How to connect any Apple Watch to Wi-Fi. How to quickly and easily connect your Apple Watch to a Wi-Fi network What you need to know when purchasing an Apple Watch

And opportunities. But in order to be able to use all the functions, you will have to connect Apple Watch to iPhone via Bluetooth or Wi-Fi built into the watch. How to do this is described in the article.

Connection via Bluetooth

Most easy way connecting Apple Watch to iPhone - via Bluetooth. This requires that your two devices (Apple Watch and iPhone) be close to each other. This connection option will not take even a few minutes, so today we are talking about another method.

How to connect Apple Watch to iPhone without Bluetooth via Wi-Fi network

This type of connection will be needed when pairing remotely with your iPhone device. In this case, the Apple Watch will try to catch any available network in order to maintain at least some connection.

To create a connection via a Wi-Fi network, you need to:

so that the device is already connected to this network;
to available network met the conditions for connecting to the Apple Watch network.

Photo: iPhone connected to Wi-Fi and Bluetooth

What is it for? These conditions are important because this type The watch does not support connection to the 5 GHz network, since in most cases these networks require a profile and subscription. If the watch was able to catch and connect to any Wi-Fi networks, will appear on the device screen and in the settings wifi icon.

This problem exists, but it can be solved.

By default, the Apple Watch connects to the iPhone via Bluetooth at a distance of up to 10 meters and should switch to Wi-Fi mode if the smartphone cannot be found. This doesn't always happen.

Important to know: the watch can only connect to a Wi-Fi network at a frequency of 2.4 GHz. They cannot work on 5 GHz networks. Your iPhone must know this network and synchronize access keys with the watch in advance.

My network is only being built Apple routers, so I didn't expect any problems. But - trouble.

The first thing I did was scan all corners of the room with WiFi Explorer and make sure that there was good signal in the 2.4 GHz band (diagram above). But I didn’t want to turn off “pure” 5 GHz at all. I found this solution.

How to make Apple Watch work over Wi-Fi

Turn off your Apple Watch. It is important!
On your iPhone, disconnect from WiFi networks in that location by deleting your passkeys. To do this, go to settings, WiFi, click on the “i” icon to the right of the network name and select “Forget this network.”
Turn off Bluetooth on iPhone.
Connect to your WiFi network again. It is important that the network is present in the 2.4 GHz band. If it has the same name in 5GHz, it’s not scary.
Activate Bluetooth on your phone.
Turn on your Apple Watch. They must be near the iPhone.

Wait until the watch finds your phone and a green connection icon appears on the Preview screen.

Check the connection by sending a search signal from the watch to the iPhone. If everything is fine and they communicate reliably, you can try turning off Bluetooth on your phone again to check Apple connections Watch to WiFi. First, a red connection loss icon will appear, but then, if everything went well and the watch has updated the network information, a green cloud will appear, symbolizing an indirect connection of devices.

If the instructions didn't help, try unpairing your iPhone and Apple Watch and then creating it again. As a last resort, temporarily disable the 5GHz band on your network and restore it after you are sure the watch is connecting to WiFi reliably.

If you have encountered similar problems, write in the comments which “dance” helped you.

A smart watch from the Cupertino factory is a kind of small computer that is always easy to take with you. This modern device can already do a lot, and its resources are constantly expanding. With its help, you can monitor your workout progress, monitor your heart rate and overall health, analyze your sleep and wakefulness patterns, listen to and control music, and a dozen other useful things. And this is not something you will forget when leaving home. So, how does the Apple Watch connect to WiFi?

What Wi-Fi networks do Apple Watch support?

So, the treasured device is already in your pocket, that is, on your hand. All you have to do is link it to your iPhone using wireless network.

The presence of third-generation watches allows you to use them autonomously, that is, without a smartphone. True, for the first activation you still can’t do without a phone.

Apple Watch connects to Wi-Fi only if the iPhone with which it is paired via Bluetooth has previously interacted with this Wi-Fi. That is, if you want to connect the bracelet to a new wireless network, you first need to do this on the partner device. It must be remembered that the watch only works with a network at a frequency of 2.4 GHz (802.11b/g/n), the connection will not function at a frequency of 5 GHz. Also, the gadget will not connect to public networks that require a password or authorization to connect to. Therefore, connect only to known and safe networks.

How to check the connection between Apple Watch and iPhone

There are several ways to determine the connection between the watch and the phone. This can be done through Control Center on your watch or through the Watch app on your phone.

To check on your watch, swipe up from the bottom to open Control Center. Appearance in top corner A red cross or a crossed out phone means there is no connection between gadgets.

Through the “Watch” application on your iPhone you can immediately see whether there is a contact or whether the Apple Watch has not connected. If there is no connection, although it was previously established and functioning, turn Airplane Mode on and off again. After such manipulations, the watch will connect again.

How to connect Apple Watch 3 to WiFi

When you turn on and sync for the first time, Apple Watch 3 retains all the settings from the phone it's paired with. That is, even if there are included on smartphone Wi-Fi, Siri, GPS, then they will also be active on the watch, including login data for wireless networks and other information.

However, in order to use all the communication functions of the device, it is necessary to check the configuration of both the iWatch itself and the iPhone with which further synchronization will occur. The setup procedures are so intuitive that you will then give a master class on how to set up an Apple Watch without instructions. So:

How to disconnect your watch from Wi-Fi

It was mentioned above that the watches of the third series have a built-in GSM module. Therefore, you can either disconnect them from the Wi-Fi network or keep the connection connected. To disconnect a wireless network connection, go to Control Center (by swiping up on the watch display) and tap on the Wi-Fi network icon. It will turn from white to dark, which means that the device is disconnected from all networks with which the connection was established.

After this action, iWatch will not try to connect until 5 a.m. automatic mode with a Wi-Fi network from which they were forcibly disconnected. If you want to connect your Apple Watch to a wireless network before the set time expires, then:

Swipe up to open “Control Center” with this gesture and click the corresponding Wi-Fi network icon there;
change your geolocation - the watch will see new network and will try to connect to it;
reboot your watch.

The third generation iWatch can receive messages and make calls without pairing with a smartphone and when Wi-Fi is turned off. However, when this function will become active in our country is still unknown. We use and enjoy what we have.

After the next Apple Watch Series 3 update, users encountered problems connecting to a Wi-Fi wireless network. After authentication is completed, the connection between devices is terminated. Let's figure out how to connect Apple Watch Series 3 to Wi-Fi.

Algorithm for connecting Apple Watch Series 3 to a wireless network

On your iPhone, go to the menu: “Settings” - “Wi-Fi”.
Tap the "i" icon on the right side of your current Wi-Fi connection.
To reset the saved Wi-Fi settings, click “Forget network”.
Click "Settings" - "Wi-Fi". Disable and enable Wi-Fi on your iPhone by toggling the setting.
Connect your iPhone to a 2.4 GHz Wi-Fi network. If prompted, enter your Wi-Fi credentials.
Once you connect your iPhone to your Apple Watch Series 3, your data syncs.
Test your watch's ability to connect to the network by putting your iPhone in Airplane mode (via Control Center or Settings > Airplane Mode).
On Apple Watch Series 3, swipe to open Control Center.

In the drop-down menu on the Apple Watch Series 3, the wireless network icon should be highlighted in green, indicating that the devices have been successfully paired.

If your Wi-Fi network is 802.11 b/g/n 2.4 GHz, Apple Watch Series 3 will not be able to connect to a 5 GHz network or public networks that require a login to sync with. and password.

Apple Watch Series 3 – last generation smartwatches from the Cupertino tech giant. Unlike Series 2, they are equipped with a stand-alone LTE module that works through the built-in eSIM (not yet supported in Russia), thanks to which they can be used even without a smartphone. But it will still be required to activate the device.

How to turn on Apple Watch Series 2, 3?

To turn it on, press and hold the “long” (not round!) side button until the manufacturer’s logo appears on the display.

If after 10-15 seconds of holding the long side button the screen does not flash and the device does not turn on, make sure that it is sufficiently charged. Connect the “charger” and leave it for 30 minutes. After that, you can try to turn on the device again.

How to set up Apple Watch Series 2, 3?

For initial setup You will also need a smartphone updated to the latest iOS versions, with Bluetooth turned on and an active Internet connection (via mobile network or Wi-Fi).

How to do initial setup

To initially set up smart watch, you will need an iPhone with Internet access. How to connect these two devices:

Turn them on;
Bring your watch to your iPhone. Wait a while until a message appears on the phone screen prompting you to use your smartphone to make settings. Click “Next” there. If it doesn't appear, check Bluetooth - it should be turned on. You can also open the corresponding application and click the “Create a pair” button;
After this, a special animation will appear on the watch screen, and the smartphone will turn on the camera through which it will recognize it. Place the companion device's display in the center of the viewfinder as shown in the tips. If automatic recognition does not occur, click the “Create a pair manually” button. The wizard will demonstrate instructions for pairing devices;
Choose which hand you plan to wear the watch on;
Agree to all terms of use;
Enter your Apple ID password.

How to connect Apple Watch 2, 3 to WiFi?

Upon initial activation, the smartwatch copies the settings profile from the connected smartphone. That is, if Wi-Fi, GPS, Siri, etc. are enabled on the iPhone, they are automatically activated on the companion device. Wireless network passwords will also be transferred along with the rest of your data.

You can enable WiFi on Apple Watch 3, as well as disable it or configure other settings directly in the corresponding window of the initial setup wizard.

What else can you do?

In the Initial Setup Wizard you can also:

Set a login password. It will be activated when this accessory is removed from the hand;
Set up a branded payment service;
Install applications from the AppStore.

During the initial setup process, various usage tips will be shown on the smartphone screen.

Key features of Apple Watch Series 2, 3

Activity analysis of Apple Watch Series 2, 3

The program for tracking physical indicators is called “Activity” and is pre-installed with watchOS software, that is, it is ready to work immediately after initial setup.

Interesting

Instructions on how to enable or disable activity tracking are shown directly in the initial setup wizard on your smartphone. There are also hints in the application itself.

The donut chart interface displays the following metrics:

The number of calories burned during movement (the “Mobility” parameter);
Total duration of movements (parameter “Exercises”);
The number of hours in the current day in each of which you moved for at least 1 minute (the “Warm-up” parameter).

To view detailed information For each parameter, you need to swipe up on the screen with pie charts.

The “Exercise” and “Warm-up” parameters are not configurable. “Mobility” can be changed with a strong tap on any screen - after this, a screen will open with settings for the number of calories that need to be burned to achieve the daily goal.

Reminders about the need to “walk” are configured in the control application on the smartphone, in the “My Watch” - “Activity” tab.

How to measure blood pressure on Apple Watch Series 2, 3?

No way. This model, like the previous ones, is not equipped with a built-in blood pressure monitor and therefore cannot measure blood pressure.

Heart rate measurement on Apple Watch 2, 3

To measure your pulse, you need to launch the “Pulse” program from the application menu. In addition, the device constantly analyzes heart rate when the “Training” mode is active, as well as 3 minutes after its completion.

When you first open the Pulse program, the application will offer to enable notifications about increased heart rate in the absence of physical activity. If necessary, this function can be activated.

Apple Watch Heart Rate Variability

To measure heart rate, photoplethysmography technology is used, i.e. The pulse is analyzed by the degree of light transmission of blood in the vessels under the skin.

As a result, the quality of heart rate measurement may vary depending on how the photocells adhere to the skin, skin color, the user's health status, and other factors. The exact value may differ by several beats per minute from the measured one, either up or down.

Sleep analysis in Apple Watch Series 2, 3

There are no built-in tools for monitoring the quality and phases of sleep in this companion device. Therefore, it is recommended to use a third party for tracking. software, which can be downloaded from the AppStore - such as Sleep++, AutoSleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 2, 3 using third-party software

The operating principle of various third-party software is approximately the same. Required:

Install the desired sleep tracker from the AppStore;
Open the sleep tracker and start tracking mode.

Smart alarm clock for Apple Watch Series 2, 3

To use the watch as a smart alarm clock, you will also need to install third-party software that supports this function. For example, Sleep++ or similar ones from the above list.

How to use Apple Pay on Apple Watch 2, 3?

In order for the proprietary payment service to work, you will need to set a password code. This is described in the instructions for initial device setup. In addition, right in the same menu you can link the card with which you plan to pay for purchases.

To configure the service, if this item was skipped in the initial setup menu, you will need:

Open the Watch application on your smartphone;
Open the “My Watch” tab;
Open the “Wallet and Apple Pay»;
If you don't have a passcode set on your watch, the app will prompt you to set it right now. Do it;
Click "Add card";
Select a card from among those already linked - or enter the details of a new one;
Enter security code cards;
Click “Next” and wait for information from the issuing bank;
Click Next.

That's it, the branded payment service will work.

To pay in a store, you will need to quickly press the side button on the watch twice and then bring it face down to the terminal. When activated they will vibrate slightly.

Need to know

If the transaction size exceeds 1000 rubles, you will have to enter the PIN code of the linked card at the terminal to pay.

Unlock Mac with Apple Watch

The watch can only unlock Mac computers and laptops that run macOS High Sierra and support wireless connection via Bluetooth. In addition, all company devices must be associated with one account. To set up unlocking you need to do the following:

On a computer or laptop, open the “Settings” application, select “Protection and Security”, then “General”;
Check the box next to “Unlock Mac with Watch”;
Enter password account;
Confirm.

All. Now the computer will unlock automatically.

How to charge Apple Watch Series 2, 3?

To charge, you must use the included wireless charger. It is enough to connect it to the network and place the back of the watch on its active surface. The charger is equipped with special magnets that automatically align it.

You can also use AirPower wireless charging.

How to Charge Apple Watch Outside the Home

You can use more than just a household network for charging. The power cable can also be connected to USB ports computer, laptop, external battery (“power bank”) or any similar charger.

How to update Apple Watch 2, 3?

Software updates (watchOS) are performed via a linked iPhone smartphone. Instructions:

Set the watch to charge. You cannot remove it from charging until the update is complete;
Make sure they are more than 50% charged;
Open the Watch application on your smartphone, in it - the “My Watch” tab;
Select “Basic”, then “Software Update”;
Download the update. If necessary, you will need to enter a password for your account;
The update will be installed automatically;
The update may take time to install. Wait for it to finish. The corresponding indicator will report this.

You can remove the watch from charging only after the update is complete.

Can Apple Watch be connected to Android?

No you can not. Apple Watch does not work with Android phones. Does not exist third party application, which would simulate the corresponding software for iOS.

However, the user community is looking for another way to connect these two devices. But for now, the answer to the question “Does Apple Watch work with Android” is no, it doesn’t.

Express guide to Apple Watch Series 2, 3

How to check Apple Watch 2, 3 for authenticity

First, make sure it's a Watch and not an iWatch or something like that.

How to check Apple Watch upon purchase:

Carry out a visual inspection. Make sure that the case is free of any connectors, including slots for SIM cards or memory cards, charging connectors, etc.;
Turn on your device. Make sure it actually turns on;
Try connecting to your smartphone. If during the initial setup the device prompted you to enter your account information, you can enter it. The main thing is that there is no “Activate Watch” screen.

How to turn off GPS on Apple Watch 3

GPS does not turn off. You can turn it off on your phone, then the number of geolocation requests will decrease slightly.

Apple Watch Series 2, 3 is not charging - what to do?

If your Apple Watch won't charge, you can try the following:

Make sure the power supply is plugged into an outlet and that there is current. Try a different outlet;
Make sure the wireless charger is in contact with the watch and the magnets are aligned. Try reconnecting. Try turning the charger over;
Make sure that the chargers (including the wireless module, cable and power supply) are original and included in the package;
The charger must not have any shipping film on either side;
The charger and watch must be clean;
Try to force reboot your watch. Press and hold the round and side buttons for 10 seconds. After rebooting, put it on charge again;
Try a different cable, a different power supply, a different wireless charger.

If they still do not charge, take them to a service center.

How to reset Apple Watch to factory settings

The easiest way to reset is to remotely delete all personal data via iCloud:

On your computer, open icloud.com;
Log in to your account;
Select “Find iPhone”;
Select your watch from the available devices;
Click "Erase" and then select "Next" until the process is completed;
Also click the “Delete” button (icon with a cross) next to the name of the watch.

Through the application it is a little more difficult. More details about this will be written later in this manual in Russian (in the section “How to break up a couple”).

In order to reset the watch (to perform the so-called “Apple Watch Restore”), the iPhone associated with it must be connected to the Internet via mobile communications or Wi-Fi.

How to charge Apple Watch without original charger

The third generation companion device (Apple Watch series 3) has limited support for the standard wireless charging Qi, so may be compatible with some chargers. Try placing the back of it against the active charger with Qi support for a few seconds. If charging works, this device can be used.

How to unpair Apple Watch 2, 3

Before you can sell your watch, you will need to remove your own credentials from it. How to unlink Apple Watch from Apple ID:

Open the control application on your phone;
Open the “My Watch” tab;
Open the “Information” menu (indicated by the i symbol in the circle next to the name of the watch);
Select “Break pair”;
If used tariff plan, click “Delete tariff”;
Enter your account password;
Confirm your desire to break up the couple.

Unlinking also resets to factory settings.

Notifications do not arrive on Apple Watch Series 2, 3

This may be due to the following:

The smartphone to which the smartwatch is connected is currently in use. Then notifications are displayed on it;
The watch has a screen lock or Do Not Disturb mode active. Unlock or disable this mode through Control Center;
The watch is disconnected from the phone. This is indicated in the Control Center with a special icon. Turn on phone Wi-Fi and Bluetooth, and on the watch - first activate Airplane mode and then turn it off.

How to unlock Apple Watch 2, 3

To unlock your watch, tap the screen or briefly press any button, and then enter the passcode you set earlier.