. I immediately remove various visual effects, smooth transitions and all that. Only efficiency and speed. What needs to be done for this? I'll tell you now.
Setting up visual effects
Right-click on the “This PC” icon and select “Properties”. Previous Windows versions At this stage we set up the same way. That's why I do it intuitively. On the left I click the bottom menu item “Advanced system parameters”. In the window that appears, click the top “Options” button.
The picture shows which items I ticked and which ones I removed. At this point, I have completed setting up the performance of my working environment. By clicking the "OK" button, I forget about this setting until I exit new version Windows.
Power supply
Having a laptop for mobility and desktop computer to work at home, I, however, did the same settings for the power supply in both places. That is, with an emphasis on productivity. No savings on electricity. Initially, the power plan in Windows 10 was even called “Balanced”. Timers have been set for the screen to fade out and the computer to go into sleep mode. It even indicates the time after which HDD must stop. It's of no use to me. I set the screen fading to “Never” and turned off sleep mode too.
Then I assigned pressing the computer's shutdown button to turn off the power without prompting.
After some time, the System begins to slow down. I noticed this a long time ago, and I’m not the only one. I don't think so new Windows 10 will be an exception. Having noticed the first signs of deterioration, you have to defragment the disks. This is a long process, but necessary. I usually set this task at night. In the “Control Panel” in the “Administration” section there is the required “Disk Optimization.
Autoload
The next step is to look into Startup. This needs to be done periodically, after each installation of new programs. Some of them have a habit of starting every time you turn on the computer, which leads to increased system boot time and RAM load.
Right-click on the taskbar to call context menu and click “Task Manager”. On the “Startup” tab you will find what you are looking for. Just now installed system there will be nothing there. But as soon as I install the same Skype, he will immediately register there. It should be removed.
Let me summarize what has been done:
- Visual performance – removed all effects.
- Power supply – no savings.
- Defragmentation - let all files be in their place.
These are not all the actions that will speed up the operation of the System, but the most basic ones.
learnwindows.ru
Setting up Windows 10 for maximum performance
Hello everyone, this article will talk about how to configure Windows 10 for maximum performance.
What is meant by the concept of maximum performance: this is the computer running at 100%. For example, your monitor often goes off and your computer goes into so-called sleep mode to save energy. And after waking up, it requires you to enter the password again if you have one!
This is not entirely convenient and I personally am not happy with this small drawback, so now I’ll tell you how to eliminate it.
Step-by-step setup:
To do this, go to the Control Panel
Select Power Options
In the left toolbar, click on the Request password on wake-up tab
In the parameters of the power and sleep buttons, indicate that no action is required, and accordingly click Save changes
In order to create a specific power management scheme. Select the High performance item, leave the scheme name as default in the field and then move on to the next section by clicking Next
In the control scheme for putting the display into sleep mode, in the Turn off display field, set the Never option and click Create
But that's not all, in the circuit that we created we need to make a couple more settings.
To do this, in Setting up the power supply scheme
Changing Advanced Power Settings
Then go to the item Hard disk – Disconnect the hard disk through – Status (set equal to 0 min)
Then click OK
That's all, if you have any questions, ask them in the comments!
mixprise.ru
Tuning Windows 10 for maximum performance to speed up your PC
MiaSet.com » Training » Windows
Windows setup 10 for maximum performance is necessary for your computer to work perfectly. All necessary settings Windows tenth version occurs during the installation of the operating system on the computer.
But there are additional settings that many users would like to make but don't know how to do. How to configure Windows 10 for maximum performance?
How to disable or delete cloud storage
This innovation does not suit all users; people are distrustful of the fact that their personal information will be stored in an unknown place. And the annoying service that runs in parallel with the operating system irritates many.
There are two ways to get rid of storage:
Let's look at both.
Steps to take to disable cloud storage.
Method one
- You need to go to notifications.
- Select the cloud icon and click on it.
- Next you need to select parameters.
- In this tab, you need to uncheck the box next to the option: “Automatically launch One Drive when you log in.” operating system».
- In addition, if the user logs into a system that is connected to the cloud, then in the settings you must select the column: “Delete connection with cloud storage data."
Second way
- Press the Win plus R keys.
- In the window that appears, you must enter the command: “gpedit.msc”.
- The next step is to select the “PC Configuration” section.
- Next is the “Administrative Templates” subsection.
- Then "OS Components".
- And finally “One Drive”.
- In the window on the right there will be a single inscription: “Prohibition of using One Drive for storing data”, you need to click on this column.
- The next step is to switch the state to: “Enabled”.
Setting up Windows 10 for maximum video performance:
MiaSet.com
How to configure Windows 10 for maximum video performance
Greetings, dear friends. Let's talk today about setting up Windows 10. Since it is becoming more and more popular, and I recently set it up on my tablet. Also, if you just installed or bought a device on Windows 10, then in any case it’s best to configure it.
Why do you need to configure Windows 10?
We won’t delve too deeply into this topic, we’ll just list a few sharp reasons to understand how to set up Windows 10:
- Initially, the system does not work 100%. You just can’t please the user, there are millions of them, and the creators of the operating system want to show all the possibilities, or the maximum possible. And everyone’s needs are different, so it’s better to tailor the system to suit your loved one.
- Services and applications are running that you probably never use, and they are loading the system.
- Perhaps your computer is old or simply weak, but you want to work on Windows 10.
- Powerful games require maximum performance.
- Over time, the system becomes cluttered with various types of debris and needs to be cleaned.
- Maybe standard means and the programs are not suitable for you, some need to be disabled, or maybe just change the shell, the type of system.
- You just love to change something with your own hands, always and everywhere 😮 .
After simple steps, you can safely work in the system and periodically perform cleaning and adjustments. This way the system will work for a long time without failures or critical errors.
System update
There is a lot of controversy about whether it is necessary to update the system. In my opinion it is necessary, this is correct. After all, very often improvements are made, some errors are corrected, all this improves the system. Yes, I don’t argue, it happens that an update is installed, and the system starts to glitch. Let's look at how to configure Windows 10 for updates.
I haven’t noticed this on Windows 10 yet, but in any case, you can rollback it as soon as you notice it. Besides, faster system It will break because you don't update it. Since the programs you use are reinstalled in any case, or over time you simply install other new programs, and the system is hard to work with, all sorts of problems may arise, but this is a separate topic for discussion.
And so, we need to go to Settings and click “Update and Security”. Next, “Check for an update.” And if there are updates, we immediately download and install them.
Windows update 10 and setting up updates After installing all the updates, click Advanced options below and at the very top change the option to “Notify when a reboot is scheduled.” This is necessary so that the system does not restart itself. Otherwise, you never know, perhaps you are playing at an important moment, or you are having a serious event, and the system itself took over and restarted - crash. Whatever it is, change the parameter.
Changing update settings We also put two checkmarks below. First, so that everything is updated windows products. The second is to prevent the system from starting downloading updates itself. This is necessary so that you can manually download updates exactly when you need them. For example, when the computer is idle, you can enable downloads and updates.
It’s just that during downloading and updating the system is loaded, and if the Internet is also weak, then everything takes a long time. Some people are starting to get confused, saying that the system is slow, which means it’s bad, but in fact it’s just an update.
Below, click on the option “Choose how and when to receive updates.” Turn off the parameter as in the screenshot below. This is to prevent updates from being downloaded from different sources.
remove loading from different places You can also immediately disable Windows Defender (menu on the left). I use third-party antivirus software, so I don't need Defender. By going to this tab, turn off three items, as in the screenshot.
By the way, about how to choose good antivirus, can be read here.
disable defender Disable password upon login.
This does not affect performance, but personally I don’t need this function, maybe you don’t need it either, then it will come in handy. Although this still relates to the topic of how to set up Windows 10.
This function is not necessary, if you need a password, then do not disable it, now let’s move on and figure out how to set up Windows 10.
Setting up System parameters.
Before setting up, it is better to check whether all drivers are installed, if not, install them. And you need to install all the programs you use. Only then do adjustments and cleaning.
Now we will turn off notifications and remove some not required applications.
Configure Privacy settings.
Now go to the Privacy option (Start - Settings - Privacy). Look carefully here, turn off what is not useful to you. We continue to answer the question of how to configure Windows 10, so here we disable what applications can link to. In principle, I always turn off almost everything and don’t worry. I grant access to some applications separately when they ask.
And most importantly - Background applications. Here we turn off everything that we don’t use every day, constantly. The fact is that everything that is turned on always works, otherwise we don’t need what we don’t use, we turn it off so as not to load the system.
Disable background applications Editing system properties.
Now we open the launch - system. On the left, select the item - System Protection. We will enable it on drive C, or on the drive where your operating system is installed. To do this, click on required disk, I have C, click configure below.
Now the point is to turn it on and use the slider below to set it to approximately 5-8 GB, this is quite enough. and click OK.
Enable system protection on the system disk We continue to figure out how to set up Windows 10. Now, on the left under System Protection, select - Advanced system settings, Performance - settings.
Performance settings The visual effects option will open, put a tick on Provide best performance. Then all the checkboxes in the lower list will be removed. And now we put only 5 checkboxes in this list, as in the screenshot. You won’t see much of a difference, and the system will load less.
customize visual effects Now next to Visual effects Click the Advanced tab and below In the Virtual memory section, click the Change button...
change the swap file Now select from the list system disk, I have C and below check the box Without paging file. But on another disk we put a paging file twice as large as yours random access memory. For example, you have 2 GB of RAM, then set the swap file to 4 GB or 4000 MB. We write in two fields, opposite the item Specify size.
Changing the System Configuration.
We continue and answer the question of how to set up Windows 10, describing everything as I do it myself for my computer, which faithfully serves me for a long time and without failures.
- Service wireless communication Bluetooth (if you don't use it),
- Service Bluetooth support(if you don't use it)
- Cryptography Services,
- Fax machine,
- Geographic Location Service,
- Manager of downloaded maps,
- Telephone communications,
- Dispatcher automatic connections remote access,
- Store demo service,
- Task Scheduler,
- Smart Card Removal Policy
- Setting up a remote desktop server,
- Touch keyboard service (only if you don't use it, for example you have a tablet),
- Telephony,
- Remote Desktop Service,
- wallet service,
- windows store service,
- X-box Authentication Manager,
- Saving games on X-box Live,
- X-box Live network service.
Now click apply.
Cleaning up unnecessary files.
Even if you have just installed the operating system, it is necessary, even necessary, to clean your disks of excess debris.
To do this, go to my computer (this computer) and on the system drive, I have it C, right-click, and click properties in the menu. Below there will be a “Disk Cleanup” button, click it and wait as long as necessary while the system scans the disk.
Disk Cleanup Next, a window will open, put checkmarks everywhere, click the “Clear” button below system files“, also check the boxes everywhere and click OK. The procedure takes time. It is better to do this cleaning more often, about once every 3 months. The first clean takes a long time, the subsequent ones are faster. There is nothing to be afraid of, this tool is very reliable and high quality.
select checkboxes everywhere We continue to figure out how to set up Windows 10. Next, after cleaning, also in the properties of drive C, click the tab next to it - Service. We check for errors. Even if for the first time he says that no verification is required, we do the verification. If it finds something, the system will fix it or notify you and click fix.
Disk check Go to Optimize and defragment the disk, Click Optimize. In the window that opens, click on the system drive, mine is C. And below, click Analyze. After the process is finished, click Optimize next to it. The process takes time.
Disk optimization These steps need to be repeated with your computer from time to time. This way it will work faster. After optimization we close everything.
Then press the Win+R combination again to open the Run window. where we write %temp%, a window will open where we select all the folders and delete them. We skip what is not deleted.
Cleaning the temporary folder This opens a closed folder with temporary files; they need to be cleaned periodically.
Power settings.
We continue to figure out how to set up Windows 10. Go to Control Panel - Hardware and Sound - Power Options. Here at the bottom we put a tick on “High performance“.
power settings If you have a simple desktop computer, then you don't need to do anything else. If you have a laptop or tablet, then it is better to leave the “Balanced (recommended)” scheme and just quit. This will save battery power.
You can also click on “Sleep mode settings” on the right and set there to use both Network and Battery, never go into sleep mode. Again, if the computer always runs on network power.
Setting sleep mode I think we’ve done all the basics of how to set up Windows 10. Of course, there are actually a lot of settings, but we have done the most basic things. Now the system will work more stable. The main thing is not to forget to periodically clean and optimize your disks. It is garbage that causes big problems.
In addition, it is better to customize the Start menu itself. Reduce some icons and, most importantly, remove those icons that you do not use.
There should not be many shortcuts and folders on the desktop, all of which load the system. Try to clean up your desktop and disks as you work. This helps the system work quickly.
As an alternative to antiviruses and various cleaning programs, I advise you to install 360 total security. It protects your computer well and also cleans it. Besides this there is a lot of other interesting things.
Among other things, I strongly advise you to read the article: “How to clean your computer so that it doesn’t slow down.” We also wrote a lot about optimization.
That's all for me, stay with us further. Subscribe to our articles. Write in the comments, I will answer everyone and share the article on in social networks. Bye everyone.
Bonus I put a video about detailed settings system, very useful, consists of 2 parts.
Power Throttling activates automatically when your portable device isn't charging, meaning the quickest way to disable this feature is to plug your device into a power source.
You can also control the power regulation on your system by clicking the power icon in the notification area and using the slider to change the power mode.
- Battery Saving
- Improved battery– power regulation is activated
- Optimal performance– power regulation is activated, but in gentle mode
- Maximum performance– power regulation is switched off
If you are using Windows 10 Pro, you can disable Power Throttling using the editor group policies.
- Enter gpedit.msc and click OK to open the Local Group Policy Editor.
- Follow the path: Computer Configuration > Administrative Templates > System > Power Management > Power Management Settings
- Double click on policy Turn off power regulation.
- Select the “Enabled” option, click “Apply” and “OK”.
- Restart your computer.
At any time you can reactivate power regulation, follow the same steps, but in step 5 select the “Not configured” option.
The Group Policy Editor is not available in Windows 10 Home, but you can do the same thing using the Registry Editor.
Note
Changing the registry incorrectly can cause serious problems. It is recommended to create backup copy Windows registry before performing these steps. From the Registry Editor menu, select File > Export to save a backup.
- Use a combination Windows key+ R to open the Run command window.
- Enter regedit and click OK to open Registry Editor.
- Go to the following path HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
- Right-click on the “Power” folder, select New > Partition.
- Name the section Power Throttling and press Enter.
- Double-click the created key and select New > DWORD (32-bit) Value.
- Name the parameter PowerThrottlingOff and press Enter.
- Double click on the created key and set the value 1 , then click OK.
- Restart your computer.
Once these steps are completed and the PC is restarted, power throttling will be disabled for all applications in all power modes.
At any time you can reactivate power throttling, follow the same steps, but in step 4 delete the PowerThrottling section.
How to disable power throttling for individual processes
Windows 10 uses an intelligent approach to determine which processes need to be limited to save battery and extend time battery life. However, sometimes limiting an application can be wrong and can lead to unwanted performance issues.
In these situations, you can disable Power Throttling on a per-app basis without having to disable the feature entirely.
Style="width:750px;height:auto;">
- Open the application Options.
- Go to section System > Battery.
- Select link See which apps are impacting your battery life.
- Select the application whose settings you want to change. Energy consumption of applications that are marked Under Windows control controlled by Windows. If checked User controlled, then the user manually configured these applications.
- Uncheck “Allow Windows to decide when this application can run in background”.
- Uncheck “Reduce the amount of tasks an application can perform while it is in the background.”
Once these steps are completed, power regulation will be disabled for the specific application.
Energy/power throttling is a feature designed to optimize battery life on portable devices, so it is not recommended to change the settings for this feature unless you have problems with applications running when the feature is active.
Found a typo? Highlight and press Ctrl + Enter
The latest version of Windows OS is designed not only for desktop PCs, but also for laptops and tablets. Accordingly, as never before topical issue increasing the battery life of the device. To achieve this, it is necessary to make correct settings power supply in Windows 10.
To start optimizing your power options, open Start and select the menu Options" You can also access this menu using shortcut keys Win+I.
In the Options window, go to the section System».
In the left area of the window, go to the " Battery Saving", and on the right open the link " Battery usage».
In this window, the system will display application usage statistics. Based on this data, you will be able to identify which applications are using up the most battery, which applications should be blocked from running in the background, etc. Click the arrow in the upper left corner to go back one position.
Now, at the very bottom of the window, go to “ Battery saving settings».
Battery saving mode allows you to increase the battery life of your laptop or tablet by disabling push notifications and stopping programs from running in the background.
By setting up this mode, you can specify the remaining percentage of charge at which energy saving will turn on, and also add programs to the list of exceptions that can run in the background and send push messages regardless of the charge level.
Click the back button. Now, in the left pane of the window, open the “Power and Sleep” tab. To save battery power, set the screen's battery life to a minimum. Just below, specify the idle time for the device, after which it will go into sleep mode.
In the same section, click on “Advanced power settings” to display the classic power management window. Here, in addition to the time the screen turns off and the device goes into sleep mode, you can adjust the screen brightness level depending on its operation: from the network and from the battery.
Type the word "Scheme" into the Start menu text box and select "Change power plan." Alternative: Right-click on Windows icon and go to the Power Options menu bar. Here, in the “Power and sleep” section on the right side of the window, click on “Advanced power settings”.
By default, the system is set to a balanced power supply scheme, that is, a balance is set between performance and energy consumption. The “Energy Saving” scheme is provided for the battery mode. In this mode, the screen turns off faster and the device goes into sleep mode.
If you want to customize power consumption, click on the “Customize power plan” link. In the window that opens, you can change the preset time or completely disable some options. This prevents, for example, the device from going into sleep mode or complete shutdown screen. Click on “Save Changes” and the settings will be instantly activated.
Additional settings can also be found under Change advanced power settings. IN " Additional options", for example, you can select the option to disable hard drive after a certain period of time. This saves battery, but when returning to work you will have to wait a few seconds for the device to “accelerate”.
The Power Buttons and Lid option lets you choose what happens when you close the laptop's lid. Select from the following options: No action required, Sleep, Hibernate, or Shut down.
If there is no activity for more than three hours, Windows will in any case send the device to hibernation mode, regardless of whether it is powered from the network or from the battery.
If you want to disable this option, then find the “Sleep” and “Sleep after” item in the settings and set the “Never” option. Confirm the settings by clicking on “OK”. If you click on the “Restore Defaults” button, you can undo the changes you made.
Photo: manufacturing company