Like any other smartphone, the iPhone has a feature that automatically rotates the screen when you rotate the device. This function allows you to quickly switch from vertical to horizontal screen orientation and back.
In most cases this is very convenient, but sometimes changing the orientation is undesirable. For such cases, a special function is provided that allows you to enable or disable auto-rotate. In this article we will tell you how to use this feature on iPhone 4,4s, 5, 5s, 5c, 6, 6s, and 7.
By default, auto-rotate is turned on on the iPhone, and when you tilt the device 90 degrees to the side, the screen should automatically rotate in the desired direction. But this iPhone behavior can be changed at any time.
If you use an iPhone with iOS version from 4.0 to 6.0, then you need to press twice. After this, the multitasking panel will appear at the bottom of the screen. This panel needs to be scrolled to the right until a button with a round arrow appears, which is responsible for auto-rotating the screen. Using this button you can easily enable or disable auto-rotate.
If you have an iPhone with a more modern version of iOS, then you need to swipe from the bottom edge of the screen. As a result, the so-called “Control Center” will appear, in which all the main settings and functions of the iPhone are concentrated. At the top of Control Center there will be a row of buttons. In this row there should be a button with a picture of a lock and a round arrow, which is used to enable or disable auto-rotate screen. If the button is red, it means auto-rotate is disabled; if the button is gray, it means auto-rotate is enabled.
It should be noted that in the iPhone settings, in the “General” section, there is a function that changes the logic of the switch on the side of the device (by default, this switch is responsible for turning the sound on and off). Using this function, you can set the switch to “Orientation Lock”.
If the switch is in Orientation Lock mode, you will not be able to enable or disable auto-rotation through Control Center. In this case, you need to control auto-rotate using a switch.
In addition, auto-rotate the screen may not work on the iPhone desktop (on the so-called SpringBoard). If auto-rotate works for you in applications, but does not work on the iPhone desktop, then most likely the problem is in the increased scale of icon display. To fix this. You need to go to the “Settings – Screen and brightness – View” section and select the standard interface display (without enlargement).
So, you have become the happy owner of a brand new product from a famous Apple company. How to turn on iPhone and how to start using it? iPhones of all generations are turned on as standard - using the Power button located at the top right of the phone. The same button is responsible for locking and unlocking the phone.
But even after turning it on, it is most often impossible to use the iPhone. In order for the device to begin fully functioning, it must be activated. If you bought a phone from one of the major mobile operators such as MTS or Megafon, then it will most likely already be activated. But if not, then you can do this operation without problems.
Let's take a step-by-step look at how to turn on your iPhone and activate your new phone.
1. Take your iPhone and PC cable out of the box.
2. Download and install a special software on your computer iTunes program.
3. Insert the SIM card into the phone, turn it on using the Power button, connect the phone to the computer via the cable that was included.
4. Most often, iTunes starts automatically. If not, run the program manually. She herself will offer to activate the device. We confirm the request.
5. Leave the iPhone alone and wait for activation to occur. While there is no activation, the device displays a waiting message. While the process is going on, you can get acquainted with the capabilities of the device that do not require communication, for example, with the camera, importing photos, menus, etc.
6. When activation is complete, try calling. If everything is in order, the phone will dial the number. This means that the full functionality of your iPhone is enabled.
How to turn on iPhone 4s
For this generation of iPhones, the activation process was significantly simplified - using a computer was no longer necessary.
How to turn on iPhone without using iTunes.
1. Insert the SIM card, turn on the phone using the “Power” button.
2. Choose a familiar interface language: Russian-Russia
3. The phone asks whether you will allow it to determine your location or not (this will be needed later to use maps, check-ins on Facebook, etc.). If these functions are needed, then we allow them.
4. Next the iPhone will ask WiFi connection. In principle, this step is optional. It can be done later, at any time. We will still need the Internet to send information to Apple about the successful activation of the device, as well as for the operation of various online services such as iCloud and iTunes Match. For the same purposes, you can successfully use the mobile Internet of a local operator (3G/GPRS).
5. Now the iPhone will register in the mobile operator’s network and receive necessary settings for MMS, SMS. If you previously had a different iPhone, they will offer to restore the previously saved data from backup copy. And if the iPhone is new, then you need to select “Customize new device" In general, after this you can already use the phone fully. Further steps are in principle optional, but highly desirable.
6. Again you need to connect to the Internet and log in using your Apple ID (this is personal account for all Apple services). If you don't have one, you need to create one new account- it's free and easy.
7. An agreement appears that you need to accept (it would be good to read it first), then enable (or not enable) voice assistant.
8. Whether we agree or not that Apple conducts diagnostic reports, click the “Start using” button. That's all, actually.
Don’t forget also that you can activate your iPhone 4s using using iTunes.
How to turn on iPhone if the "On" button does not work
If you hold the power button for a long time, but the phone does not respond, it means that the problem is most likely in the upper cable where the button is located. Then there will be problems with the headphone jack, the volume control buttons, and the switch silent mode.
Perhaps the power button has sunk, reaching the same height as the body. You need to check: maybe the fasteners are cracked or the screws are loose.
In any case, if the button does not work, then the phone must be taken to the service. It is better not to open it yourself.
How to turn on iPhone if it's frozen
To do this you need to use the mode forced reboot: simultaneously press and long hold the “On” button (at the top) and the “Home” button (the only round button below the screen). After this, the phone will turn off. If you turn it back on, it will take longer to reboot than usual, but the problems will automatically be fixed.
How to turn on iPhone 3G
On home page screen you need to click “Settings” - “General” - “Network”. In the next window, swipe the slider. Click the “On” position next to 3G.
When the 3G protocol is used, the information loads faster, but the battery power is also consumed faster.
Setting up the Internet on iPhone (4, 5, 6, 7, 8, X, SE) is a delicate and delicate process. Like any other more or less modern smartphone, iPhone can connect to Wi-Fi, 3G, 4G, and soon 5G. This seems obvious, but what could be so difficult about setting up the Internet?
However, many Apple users who have been using this company's smartphones relatively recently periodically encounter problems incorrect setting, which is why they cannot use this function. In this article, we will tell you how to properly set up the Internet on your iPhone to get the most out of it.
Let's start with setting up mobile Internet on an iPhone, since it is the most common and in demand.
1. First, go to “Settings” → “General” section → “Network” tab.
2.In the section " cellular» Scroll down, find the “Cellular Data Communications” subsection and go into it.
3. Pay attention to the “Cellular Data” block. 3 fields must be filled in here: APN, username, password.
For operators mobile internet, you must enter the following data:
| MTS | Beeline | MEGAFON | |
|---|---|---|---|
| APN | internet.mts.ru | internet.beeline.ru | internet |
| Username | mts | beeline | (do not enter anything) |
| Password | mts | beeline | (do not enter anything) |
| TELE 2 | Yota | Motive | Rostelecom | |
|---|---|---|---|---|
| APN | internet.tele2.ru | internet.yota | inet.ycc.ru | internet.etk.ru |
| Username | (no login) | (no login) | motiv | (no login) |
| Password | (no password) | (no password) | motiv | (no password) |
Internet and MMS settings for iPhone
Internet and MMS settings on iPhone and iPad
Kyivstar mms, internet settings for iPhone 5
Reset APN settings if problems occur
If all the data is entered correctly, but there is no Internet, the best solution would be to reset the APN settings, for their subsequent automatic or manual entry. To return to default APN settings, do the following:
1. Open Settings.
2. Select the “Cellular” section.
4. Select the "Reset settings" function. If you have installed a configuration profile, the profile's default settings will be used instead.
Setting up (turning on and off) Wi-Fi on iPhone X, 8, 7, 6, 5
Next on our list is connecting and Wi-Fi setup networks. Connecting to the network is extremely simple and the only data you will need to enter is the set password (if the network is not open or public).
Here's what you need to connect to Wi-Fi:
1. Tap the Settings icon on the home screen and then tap Wi-Fi.
2. Make sure the Wi-Fi slider is set to the active position, then select the network to connect to. If you have previously connected to a specific network, when you are within range of an access point, your smartphone will automatically connect to the network.
3. Once you select a network, a message will appear asking for a password .
4. Enter your network password.
5. Click the "Join" button.
6. For free, public Wi-Fi networks Passwords are usually not required. However, before connecting to such networks, you should take care of security in order to avoid unpleasant situations with data loss and interception.
If you cannot click "Join", it means that the password you entered is incorrect. Please try again or contact your network administrator for further assistance.
After you have successfully joined the network, next to network name a check mark will appear and the level indicator Wi-Fi signal will appear at the top left of the screen.
Many iPhone owners and iPad have probably encountered the problem of having to spend a lot of time searching the desired program, lost among the huge number installed applications. Convenient organization of application icons will help prevent such situations and make working with iPhone more productive.
In contact with
Remember: you can always use Spotlight to search for apps. Just pull down on top part display to bring up the search bar (or swipe left and tap Search) and enter the name of the program.
As alternative way You can use the voice assistant Siri.
How to return the arrangement of icons to the “factory order”
If the icons are on home screen has become too much, you can return the desktop to its “factory” appearance. This little trick will arrange the applications in the order Apple engineers intended. Open "Settings" → "Basic" → "Reset" → "Reset settings Home".
As a result of this action, your default applications will be displayed on the home screen, and all your downloaded programs and created folders will be located on following pages screen. Although you may not like the default icon layout, this method will help you separate apps and start organizing them on your home screen.
Consistency – best method productive work from iPhone. There are many ways to sort applications, but they will only work if you stick to your own set rules.
Arrange icons by parameters:
In alphabet order. The method of arranging icons in alphabetical order (from A to Z) is quite convenient, but if there are a lot of applications, they can “spread” over several screens. In this case, try creating folders, for example, A to C, D to F, and so on.
By color: If you are used to being guided by color, group icons in the same color scheme according to our example.
By association: Another way out is to arrange the icons similar applications next to each other. For example, place key applications “Mail”, “Messages”, Safari in the center, work tools such as Dropbox, Evernote and OneDrive on another screen, games on the third.
By action: This recommendation applies to folders. Instead of vague terms like “shopping” or “news,” use verbs (“listen,” “read,” or “watch”) in folder titles. Thus, when searching for a program, you just need to open the corresponding application folder.
Use folders
iOS allows you to place folders in the Dock. You can place your favorite applications on the panel, and they will be accessible from any screen. In fact, there is no limit to the number of folders in the Dock, but it is better to limit yourself to two, for example, “Messages” and “Mail”.
If you have a significant number of applications, folders are a necessary evil, but sorting by folders does not always make the task of finding an application easier. In this case, you can use emoji in the folder names, which will not only please the eye, but also allow you to show ingenuity.
How to arrange icons on the iPhone and iPad desktop anywhere on the screen
Create a desktop that suits you
This may seem obvious, but we all use our iPhone differently. Some users do it every day, rarely opening anything else, others download ten games every week, and those who enjoy running or cycling often use apps like Runtastic and Music.
The main screen is designed for the most useful applications, which can be accessed with one tap, and it is better to place all folders on the second “page”. You can view information about the most frequently used applications in the section "Settings" → "Battery". Tap the clock icon to display statistics about the usage time of each application.
The second screen is a great place to put folders because you don't have to do anything to access them. a large number of taps and swipes. If there are few applications, you can completely abandon folders.
Do you spend a lot of time searching for an app that you use all the time? Move its icon closer to the top of the list, and move less-used programs a little further down. Organize apps on your home screen based on their usefulness and frequency of use.
It always seemed to me that there is nothing complicated about Apple gadgets. However, this trend is rapidly disappearing and with each new version There are more and more iOS settings that you need to keep track of. In this article we will talk about what you need to pay attention to when setting up new iPhone or iPad.
Don't update to iCloud Drive
iCloud Drive Only iOS 8 and OS X Yosemite are supported, so if you use iCloud a lot and have a Mac, don't rush to upgrade to iCloud Drive until OS X Yosemite is officially released.
Set up iCloud sync
iCloud allows you to sync a lot of different information. Mail, contacts, photos, files third party applications- all this can be configured and it’s better to actually do it.
Disable keyboard and lock screen sounds
Because they're annoying.
Turn off recurring Messages notifications
For the same reason.
Enable auto-delete messages
Surprisingly, over time, media files in iMessage can take up gigabytes free space. In order not to delete correspondence one by one, you can enable automatic removal old messages.
Set up push notifications
Push notifications in iOS are very amenable detailed settings. You can change the type of notification, enable a sticker on your badge, an alert on the lock screen, and so on. Moreover, you can do this for each individual application.
Add keyboard shortcuts
Despite the fact that more and more third-party keyboards are appearing, there are still many supporters of the standard one iOS keyboards. If you are one of them, then take the time to set up your keyboard shortcuts. With their help, you can write entire phrases with several characters. They will save you a lot of time later.
Increase the number of lines in the mail preview
The standard number of lines in a preview is 2. Their number can be increased to 5. Thus, you can understand what the message is about without even going into it and immediately send it to the archive or to a specific list.
Activate "Hey Siri"
Despite the fact that Siri is still a rather useless thing in our area, with its help you can already find out the name of the song playing, the weather, set reminders, and so on. With the phrase “Hey Siri” you can launch Siri without even touching the gadget. You can do this in Settings → Siri.
iOS 8 has brought a huge number of opportunities for developers, and as a result, a lot of goodies for us! Widgets, extensions, app interactions and more. For applications updated for iOS 8 in App Store There is a separate tab that definitely needs to be viewed.