For the convenience of watching television on multiple screens, users purchase a universal control device. However, most people face the problem of setting it up. How to set up a universal remote control for your TV? Debugging the device will not take much time, but will allow you to conveniently and easily watch several TVs at the same time
What is a universal remote control
Universal remote remote control(UPDU) is a small, simple-looking device. Contains a microcircuit inside that allows you to generate signals of different pulses simultaneously.
There are quite a lot of UPDU models on the market, which differ in configurations, prices, appearance and control codes. The most popular models are Supra, Huayu, Beeline.
The algorithm for connecting the PU to Smart TV and set-top boxes of older models is no different. No need to look for how to set up a universal remote control for a Samsung TV, or find out service centers, how to set up a universal remote control for an LG TV, since the process of adapting the remote control to the equipment does not depend in any way on the manufacturer of the receiver.
How to set up a universal remote control
Each of the UDPU models has its own pairing algorithm, which is indicated in the operating instructions. Below we will discuss algorithms for connecting remote control systems from popular manufacturing companies.
Supra
This device - popular model for adjustment Samsung TVs, LG, Philips and other models of TV signal receivers. The installation algorithm for Smart TV and older models is the same.
Automatic setup
Adjust the device remote control quickly and conveniently. The process of automatic debugging of the UDPU with the receiver is as follows:
- Connect the screen to the network.
- The remote control needs to be pointed at the TV.
- Press the “POWER” button for 6 seconds until the indicator on the UDPU lights up.
- When pairing is successful, the volume icon will appear on the screen. Press the POWER button once.
- The UDPU is ready for use; you need to check its functionality.
Manual adjustment
If the described method of adjusting the Supra did not help, and you still cannot control the television through the remote control, there is also a manual adjustment universal remote control for TV:
- Select the code corresponding to the model of the TV signal receiver.
- We connect the TV to the network.
- We point the remote control directly at the screen.
- Press “POWER” and enter the code found earlier.
- Do not release “POWER” until the indicator flashes twice.
- We try to check each of the buttons on the remote control. If some of them do not work, then you will need to find another code.
HUAYU
This remote control can be paired with any TV, be it an old Philips or the latest model Samsung. The process of pairing with the screen is the same:
- We press the “POWER” and “SET” buttons on HUAYU, which enters the UDPU into programming mode. When the equipment is paired, the indicator on the remote control device will be constantly lit.
- The command is set by the “VOL” button.
- You can exit the setup mode with the “SET” button.
Remote control devices from this manufacturer are suitable for controlling LCD and LED TVs. This scheme is suitable for setting up remote controls from Unimak, which are also quite common among remote control buyers.
Beeline
Early models of remote control devices from this company had many shortcomings, since they could only be connected if the user had a special set-top box. Also, the remote control did not have a “SETUP” button. However, Beeline corrected itself and released an improved version of remote control equipment. The PU decreased in size, but acquired large quantity function buttons.
To pair the Beeline remote control with the signal receiver, you will need to follow the following step-by-step instructions:
- Turn on TV.
- Press the “C” and “SETUP” buttons.
- We are waiting for the initialization to complete.
- When the indicator blinks twice, the buttons can be released.
- You can check the functionality of the device using the “VOL” button.
Each of the remote controls has its own configuration algorithm, which should be described in detail in the operating instructions included in the kit.
How to set up a universal remote control for your TV? Before you buy a universal remote control, the seller must explain to you how to configure the remote control for your TV model. If you didn’t do this, or you purchased the remote control in an online store, or simply forgot how to configure it, then this article is what you need. I declare immediately: there are countless remote controls, differing from each other in different modifications and configurations. On this moment There are many different ways remote control settings.
Method 1: If the remote control buttons have the following inscriptions: Sony, LG, Daewoo, Samsung and the like, and if the name of your TV is written on the universal remote control button, then you can try to configure the TV “quickly” " To achieve the desired result, you need to turn on the TV for which you will configure the remote control. The next step is to point the remote control at the TV and press the remote control key corresponding to your TV and keep the key pressed for a couple of minutes until something happens. For example: turning off the TV. As soon as this happens, you immediately let go. If you notice a change in volume on the screen, also release the key - the TV will automatically tune in.
Method 2: When purchasing a remote control, a small book or a sheet of paper with explanations must be present in the box. This book describes how to configure the remote control. Here's how: the values written in the book are codes for setting up the remote control. Typically, a universal remote control has a small indicator light that informs you about the status of the remote control. If you are ready to start setting up the remote control, then open the book with codes and look for the codes you need, for example: from the entire list of TVs, find yours. Next, as soon as you have found the code for your TV, turn on the TV, point the universal remote control and press the “SET” key and the TV key (on/off) at the same time, the light should light up, then dial the code for your TV on the remote control, the light should go out . The remote control is all set up.
Manual method identification: The 10 in 1 universal remote control is initially set to the code “000”. If this code matches your TV, for example, then no setup will be required. Click the button corresponding to the device. Please keep in mind that if you want to use a universal 10 in 1 remote control to control 2 different TVs, then you can set one TV to the TV channel, and the other to TV2. Try turning off the TV.
NOTE: If your universal remote control does not have a button labeled “SET”, then your remote control is probably functional and is configured for TV, DVD player, satellite dish and the like. In this situation, you must immediately press another key instead of the “SET” key. For example, if you are setting up a remote control for a TV, then at the same time press the “TV” key and the TV (on/off) key, then the light indicator should light up and you enter the code as described in the 2nd method for setting up a multi-purpose remote control
If you lose your TV remote, you don’t have to worry about it. There are always universal remote controls on sale that, after a fairly simple procedure, can easily replace the original model. The process of connecting to the TV will take no more than 10-15 seconds. It is only important to know how to set up a universal remote control.
Device structure
The design of the universal remote control is no different from the original models. Both types of devices have buttons for selecting channels, adjusting sound, setting a timer, and others.
Typically, both devices run on the same AA or AAA batteries. If you use one remote control for a large number of devices, then the batteries will have to be changed more often than in a conventional model.
Some features of the internal device may determine which devices can be controlled and how to configure the universal remote control. Gal LM p001, for example, has the ability to quickly connect to TV and SAT. Some other models do not have this feature.
Comparison of the original remote control with the universal one
There is no external difference between the two types of control devices. They differ only in the set of functions.
The first and main difference is that universal remote controls can be connected to a large number instruments and devices. They can be used simultaneously. For example, using one universal remote control you can turn on a TV, air conditioner, stereo system and any other electrical unit that allows remote control. The remote control will also allow you to control functions home theater, satellite dish and cable TV.
In addition, the cost of a universal remote control is lower than the original model, and the service life is usually longer.
For owners of older TV models, this universal device will be a lifesaver if the original controller is lost. Original remote controls for previous years' models are simply not produced.
Are they really universal?
Any remote control can be used with different models TVs, players and air conditioners. Of course, there are exceptions. For example, what should you do if you can’t set up a universal remote control? How can I check if it fits a given device model? First, you need to look at the list of compatible models in the instructions for the remote control itself. If there are no instructions regarding this, and the connection cannot be established, the problem may be in both the remote control and the TV.
The versatility of remote controls is determined by the fact that, unlike original devices, which can be configured to work with only one device, they can simultaneously work with different devices from various manufacturers. At the same time, they do not have to be reconfigured every time.
How to set up a universal remote control
To establish a connection between your TV or other device and the universal remote control, you need to follow these steps:
- Turn on the remote control and point it towards the device.
- Simultaneously press the OK or SET button (depending on the remote control model) and hold for 3-5 seconds.
- Enter the code corresponding to your device model.
- Then press the TV button to make sure it is connected.
If for some reason the remote control does not connect to the TV, you need to do these steps again. The device code may have been entered incorrectly.
There is another way to configure the Huayu universal remote control. To connect such a device, you can use auto search:
- Turn on the device you want to configure.
- Press the SET button and then POWER.
- Release the buttons simultaneously.
- Press the POWER button again and release.
- Check if the sound volume indication appears on the screen.
- Press the SET button twice in a row.
Not all universal remote control models support the automatic search function. It is also possible that the auto search function is not supported by the TV model itself. Therefore, for some cases, there is only one way to configure the LM P001 universal remote control - manually.
Some brands differ in function quick search. To connect in this way, you need to perform the following algorithm:
- Turn on the device you want to connect to.
- Press and hold the TV button for a while.
- Release the button when the power indicator lights up.
- Press and hold the MUTE button.
- When the connection occurs, release the button.
- It's easy to check the operation of the remote control - just change the channel or adjust the sound.
If none of the methods worked and the code specified in the instructions did not work, you can use the last method - sequentially searching through the code manually.
How to determine the TV code
Each device model has its own universal code, which allows you to connect a remote control to it. It comes in three, four and five characters.
For example, to find out how to set up a universal remote control for Samsung, you need to look at the code information in the instructions for your TV or air conditioner.
It is important to remember that you need to enter the code of the device being connected, and not the universal remote control.
Smartphones with universal remote control function
Some newer brands of phones allow you to use them as a universal remote control. As a rule, they can only be connected to TVs with the SMART TV function.
To set up a universal remote control on your smartphone, you will need to download special application and follow the installation instructions that light up on the screen. Using the program, you can interact not only with the TV, but also with other devices that allow remote control functions.
This useful feature Available for a limited number of smartphones and TV models. To use your phone as a remote control, both devices must have a Wi-Fi module, an infrared port, or Bluetooth connectivity.
Instructions
Select a universal remote control model, purchase the device and prepare it for use. Select batteries of the right size; as a rule, no more than two AAA types are needed. Remove the battery compartment cover, observing the correct polarity, and insert the batteries into the remote control. Close the power compartment and take the instructions. Carefully read the operating instructions for the device; it should contain codes for different manufacturers of household appliances. Find the values needed for your instance. As a rule, there are several such codes. Select the ones you need and enter them in accordance with the manufacturer's recommendations. If necessary, for example, if you cannot understand some specific terms, study on forums on the Internet. There are many sites that describe what settings need to be made and users can ask questions in discussions and get answers to them.
A universal remote control works in the same way as a remote control for a specific technical device, regardless of whether it is a kettle with remote access. The device is a small box equipped with buttons or a display, contact LEDs and electronic circuit. By pressing the “Start” button, the infrared transmitter sends a certain “Code” to the same receiver of another device and, accordingly, carries out the command you need - adjusts the volume, tunes or switches a specific channel.
After you have entered the required code on the remote control, simultaneously press the SET and TV keys (sometimes instead of TV they write DVB on the device). If the code is correct, the indicator on the POWER key will light up. This is an indication that the device is functioning and ready to be controlled. The remote control does not perform the functions declared by the manufacturer? Try entering a different code value and try using it again. IN in this case will help you automatic search. Turn on the equipment you want to control using the universal remote control. Press the SET and TV keys simultaneously for a few seconds until the POWER key indicator starts flashing. The color of the signal depends on the model of the universal remote control, but most often it is red.
Point the remote control at the device. If your universal remote responds, quickly press any key except SET. If you haven't done this yet, restart the automatic search or go to manual settings. With these manipulations you will install the signal very quickly.
Try setting up the universal switch control using manual search. For example, turn on the TV, tune in to the desired channel. Press the SET and TV keys simultaneously until the POWER key indicator lights up. After this, alternately press this button until the TV begins to respond to the remote control signal. Pauses between presses should be no more than 2 seconds. To end the search, press the SET or TV key.
Check the functionality of the setup. Try using the remote control to adjust the sound, switch channels, turn off the device. If all operations are carried out, the installation and operation of the remote control are carried out correctly.
In a similar way, you can configure the universal remote control to work with other devices. Instead of the TV button, press and hold the button corresponding to the device you are setting up until you begin. For example, DVD for a DVD player, SAT for a satellite receiver, etc.
Depending on the manufacturer, the instructions for your universal remote will give different recommendations for using setting codes. For example, in the English version the codes are located in the Brand section. In the domestic one, the developers have allocated a separate chapter on