Make sure that the phone to which you plan to connect the wireless headset is equipped with Bluetooth technology wireless transmission data. If your phone does not have this technology, you will not be able to connect a wireless headset to it. You can check the presence of Bluetooth in your phone by reading its instructions, or by looking at the phone menu.
Turn on the wireless headset. It is necessary to press the multifunctional button on it and hold it until the operating mode indicator turns on. Then you should turn on the phone with which you want to connect the headset and turn on Bluetooth. In the Bluetooth menu, you need to run the command to search for compatible devices. The scanning process, depending on the speed of Bluetooth on the phone and headset, can take from a few seconds to a minute.
Once the scan is complete, the hardware compatibility list will be available. From it you need to select a wireless headset. You may need to enter a passcode for Bluetooth data transmission. In this case, you need to enter the code specified in the instructions on how to set up the wireless headset. Usually it is 0000. After entering the code, the connection with the wireless headset will be established. You will only need to enter the code for the first time, it will not be required in the future.
When the connection between the phone and the headset is successful, the indicator on the headset will start blinking. Now you need to go to the Bluetooth menu, then to the list of paired devices and select a wireless headset. So the headset is plugged in and ready to go. Such manipulations need to be performed only once. In the future, you just need to go to the Bluetooth menu, then to the list of paired devices and select a headset.
If you are not sure how to set up your headset to connect to your computer for Skype chatting, try the following steps. First, you need to put your headset in discoverable mode. Secondly, run a program on the computer to search for Bluetooth devices. If there is a shortcut "Bluetooth Places", you need to click on it, and if not, click right click mouse on the Bluetooth icon and select "open Bluetooth neighborhood" or "Add device".
Next, you need to carry out the process of pairing Bluetooth devices. The final step is to launch and Skype setup to work with a wireless headset. To do this, open the application settings: Tools, then Options, and then Sound Devices. In the Audio Out and Audio In fields, select the value Bluetooth audio... In order to start communicating, you need to activate the connection between the headset and the computer. To do this, open the "Bluetooth environment" and double-click on the headset icon.
Some older phone users find it difficult to install a headset. The interface of these devices is far from perfect, but they are reliable, inexpensive and therefore still popular. This article will show you how to set up a bluetooth headset to work with some popular brands of phones.
How to set up a headset: instructions
First, make sure both the phone and the headset are turned on. Then put the headset in the device search mode.
On the Platronics M2500 headset, this is done by setting the multifunction wheel to the "up" position and pressing the bell button. If you have an M3000 or M3500 headset, then you also need to move the wheel up, then press the answer button and lower the volume knob. Until the green and red LED indicators of the headset are blinking, do not change anything in the headset settings.
Phone setup
After setting the headset to search mode, you need to set up the phone. To do this, select "Search for Bluetooth headsets" in its menu. When the phone and the headset find each other, you need to specify the headset model in the mobile phone menu. In this example, this would be “M2500 by Plantronics” or “M3000 / 3500 by Plantronics”. The procedure for setting up some specific models phones is described below.
When the phone asks for a password, dial "0000". The headset is now set up and paired with your phone. If, after several attempts to set up your headset, you are unable to connect it to your phone, contact Plantronics support. Now let's take a closer look at how to set up a bluetooth headset on individual phones.
Siemens S55
Press the key under the word Menu that appears on the screen. Then move the cursor to "Setup" and press the "Select" button. Switching with the buttons "down" and "up" of the joystick, select the item "Connectivity", in it open the sub-item "Bluetooth", select "Options" and then "Activate".
Next, in the "Options" menu, select "Search for" and click "Access". This will bring up Bluetooth devices on the screen. Choose M2500 (3000/3500) Plantronics from them and press "Select". The phone will now ask you for a password. You need to enter, as already mentioned, "0000" and click Ok.
Nokia 6310
Go to the phone menu and select Bluetooth there. Select the "On" position and press "Select". The phone will then see your headset if it is in search mode. Select it (M2500 (3000/3500) Plantronics) and press "Select". Then you will be asked to enter a password ("0000").
Ericsson T39
After switching on the phone, visit the "Extras" menu and click "Yes". Now look for the "Bluetooth" section, select the "Operation Mode" item in it and set it to the "On" position.
To search for nearby Bluetooth headsets, go to "Paired Devices". Select the "Add Device" - "Phone Initiates" -> "Headset" option in it. Then, in the list of devices that appear, select your headset, enter the password "0000" and click "Yes".
How to connect a headset to your computer
Before setting up the headset on a computer, you need to connect the Bluetooth adapter to the USB port and install the driver on it. Now put the headset in search mode, in the same way as you did when connecting it to the phone and follow these steps.
- On the Bluetooth icon in the tray, you need to right-click and select from context menu See "Bluetooth Setup Wizard".
- From the new list that appears, indicate "I want to find a specific Bluetooth deviсe ..." and click "Next".
- The computer starts searching for nearby Bluetooth devices. It is important that the headset remains in search mode at this point. If suddenly she left this mode, start it again, and on the computer click "Search Again".
- When the headset is found and its name appears on the computer monitor, double-click on it.
- A window will appear asking you to enter a PIN. Enter "0000" and click the "Initiate Paring" button.
- The available services for the headset should now appear on the screen. Put a check mark next to each of them and click the "Finish" button.
- Now, as soon as you press the answer button on the headset, it will connect to your computer as an audio device. Another way to connect it is by right-clicking on the Bluetooth icon in the tray and selecting the "Quick connect" - "Head Set" - "Headset" submenu. By the same actions, the headset is disconnected from the computer.
The headset is connected to the computer. Now, in order to communicate through it in Skype or listen to music through it, you need to set this device as the default in Skype or Windows, respectively.
Bluetooth headset has been in high demand for a long time. However, despite this question, how to connect Bluetooth headset to the phone is still relevant, since not everyone knows how to do it. Of course, there are no particular difficulties in this, but you should still know certain rules.
In addition, the procedure for connecting a headset that has already been paired with another device to the phone is slightly different. This is due to certain features of the technology. To know all this, you should consider how it works. this technology... This will give you a better understanding of how to connect the Bluetooth headset to your phone.
How a wireless headset works
First of all, it should be noted that this device is simply irreplaceable in the modern pace of life, especially for drivers. It bears the name Hands Free, which in translation means - hands free. The advantages of this technology are obvious, since you do not need to hold the mobile phone in your hands during a conversation. In this case, the user gets the opportunity to freely perform any actions. Few people know that you can also listen to music using a wireless headset. We have described in detail how to do this.
Wireless Hands Free works very simply. Any modern telephone equipped with a Bluetooth module. It is through this connection that the transmission of voice data occurs. Therefore, first you need to set up the connection between the headphones and the mobile phone. Bluetooth connection headset to the phone allows the latter to sync with Hands Free, and in the future it will only work with these headphones. That is, other mobile phones will no longer be able to detect your Hands Free. If you have no problems with the connection, but there are problems with use, we advise you to figure it out.
How to connect wireless headphones
So, in order to set up your phone to headphones, first turn on the headset. After that, on the mobile you need to activate the module wireless... After you turn on Bluetooth, the system will automatically search for available devices. It is worth noting that we will cover the pairing procedure for a headset that is being used for the first time.
So, the mobile phone will automatically find available connections and will give you a list (if there are several). You just have to choose the appropriate name and click the "Connect" button. A PIN is required for pairing. As a rule, it is indicated on the box and in the instructions. But, in the overwhelming majority of cases, the key is 0000. After that, enter the connection settings and check the box "Sound during a call". This way, during calls, the sound will be transmitted to the headphones.
On some Hands Free models, before you start searching on your mobile phone, you must set the detection mode. This is done on different models differently. On some devices, you just need to hold down the power button until the indicator turns on (or flashes). Others have a special multi-function wheel that you just need to switch to the appropriate mode. And only after that, carry out further actions. it is described in detail how to choose the right Bluetooth headset, so that in the future there will be no problems.
As you can see, everything is extremely simple. Moreover, instructions are attached to the headphones, in which everything is indicated in detail. But how to set up a bluetooth headset that has already been paired with another device on new phone? Everything is very simple here. You need to re-enable discovery mode, which turns off automatically immediately after synchronization. To do this, press and hold the power button again until the indicator turns on. If the headset is equipped with a multi-function wheel, move it to the appropriate position (up) and press the call (call) button. Then perform pairing as described above.
Instructions forBluetoothheadset
Charger:
The headset has a built-in lithium battery; charge the battery to a full charge before use.
2. Connect Charger to the headset via the charging port.
3. During charging led indicator will work, after the battery is fully charged, the indicator will go out.
Note:
1. A full charge takes about 90 to 120 minutes.
2. When charging for the first time, charge the device for at least 4 hours.
3. Carry out the first 3 charges only after fully discharging the headset until the headset is fully charged.
4. The device will charge at temperatures between -10 and +45 degrees Celsius.
On / Off:
1. Keep the "On" key pressed for about 3 seconds, until the indicator turns on, the device will be turned on.
2. To turn off the device, hold down the "On" key for about 3 seconds; after the indicator flashes 3 times, the device will be turned off.
Making a connection with a mobile phone:
1. Make sure the headset is turned off before starting the connection.
2. Turn on the Bluetooth function on your phone.
3. Keep the "On" key pressed for about 5 seconds; the indicator will flash red and blue alternately (for “Jabra” and “Motorola” headsets the indicator will be on continuously), which means that the device is in pairing mode.
3. Search for new Bluetooth devices on the phone.
4. In the device window mobile phone you will find the inscription "SANYO BL812", "Jabra" or "Motorola".
5. Select the line "SANYO BL812", "Jabra" or "Motorola" and create a connection.
6. Enter the pin code of the connection 1234 for "SANYO BL812 "or 0000 for "Jabra"And" Motorola ", press the "yes" button, the indicator will stop alternately blinking red and blue, and will start blinking blue (for "Jabra" and "Motorola" headsets - the indicator will stop constantly glowing blue and will start blinking blue). This means that the connection was successful.
7. After connecting the headset to the phone, be sure to restart the headset (turn off and after 10 seconds turn on).
8. The headset will now be in standby mode, you can make and receive calls.
Note:
1. If the connection is not created within 90 seconds, the headset will automatically switch to standby mode. However, you cannot use the headset. Repeat steps 1-6 to create the connection.
2. When creating a connection; the recommended distance between the devices is less than 1 m. There should be no metal obstacles between the devices. This headset has a pin code "1234" or "0000". Different mobile phones have different ways settings, refer to the manual for your phone model for instructions.
3. If a connection is created, it will be saved even under the following circumstances:
1) the device will be disconnected
2) one of the devices stopped working
3) one of the devices will be rebooted
How to receive calls:
1. When you receive a call, press the "Talk" key after you hear the call.
How to end a conversation:
1. After ending the conversation, press the Talk key to end the conversation.
2. You can also wait until your interlocutor disconnects, then you disconnect automatically.
Redial the last call:
1. If your phone has the Last Call Redial function, you can use it with a headset.
2. The function is activated by double pressing the "Talk" key.
Volume control:
1. Press the Volume + key to increase the volume.
2. Press the Volume- key to decrease the volume.
Microphone manufacturer NANO phones.
Representative of NANO phones in Nizhny Novgorod.