How to work with the hdd program. Hdd Regenerator program - program features, how to use it and what is its main advantage

Among all possible ways data storage, despite their great variety, the hard disk does not lose its popularity today. Not everyone dares to upload important information to the cloud, no matter how tempting the terms of using the service may seem, external media are also not always suitable for certain tasks, many users prefer to store personal information on internal drives due to the reliability of devices. At the same time, the HDD is also prone to malfunctions, which in many cases provokes malfunctions. operating system installed on the disk, or no access to user data. Neither one nor the other options are acceptable, so the issue requires an immediate solution. In the event of a complete failure of the hard drive, everything is easier, it will need to be replaced, but most often users are faced with the problem of bad sectors, which are not readable. To diagnose and restore the hard drive, specialized software is used. One of the most successful software solutions – HDD Regenerator.

Setting up and working with the HDD Regenerator program.

The HDD Regenerator application is a simple and effective tool for recovering bad sectors and the surface of a magnetic hard disk. The software uses a special surface magnetization reversal algorithm, while the structure of the data recorded on the disk remains the same. Winchester or Hard Disk Drive being mechanical device, consisting of several round plates, an electric drive and a head for reading / writing information, wears out over time. Disks made of magnetic material on which information is applied rotate at high speed during HDD operation, and the head moves over their surface, performing data processing. In the event that some sections have lost their properties, writing to them becomes impossible, and reading of previously recorded files is not carried out.

The HDD Regenerator program can detect damaged areas on the disk and repair. When uncorrectable sector errors are detected, the task is to reassign the address of the failed memory cell (one of the reserved values is assigned). Thus, writing will not be carried out on bad sectors, which will slightly reduce the size of the hard disk, but also reduce the likelihood of errors. During a deep scan, the software detects and fixes problems with the surface, with the help of HDD Regenerator, a complete regeneration of the surface is performed using the magnetization reversal algorithm. You can also use the application to diagnose digital media (USB flash drives, memory cards, SSDs, etc.).

Main functions of the program

The software differs in that scanning is performed at the physical level, which ensures interaction with unrecognized, unformatted HDDs and all popular file systems. The media to be recovered retains all existing data. After installing the software, it is possible to create a bootable CD / DVD or flash drive, in order to use it if the operating system cannot be loaded. The developer improves the functionality of the product with each update, latest version HDD Regenerator 2018 offers comprehensive hard drive diagnostics and recovery. The main features of the program are:

Low-level access for diagnosing the physical surface of the HDD.
Detection and treatment bad sectors, checking for errors and correcting them automatically.
Identification of physical damage to the surface of the HDD, elimination of detected problems, regeneration by the remagnetization method.
Possibility to pause the recovery process if necessary.
Real-time monitoring of the hard disk status, notification of changes.
The S.M.A.R.T function allows you to evaluate the current HDD status, operating time, etc.
Displaying information about the HDD (general characteristics, temperature, devices, degree of fragmentation and other data).
Detailed statistics of performed procedures.
Create bootable media for use in situations where, due to problems with the HDD, it is impossible to boot the system. When starting from the drive, the program starts and operates in DOS mode.
Ability to work in a Windows environment, regardless of the OS version (starting with XP).

It is easy to use the program of any version, whether it is HDD Regenerator 2011, 2016-2017 or 2018. You can download the software in a shareware version, but activation is required to use all the features. In the presence of license key HDD Regenerator the user will have access to full functionality for an unlimited period. The HDD Regenerator program has a convenient and intuitive interface, not overloaded with numerous submenus and unnecessary elements, the Russian language is supported, the functionality is easy to learn, which allows even an inexperienced user to use the tool.

Installing HDD Regenerator

To take advantage of the software features by running it from a flash drive or in Windows environment, first you need to download the distribution kit and install HDD Regenerator on your computer. The key and crack are in the archive along with the installer. In general, the procedure is similar to installing any other software, so there are no difficulties with this. We perform the following actions:

Download the program and run the installer.
The installation wizard will prepare the application for installation, after which we start the procedure by pressing the “Next” button.
We agree to the terms by marking the desired item, and click "Next".
By default, the program will be installed to the Program Files folder located on system drive, if desired, the installation path can be changed by specifying a different directory. Click "Next" and wait for the procedure to complete.
If you check the box "Launch the program", the program will start when you click the "Finish" button. An application icon will also appear on the desktop.

You can run HDD Regenerator directly from the Windows environment or write to external drive to start from it.

How to use HDD Regenerator

Thanks to clear interface, not burdened with many settings, and convenient system navigation to work with the program is easy even without the crack. There are several options for launching the software: from a shortcut on the desktop, from a USB flash drive or an optical disc. Let's take a closer look at how to properly use the HDD Regenerator program. The interface offers several tabs, when you go to each of them, functions are available that allow you to check and restore the hard drive, as well as burn software to media.

The technology allows you to diagnose the HDD, which should be done before the recovery procedure. It is possible that the hard drive is fully functional and the cause of operating system errors or other software problems not at all in it. To do this, go to the S.M.A.R.T section, the program will analyze the state of the HDD and display information about the health of the hard drive. If you see a status other than “OK” in the status, you will need to perform the recovery procedure.

How to recover a hard drive

In the program window, you will see an offer to scan the hard drive, as well as create boot drives. When it comes to troubleshooting a hard drive, there are a few steps that need to be taken. First you need to close everything active programs except HDD Regenerator and terminate processes. Recovery instructions:

Go to the “Regeneration” section and select “Start Process under Windows” from the list.
In the next window, you need to select the hard drive so that HDD Regenerator starts the recovery procedure, then click "Start Process".
A window will open with a user interface based on text input from the keyboard and text output of the results. To select the type of scanning and recovery of the disk from the list of available actions, press "2" on the keyboard (Normal scan) and the enter key.
Now press "1" (Scan and repair) and Enter to check and fix the found bad sectors.
In a new window, you need to select the starting sector by pressing "1" and the enter key, after which the scanning process for errors will be launched, the progress of which is displayed in the program window. If errors are found during the check, HDD Regenerator will correct them. The process will take some time. Upon completion of the procedure, the user is provided with reporting information on the work performed (the number of bad sectors, fixed and not subject to recovery).

How to burn a flash drive

The program also offers the option to create a bootable USB stick or disk. To carry out the procedure, we connect the USB flash drive to the USB connector on a computer or laptop and perform the following steps:

In the main window of the HDD Regenerator application, click the "Bootable USB Flash" button.
We select the USB flash drive that should be made bootable (if several USB devices are connected to the device, they will be displayed in a list) and click "OK".
A warning window will appear informing you that all information from the USB drive will be erased, we agree with this by confirming the action with the "OK" button.

At the end of the process, you will have a boot drive where you can copy the program to boot with the possibility of treatment outside the operating system of the computer.

The procedure is similar to the previous one, only to burn a disc, you need to insert a CD / DVD disc into the drive and press the “Bootable CD / DVD” button in the main application window. Next is selected required disk and clicking "OK" starts the process. For application software tools from a bootable drive, be it a USB flash drive or a disk, you need to specify the boot priority from removable media in the BIOS.

Advantages and disadvantages

The HDD Regenerator software solution provides the user with the opportunity to independently deal with the problems that have arisen with the HDD, without resorting to the services of service specialists. Among the advantages of the software:

Intuitive, user-friendly interface and ease of use (even in English version).
Russian language support.
Working in OS Windows any versions since XP and file system independence.
The ability to work both in the Windows environment and outside it (using a boot drive).
Recovery of damaged sectors.
View statistics about recovered hard drive sectors.
Monitor HDD status in real time.
Creating a full-fledged boot device from an optical disc or USB flash drive.
The ability to pause the process of scanning the hard drive, so that later they will return to the procedure.
Security of the recovery procedure for user data.

The disadvantages include the following points:

The full version of the product is paid.
The absence of the Russian interface in the official release.

At the same time, you can also use free version, its functionality is quite enough for basic tasks, and for those who want to use the program with the Russian interface, it will not be difficult to use the crack.

As you can see, there is nothing complicated in working with HDD Regenerator; you don’t need to study the settings in depth. Via this software you can restore the hard drive to working capacity without much effort in just a few clicks, as well as create a bootable drive, which helps a lot in case of force majeure.

23.03.2017

Information storage devices are essential components of modern computer systems. To date, the most widespread among various devices, designed for data storage, received HDD - hard drives magnetic disks. These devices are quite reliable, but, like any other PC component, they are not immune from the sudden appearance of failures and breakdowns. Many software tools have been developed to maintain and restore the hard drive, as well as to prevent the loss of information. Among them, a worthy place is occupied by HDD Regenerator - an effective and popular solution to many problems with hard drive.

Application of HDD Regenerator

HDD Regenerator is a very easy to learn and use application designed to recover bad sectors hard drives and surface regeneration. The developers are especially proud of the special algorithm for reversing the magnetization of the surface, on the basis of which the program works.
The application is notable for its simple interface and control method - there are no complicated settings, multi-level menus and switches, the launch commands are simple and understandable even for a novice user.

In fact, the list of features and benefits of HDD Regenerator is quite wide. We will not delve into listing all the benefits of the application, but move on to the main methods of application that are used by a wide range of users.

So, in most cases, the program is used:

For quick diagnosis hard drive and detection of errors, as well as bad sectors (BAD-block);
For deep scanning and detection of all possible problems with the HDD surface, as well as their elimination in automatic mode;
For complete surface regeneration using a special magnetization reversal algorithm.

In addition to the variety of functions, the developers have included several launch methods in the program - HDD Regenerator works at the physical level, so it does not depend on the type and version of the operating system. Launch and operation are possible in a Windows environment (XP, Vista, 7,8,10 are supported), and when booting from a USB-Flash or CD - in DOS mode. Let's dwell on this in more detail.

Launch Options

Method 1: Windows

Method 2: Bootable flash drive

Starting from a USB drive is justified if the disk being restored is the only one in the system or is badly damaged. In addition, a recovery flash drive can be useful for those who often diagnose hard drive problems on different computers. To create a bootable USB-Flash with HDD Regenerator 2011, do the following:

To use the USB-Flash as a disk recovery tool, the PC must be configured to boot from the USB flash drive. How to do this is described in detail in the article on link .

Method 3: Bootable CD/DVD

In the event that the PC disk used for diagnostics and recovery does not have the ability to boot from a USB drive, it is advisable to use a bootable CD / DVD with the program. We create it by analogy with a flash drive.

Regardless of the chosen method of launching the program, further work with HDD Regenerator 2011 and the performance of most operations do not differ from the user's point of view. The only difference between the methods is that when you start from under windows work happens in the window:

And when booting from a USB flash drive or disk, via the DOS interface:

At this stage, the preparatory procedures can be considered completed, we proceed to direct work with the program.

Use cases

Method 1: Diagnosing and quickly identifying BAD-blocks

Method 2: Full scan and remove identified hard drive issues

Method 3: Regeneration of the disk surface, including "healthy" sectors using the remagnetization algorithm

In conclusion, it is worth noting that restoring the health of hard drives using tools such as HDD Regenerator 2011 is available to a wide range of users and does not require a deep study of the principles of operation of complex electronics. At the same time, one should not forget that carrying out procedures related to the maintenance and software repair of a hard drive requires care and accuracy.

Question from a reader:

"The hard drive has stopped working. There is a suspicion that the reason is bad blocks, because there were symptoms hinting at this before. The problem is that I can’t boot Windows. How to create a bootable USB flash drive with the HDD Regenerator program, if at all possible "Will it work as a live cd?"

Indeed, in some cases, loading the operating system and hard check disk in Windows is not possible. A bootable flash drive comes to the rescue. The regenerating one allows you to perform health tests, fix bad sectors and - if you're lucky - revive the HDD.

Burning a bootable USB flash drive: step by step instructions

Fortunately, in HDD Regenerator you can burn a USB flash drive through the main program window. How to do it:

1. Insert a USB flash drive into the USB port of a working computer or laptop (where it is possible to boot Windows). A flash drive of almost any size will do.

Other ways to burn a flash drive with HDD Regenerator

In addition to a USB flash drive, you can also burn a CD / DVD with the HDD Regenerator program included. (Although, of course, the option with a USB flash drive is more convenient). To do this, use the Bootable CD/DVD command.

In addition to burning a boot disk through the program, you can download a LiveCD called GRUB4DOS. In addition to HDD Regenerator, LiveCD includes other utilities - MHDD,

Disk boot failure, insert system disk and press enter. An inscription that sends legions of goosebumps down your back, each one the size of HDD. According to the law of meanness, this happens when nothing portends trouble. But do not rush to frantically restart the system - this is a game of Russian roulette. It is better to boot from another medium and take up a thorough check. A proven tool - MHDD - will help in this.

Introduction

If SMART shows problems, most often this means one thing: the disk is about to start to crumble, and even unnecessary OS loading can affect. The next thing to understand is the software "bads" or hardware ones on it. If there are not so many hardware ones, then you can still try to bring the disk back to life.

I think you have heard of products like MHDD and Victoria. They are indispensable for low-level hard disk work and will help you accomplish great feats of recovery and diagnostics. About Victoria, now it's time to deal with the second - archaic, but still mega-useful utility.

MHDD is small but powerful free program, which is designed to work with drives at the lowest level (as far as possible). The first version was released by Dmitry Postrigan in 2000. It could scan the surface of an IDE drive in CHS mode. Now MHDD is much more than diagnostics. With MHDD, you can do anything: diagnose drives, read and write arbitrary sectors, manage the SMART system, password system, noise management system, and change the size of the drive.

Despite the fact that work with MHDD is possible through installed Windows, I highly recommend burning the image to a USB flash drive or an external (or second boot) drive and booting bare DOS from there. Believe me, in a hardware issue it is better to exclude as much as possible all the links in the chain that can lead to glitches or computer freezes during operation.

Oh those interfaces

Not every interface can be correctly recognized by the program.

SATA interface. There is a possibility that the disk will not be detected in MHDD. The reason may be the operating mode of the SATA controller (IDE and AHCI) in the BIOS. MHDD, alas, does not support AHCI mode. Need to change BIOS settings. Worst of all, not all motherboards now support this mode. The only way out can be to use a machine with a suitable motherboard or to refuse MHDD.

IDE interface. For this interface typical distribution of devices on the loop - master / slave. By default, MHDD hides all devices in slave mode. There are two ways to fix this. The first is to change the location of the hard drive (switch the jumper to master) and check that the settings in the BIOS match. The second way is to try changing the disk number to 2 or 4 in MHDD. Well, don't forget about configuration file mhdd.cfg , which is located in the CFG folder. AT this case the parameter PRIMARY_ENABLED=TRUE is important.

SCSI interface. The SCSI controller driver may not be detected.

USB interface. It is theoretically possible to connect a disk via USB using an additional driver and program settings. The driver emulates the mode of operation via SCSI. It is also necessary to disable all unnecessary USB drives. The target disk must be connected before MHDD can be loaded. You will need to write in config.sys: device=X:\USBASPI.SYS /w /v , where X:\ is the path to the disk.

So, I take one of the broken disks from the shelf (I usually stick a broken label on them) and now I will try to resurrect it to show you how it works in practice. I had a WDC screw WD7500BPVX-60JC3T0 on my hands with a vinaigrette instead of the system and all the files on it.

Since the situation is so sad, I can format the disk up and down with a clear conscience, which greatly simplifies my task. But first, let's deal with a little theory and recovery plan.

getting ready

Initially, the disk must be initialized by the program, which is quite logical. After that, a surface scan is performed, which gives an understanding of the current state of affairs: MHDD will show the state of the hard surface. Then you will need to format the disk and check again. Usually at this stage, the soft-bads disappear, and only the hard ones remain. Then it will be possible to execute the REMAP procedure in order to reassign the bad blocks to the service area.

The main problem is that the service area is not rubber, and even after all the operations you need to look after the disk. If bad blocks continue to appear, then the disk, no matter how hard you try, is no longer a tenant. But in more successful cases, this method should help. As practice shows, after a remap, a disk can work for a very long time and even outlive its neighbors in the basket. Other times, it dies immediately after the reboot - it's just as lucky, and it's almost impossible to predict the effect.

Don't kill

Ditching a disk is much easier than restoring it. For example, everyone knows (or should know) that disconnecting the cable during operation leads to sad consequences. We also strongly discourage you from thoughtlessly switching flags and executing commands in MHDD. Read the documentation carefully and don't start doing something if you don't fully understand what it can lead to.

Well, you can get down to business! First, create a bootable flash drive. For this I recommend - full instructions and DOS itself is. When the media is ready, all that remains is to throw MHDD into its root, so as not to once again climb directories from command line.

In order for the disk connected to the first channel to be accurately displayed, you need to edit the mhdd.cfg config, which is located in the CFG folder.

PRIMARY_ENABLED=TRUE

As I said, scanning of any device is possible only if it is determined by the ID or EID commands (or by pressing F2).

Scanning

To scan, type SCAN and press ENTER or use F4. A menu will appear from which you can change some of the settings. By default, the start sector is zero (start sector). The end sector is equal to the maximum possible (the end of the disk). All functions destructive to user data (Remap, Erase Delays) are disabled by default.

Let's go through the scan options.

Start LBA- the initial sector for scanning, by default 0, that is, the beginning of the disk.
End LBA- sector of the end of the scan, by default the end of the disk. Sometimes it is more convenient to scan not the entire surface (especially when the disk volume exceeds several terabytes), but only the work area where the OS is located. For example, disk C is 50 GB, then the target area will be 2 * 50 * 1024 * 1024 = 104 857 600th sector. You can calculate it easier: (volume * 2) * 1,000,000, total 100,000,000.
Remap marks the sector as bad in a special service area, after which the disk does not access it.
timeout- delay time for reading a sector, after which the check proceeds to the next sector.
Spindown after scan- stop the hard disk after scanning.
Loop test/repair- to carry out scanning or checking cyclically.
Erase Delays- erase sectors in which read delays are detected.

Press F4 again to start the scan. MHDD scans drives in blocks. For IDE/SATA drives, one block is equal to 255 sectors (130,560 bytes).

Here's how scanning works:

MHDD sends a VERIFY SECTORS command with LBA number (sector number) and sector number as parameters.
The drive raises the BUSY flag.
MHDD starts a timer.
After the drive has executed the command, it omits the BUSY flag.
MHDD calculates the time spent by the drive and displays the corresponding block on the screen. If an error (bad block) is encountered, the program outputs a letter that describes the error.

MHDD repeats steps 1-5 until the end sector. If a scan log is needed, it can always be found in the log/mhdd.log file. During the scan, you can see many rectangles of different colors. So that you are not too scared, I give an excerpt from the help:

The presence of red (>500 ms) blocks on a completely healthy drive is unacceptable. If they are, it is necessary to erase (erase) the entire surface of the disk and, if this does not help, get rid of delays, we can conclude that this drive is no longer reliable enough. Alphabetic blocks like x , S , etc. are not allowed: they indicate the presence of bad blocks on the surface.

The first thing to be done is complete cleaning surfaces with the erase command. If this does not help, then scan with the EraseWaits option enabled. If the bad blocks have not disappeared, you should run scan with the Remap option enabled.

Restoring

If the scan reveals errors, the first thing to do is to copy all the data from the drive (if you need them, of course). In my case it was irrelevant. Then you need to completely clear the surface using the ERASE command, which erases each sector on the drive.

The drive will recalculate the ECC fields for each sector. This helps to get rid of the so-called soft-bad-blocks. If erasing does not help, run a scan with the REMAP option enabled.

If you see that each block contains an error, do not try to erase the drive or scan with the REMAP option enabled. Most likely, the drive's service area is damaged, and this cannot be fixed with standard MHDD commands.

The attentive reader, looking at the pictures of the disk scan, probably whistled and shook his head in dismay. Yes, my disk, while I was writing the article, died completely. The number of hardware bads exceeded all permissible limits, and by the time the last lines of the article were filled, it was already crunching like a Belarus tractor. This is by the way that if the disk starts to crumble, then you cannot trust it, especially if hardware bads appear. Remap can help when the disk has not yet begun to actively crumble, but defects have appeared on the surface. In any case, even if you managed to fix it, use such a disk only for non-critical data and in no case as the main one.

What do the indicators indicate?

BUSY- the drive is busy and does not respond to commands;
WRFT- write error;
DREQ- the drive wants to exchange data with the outside world;
ERR- an error occurred as a result of some operation.

When ERR lights up, look to the right upper part screen: the type of the last error will be displayed there:

AMNF- Address Mark not found- access to a specific sector failed. Most likely means that the sector is corrupted. However, immediately after turning on the drive, just the opposite is true - it indicates the absence of problems and reports the successful completion of internal diagnostics;
T0NF- Track 0 Not Found - zero track not found;
ABRT- Abort, the command is rejected;
IDNF- Sector ID Not found;
UNCR- Uncorrectable Error, an error not corrected by the ECC code. Most likely, in this place there is a logical bad block.

Two more indicators may appear at the top: PWD signals the set hardware password, HPA appears if the drive size has been changed using the HPA command (usually used to hide bad blocks at the end of the disk).

So, let's get down to business. Consider how to use the hdd regenerator 2011 program. First, download and install the program. Before using the program, disable all programs that work with the hard drive. For more comfortable use of the program, you can download and install the crack. It should be accompanied by instructions on how to use hdd regenerator 2011 rus, which will help you install the crack without any problems. We strongly recommend that you strictly follow the instructions, otherwise the uninterrupted operation of the hdd regenerator program is not guaranteed.
After starting the program, a dialog box appears. In order to check and repair the HDD in the system shell, you must click the top button "Click here to repair bad sectors of the disk directly from under Windows (XP/Vista/7)". In the window that appears, select the partitions of the disk that should be restored.

Sometimes the system notifies that the SATA HDD is in ANCI mode. To fix this, we restart the computer through the BIOS and select SATA IDE as the mode. Often this is not possible, and a dialog box constantly pops up during the check. We select the "Cancel" button, a command line console appears with 4 items:

Calculation and regeneration of bad sectors and partitions.
Full disk scan with/without data recovery
Software version.
Information about the work done by the regenerator program.
Select item 2 and Start, the HDD check process has begun.

Note that it is not always hard recovery disc in this way brings excellent results. What to do in this case?
A bootable flash drive will help us.
To work, you need a flash drive with a capacity of at least 1 GB. Having launched the hdd regenerator program, select "Create a bootable USB flash drive" and wait until it is formatted and boot data appears on it. We restart the computer. In this case, you need to go into the BIOS and select the priority for loading the OS through a USB flash drive.
A DOS window appears. It is necessary to select sections for diagnostics and regeneration. After selecting the required one, click Start. The process has begun.
To interrupt the scan, you need to press "Esc", but what results will be unknown. Therefore, it is best to wait for the process to complete.
If the HDD has suffered significant damage, then the hdd regenerator will “slow down” when processing sectors, while the operating time may last for several hours. Then you have only one way out - to buy a new HDD and transfer to it the information that still remains thanks to the hdd regenerator 2011 program.