Quite often, when working with text in a program Microsoft Word, there is a need to rotate the sheet horizontally. And how to rotate a sheet in Word? Let's figure it out.
In Microsoft Word, there are two types of sheet layout - vertical and horizontal. The vertical arrangement of the sheet is called a book spread, the horizontal one is called landscape.
The default page orientation in Word is portrait. However, when you are working with charts for example, or when you are creating something like a leaflet, you may need to rotate the sheet 90 degrees, i.e. switch to landscape sheet.
Luckily, Word makes it easy to switch to landscape mode.
If you are using Word 2003, then select the menu item File -> Page settings.
Then in the dialog box Page settings select tab Fields.
Under the heading Orientation click Landscape. A blue outline should appear inside the edge of the window with a picture of a leaf in a horizontal position.
If you want all sheets in your document to be in landscape orientation, then simply click the OK button at the bottom of the dialog box. If you want to apply changes only from the current sheet and to all the following, then select the option until the end of the document Apply In chapter Sample, and then click OK.
In addition, you can make any pages in the middle of the document landscape. Simply highlight the pages you need before opening the " Page settings" And then, following the instructions described above, select the option to selected text in the drop-down list called Apply.
Landscape sheet in Word 2007, 2010
In newer versions Word programs(2007, 2010) changing the orientation of the sheet is even easier. Go to the tab Page layout main menu, in the command group Page settings select Orientation -> Landscape. All pages of the document will change orientation.
If you need to rotate only one or several selected pages, click on the button in the lower right corner of the command group Page settings.
Hello everyone. Sometimes there is a need to create a document in Microsoft Word, where all the pages are vertical, and another page (or several) are horizontal. For example, it might look like this:
Everything looks so simple. It seems that all you have to do is select the page you want and change its position to landscape. But if you do this, you will see that not just one page will become horizontal, but the whole page.
Therefore, I will tell you how to change orientation in a few simple steps only one page (and you may have several), and leave the others in a vertical position.
Process
Let's get started:
The last action will cause all subsequent pages to be expanded horizontally. But what can be done so that only required pages? And to do this, you need to repeat the same steps, only in step 4 select Portrait orientation.
Advice: You can repeat these steps as many times as necessary, combining horizontal and vertical sheets throughout the document.
Attention! Step 2 is very important. When you select the next page, you create a section break in the text, allowing you to change the position of pages only in that section. If you add new page by choosing Insert - Blank Page or Insert - Page Break, then Word will insert the page but not insert a section break, causing all the pages to be flipped in step 4 instead of just one.
Video
Conclusion
That's all. Now you know how you can turn a page in any direction and arrange vertical and horizontal page in Word. If you have any questions, write them in the comments.
People are accustomed to completing all office and work documents using Microsoft program Word. Beginner users often wonder how to flip a sheet horizontally in Word. By default, the program produces vertical, or book, pages - long but narrow. Find out how to turn a page in different versions of Word.
How to make a landscape page in Word for the entire document
To print a wide table, chart, or insert an image, it is best to use a horizontal page view. For plain text standard will do book format. To change the paper orientation, you do not need to install additional editors or programs, you just need to follow the steps and steps from the instructions below. It is important to remember that when using different versions program, it is worth turning to different sequences and algorithms. Learn step by step how to create landscape orientation in Word.
In Word 2003
The oldest, but still no less popular version of the text editor does not differ in functionality from the newest ones. Additional options, new fonts and beautiful design added every year, but the base remains unchanged. The position of the document is one of the main criteria of the editor. How to make a landscape sheet in Word 2003? Making these changes is easy and simple; you just need to remember the algorithm once:
- Open the File tab. To find it, look to the left top corner.
- In the menu that opens, find and click “Page Options”.
- On the “Page Orientation” line, select the icon depicting the desired orientation.
- Using the same menu, you can return the classic page position.
For Word 2007
The algorithm is simple:
- Since you can make a landscape sheet in Word only using the menu, you need to expand the “Page Layout” column in the top menu bar.
- The word “Orientation” will be located on the bottom line; it should be the leftmost one. You have to click on it.
- Two items will open: “Portrait” and “Landscape”. Once selected, you can change the layout of the pages of the entire document.
In Word 2010
The new and latest versions of the Word program are not very different from the seven: the design has changed a little, the color scheme has changed, but the functionality meets the highest requirements. Changing the position of the sheet using the tenth year version is as simple as in older ones. To do this you need:
- On the Navigation Panel, select “Page Layout”.
- Among all the functions: theme, color, effects, margins, size, background, border color, line numbers, breaks and others - you need to find “Orientation”. It will be closer to the left edge, but you shouldn't look for it by looking at the corner of the menu.
- After clicking on this button, you should choose from two options that appear: “Portrait” or “Landscape”. The first is vertical, and the second is horizontal. After these simple steps, the document will acquire the desired appearance, and placing the necessary information will become much easier.
How to make one page in Word landscape
If you have figured out how to turn a vertical sheet into a landscape one, all that remains is to learn the last secret, how to delimit each page and give it its own arrangement. You can set a new sheet to have a different orientation than its neighbors. Here are the steps to take:
- We need to make it active. To do this, you just need to place the cursor on this sheet, highlighting any line or word.
- Open the familiar “Page Layout” tab.
- On the expanded window, among all the options, you need to click on the small “expanding” arrow - “Page Options”. It will be in the lower right corner.
- The characteristics window appears. Mark the desired location.
- For the bottom column “Apply” you need to select “until the end of the document”.
- Click "OK".
- After this, all pages, starting with the selected one, will change orientation.
- To make only one sheet horizontal, you must continue to follow these instructions.
- Make the next sheet from the document active. And do all steps two through six, only changing from landscape to portrait, and not vice versa, as you did from the very beginning.
- As a result, only one page stands out from the crowd.
In Microsoft Word, as in many other programs, there are two types of sheet orientation - portrait (set by default) and landscape, which can be set in the settings. Which type of orientation you may need in the first place depends on the job you are doing.
Often, work with documents is carried out in a vertical orientation, but sometimes the sheet needs to be rotated. Below we will talk about how to make a page horizontal in Word.
Note: Changing the page orientation also entails changing the collection of finished pages and covers.
Important: The instructions below apply to all versions of the Microsoft product. Using it, you can make a landscape page in Word 2003, 2007, 2010, 2013. We use as an example latest version — Microsoft Office 2016. The steps described below may differ visually, the names of items and sections of the program may also be slightly different, but their semantic content is identical in all cases.
1. Having opened the document in which you want to change the page orientation, go to the tab "Layout" or "Page layout" in older versions of Word.
2. In the first group ( "Page settings") on the toolbar, find the item "Orientation" and expand it.
3. In a small menu that will appear in front of you, you can select the orientation. Click "Landscape".
4. The page or pages, depending on how many of them you have in the document, will change its orientation from vertical (portrait) to horizontal (landscape).
How to combine landscape and portrait orientation in one document
Sometimes it happens that in one text document It is necessary to arrange both vertical and horizontal pages. Combining the two types of sheet orientation is not as difficult as it might seem.
1. Select the page(s) or paragraph (piece of text) whose orientation you want to change.
Note: If you need to make landscape (or portrait) orientation for part of the text on a portrait (or portrait) page, the selected text section will be located on separate page, and the text that is located next to it (before and/or after) will be placed on the surrounding pages.
2. In masonry "Layout", chapter "Page settings" click on the button "Fields".
3. Select "Custom Fields".
4. In the window that opens, in the tab "Fields" Select the document orientation you require (landscape).
5. Below, at point "Apply" from the drop down menu select "To selected text" and press "OK".
6. As you can see, the two adjacent pages have different orientations - one is horizontal, the other is vertical.
Note: A section break will automatically be added before a piece of text whose orientation you changed. If the document is already divided into sections, you can click anywhere in the required section, or select several, after which you can change the orientation of only the sections you have selected.
That's all, now you know how to flip a sheet horizontally in Word 2007, 2010 or 2016, as well as in any other versions of this product, or, to put it correctly, make landscape orientation instead of portrait or next to it. Now you know a little more, we wish you productive work and effective learning.
We'll take the text editor package as an example. This editor is one of the most popular today. You can immediately note that this one has enormous functionality and each of its functions is not difficult to use. But still, many users experience various questions when working with Microsoft Word documents. Today we will look at another question related to this text editor. The question is: "how in Microsoft document Word makes one page portrait and the other landscape.
A task that seems difficult to some users is actually extremely simple. So, first of all, you need to open the Microsoft Word document itself. After opening, go to the page you need and place the cursor on it. Now in the document toolbar we look for the tab " Page layout"and in it we go to the menu" Page settings".
Here we select landscape page orientation and click on the item " Apply to the end of the document". We confirm our actions by pressing the button " OK".
If you want a portrait view of a document page, you need to select it from the Page Setup menu. But what if you need only one, for example, landscape page for the entire document? As you understand, using the above method, all your subsequent pages will have a landscape view. The way out of this situation is also quite simple.
All you need to do is change the orientation of the document pages after the page you made landscape to portrait. That is, you need to place the mouse cursor on the page from which you will have a portrait page orientation, and perform the steps written above, only selecting the portrait page type. After this, all pages of your document will again take on a book appearance.
If you need to make one page portrait and the other landscape in a Microsoft Word document, then this is quite possible. All you need to do is follow the recommendations given in this article.