official Stock ROM firmware for Meizu Pro 6 is Here, in the article you Will Learn How to Install stock ROM /on Meizu Pro 6. if you own a Meizu Pro 6 smartphone and want to Install Stock Rom/ on it to unbrick or fix bootloop issue then you are on Correct Place, in The article we Explain Step by Step Guide to Install Stock Firmware on Meizu Pro 6 .
The Meizu Pro 6 is a Smartphone Which is Run on android 6.XX OS and Powered by a Processor, the Meizu Pro 6 is a Dual sim Smartphone that accept 2 Regular SIM card, connectivity Option’s include 3G 4G, GPS, Wi Fi, Bluetooth etc, Sensor include Goryo proximity Gravity etc.
Firmware Information-
| Device Name | Meizu Pro 6 |
| OS | Android 6.XX |
| Chipset | Mediatek |
| language | Multi Language |
| Root access | Not Rooted |
| Gapps | Included |
Require tools and Files-
| File Name | Download |
| SP Flash tools | |
| V-COM Driver | |
| Firmware Meizu Pro 6 | Download |
| Mirror | Download |
| Backup NVRAM |
1. Always update the device firmware when the battery charge is sufficient (at least 20%)!
2. It is recommended (not necessary) to update the firmware with the “Clear Data” option checked to avoid software errors during subsequent operation of the smartphone after the update!
Note: “Clear Data” means deleting current settings, phone book entries, messages, notes, mail accounts, as well as installed third-party software. This does not affect data such as music, videos, photos and other files stored in the smartphone’s memory. Please take care to create backup copies of the necessary information in advance.
MAKE A BACKUP COPY OF DATA) can be done from the settings of your MEIZU smartphone. To do this, go to the Settings menu of your smartphone, then About phone - Memory - Backup. Click the big MAKE BACKUP button and select the data you need to save. In order to save your backup to your Computer, find the Backup folder in your smartphone’s File Manager and save its entire contents. More detailed step by step. You can restore the backup in the same Settings section, even on a different MEIZU smartphone model!
3. Downgrading the firmware version (rolling back to an earlier one) MUST be done with data clearing (“Clear Data”).
4. If you received ROOT access on your smartphone before updating, then when updating the firmware, you must check the “Clear data” option. Otherwise, application error messages and other system errors may appear after the update. If you have not opened ROOT access on your smartphone, do not take this point into account.
5. If, as a result of updating the firmware, crashes of programs and other errors are observed, it is recommended to update the firmware again, making sure to check the “Clear Data” option.
6. If, after flashing the firmware, the device reboots cyclically or error messages about individual applications appear (force close), try flashing the smartphone again or resetting the data (check “Clear data” in the flashing window)
INSTRUCTIONS FOR INSTALLING THE UPDATE
IMPORTANT! DURING THE PROCESS OF UPDATING YOUR SMARTPHONE, DO NOT ATTEMPT TO TURN OFF OR RESET THE DEVICE! WAIT FOR THE UPDATE PROCESS TO BE COMPLETE!
A reboot is allowed only after completing the smartphone update process, during the first boot of the device, during “APPLICATION OPTIMIZATION”, if the optimization has been frozen in one place for 5 minutes or more.
LIST OF CHANGES:
Peculiarities:
System:
-Added new application: Themes
-Improved home screen icon layout
-Improved mechanism, thanks to which the priority of notifications is determined more accurately
-Improved display of notifications when battery is low
-Improved the efficiency of changes in Task Manager settings, so that changes immediately take effect
-Optimized text color on the lock screen to ensure readability even on a white background
-Improved accuracy of system time display and optimized automatic calibration logic
-Adjusted the method for launching developer options for safer and more efficient operation. Options have been adjusted: touch processing, -----Smart case, mCharge, calibration of the proximity sensor, as well as the acceleration sensor and gyroscope in accordance with the accessibility settings. (New method to launch Developer Options: Go to Settings > About Phone, then tap Build Number 7 times in a row; Disable method: Go to Settings > Apps > All > Settings, then tap "Clear data")
-Improved system translation
-Improved system stability
-Improved system flexibility
-Improved RTL layout for Hebrew
-Fixed an issue where icons would disappear from the dock on the home screen, but tapping on them would still work
-Fixed untranslated Chinese button displayed when deleting an application from the home screen
Communications:
-Improved contact merging logic to improve accuracy when merging duplicates
Safety:
-Fixed a crash in Manage Permissions > Manage Software Permissions
-Fixed unexpected crash due to simultaneous attempts to change network access permission for multiple applications when too many applications are installed
Downloads:
-Improved download management efficiency so file sorting now takes effect immediately
-Improved relevant logic for downloaded files so that there are no problems when files are automatically opened after downloading is complete
-Fixed a bug where clicking “Cancel” did not delete the file
-Fixed false download notification displayed when there are no downloadable files
Check whether your smartphone is certified in Russia and whether the update is suitable for installation on it, using IMEI1 (Settings - About phone):
Messages about unstable operation of your smartphone with firmware should be left in the BUG REPORTS section of our forum!
How to flash Chinese phone Meizu Pro 7 to global firmware.
After following the instructions, get Meizu Pro 7 with a working fingerprint and global firmware!
The main thing is that when switching from 6.2.0 and later firmware to the global one, the PRINT WILL NOT WORK! The phone must initially have 6.1.3.5A or older.
That is, if you currently have a beta or global without a finger, then you can’t immediately throw 6.1.3.5A into recovery - you’ll get a bootlap.
Now point by point.
Block of work 1. We get 6.1.3.5A on the phone.
If you already have 6.1.3.5A in your phone, go straight to block 2. If you already have 6.2.0.1A, go straight to step 5
1. Download any firmware A, preferably 6.2.0.1A (tested on it) and 6.1.3.5A next.
2. Enter recovery. For this:
-Turn off the phone.
-Press the volume up and power buttons. The screen lights up - release the power button and hold down the volume. 2 menu items will appear on the screen - update and wipe, this is recovery mode
3. We connect the phone in this mode to the computer, a 2 GB flash drive is detected, we throw update.zip from firmware 6.2.0.1A into it. The file should be called exactly like update.zip!!!
4. Disconnect from the computer, click on the wipe checkbox on the phone, then start and just wait.
5. The phone turns on - you can turn it off immediately. We go into recovery again, drop 6.1.3.5A into it, also with the name update.zip, disconnect from the computer, again 2 checkboxes and start.
The result of the first block of work is 6.1.3.5A installed on the phone. If somewhere it asks for a reset password, you don’t have to check the wipe box until you get firmware 6.1.3.5A on your phone.
Block of work 2. Install the global.
1) Download SuperSU 2.79, FlashFire (I checked it on the versions that I attached below, others worked incorrectly). And global.
2) I deleted the boot.img file from the archive of the downloaded global firmware. Otherwise my phone wouldn't start. Or download the firmware directly without boot
3) Turn on the phone on 6.1.3.5A - log into your Meizu account (or register if you don’t have an account). Next are the settings - fingerprint settings, Root rights. Check the box and the phone will reboot.
4) The phone turns on - we dump the downloaded SuperSU, FlashFire and the corrected (without boot.img in the archive) firmware G into the built-in memory into the root of the phone’s memory with the name update.zip
5) Install supersu from the built-in memory, launch it, give root access, click Exprert, update files - in normal mode (NOT CWM/TWRP!!), wait until the files are updated and click OK, do not reboot the phone! Otherwise you will get a bootloop.
6. Install Flashfire. Further:
-Launch Flashfire, click on Agree, then No thanks and provide the root, click on + and select Flash ZIP or OTA, then update.zip in memory, check the Mount /system read/write box.
-Click on + again and select wipe, and check the box for Cache partition (Wipe cache partition) in addition to those already selected and ok. Next, hold down wipe with your finger and drag them to the beginning of the Flashfire list, i.e. so that wipe comes first, and then the archive with the firmware.
The output is global. In the special features settings, uncheck the show navigation bar checkbox and get a working button with a “back” sensor. And a print.
IF THE PHONE DOES NOT BOOT LOAD (BOOTLOOP) AND IS HANGING ON THE MEIZU LEGEND
It's very easy to deal with a bootlap
1. Download any firmware A, preferably 6.2.0.X -
2. Turn off the phone. Then press the volume up and power buttons. The screen lights up - release the power button and hold down the volume.
2 menu items will appear on the screen - update and wipe, this is recovery mode
3. connect the phone in this mode to the computer, a 2 GB flash drive is detected, throw update.zip from the firmware into it.
4. Disconnect from the computer, press start on the phone and just wait.
In the first point, if the version of the phone on the M box also fails, download the M firmware and repeat the same thing.
meizu pro 7 firmware, how to flash meizu pro 7, how to flash meizu pro 7
Flashing Meizu Pro 7 64 Gb to global firmware 2018-03-21T21:54:51+03:00 Komandin Video Device firmwareMeizu Pro 7,meizu pro 7 firmware,pro 7 global,how to flash meizu pro 7,flash meizu pro 7How to flash Chinese phone Meizu Pro 7 to global firmware. After following the instructions, get Meizu Pro 7 with a working fingerprint and global firmware! The main thing is that when switching from 6.2.0 and later firmware to the global one, the PRINT WILL NOT WORK! It is necessary that the phone initially has 6.1.3.5A or older. That is, if...KomandinInstructions for flashing your Meizu Pro 6 phone to new firmware, using the standard recovery menu, changing the Chinese phone ID to global, complete Russification of the Meizu Pro 6 smartphone, getting root
Thanks to the care of the manufacturer, Meizu phones are very difficult to kill when flashing the firmware; the system always first checks the firmware for compatibility and errors. Therefore, you can safely experiment with the firmware of your Meizu Pro 6. If you managed to ruin your smartphone, don’t panic, you will only need to unlock the bootloader. And in order to prevent the state of being bricked, there is no need to try to flash something in fastboot mode. But if you still managed to ruin your Meizu Pro 6, see below for recovery instructions
And so let's begin the process of flashing Meizu Pro 6 firmware
There are several ways to flash the official Flyme OS, I will tell you about the simplest and most convenient in my opinion.
And so first download the required firmware. Please note that on the Chinese version of meizu Pro 6 you can only install firmware with the index “A”, “Y”, “C”, and on the international version of meizu Pro 6 you can install any firmware, that is, “G”,”I”, “A” ", "Y", "C"
Download firmware for Meizu Pro 6 “G” (international) – Flyme 5 5.2.5.0 G
Download firmware for Meizu Pro 6 with index A (Chinese) – Flyme 6 6.0.0.0 A, Beta Flyme 6.6.12.20 (with Russian language)
Then, without fail, we charge our smartphone to at least 60%, so that an incident does not happen
Turn off your Meizu Pro 6 smartphone and, with the phone turned off, hold down the “power” and “volume +” buttons, after the logo appears, release the power button while continuing to hold down volume up until the recovery menu appears. .
Once in Recovery Meizu Pro 6, you will see only two items and two buttons. The first point is responsible for directly flashing the device’s firmware, while the second point is about clearing all data on the phone. To correctly flash the smartphone firmware, you need to check both boxes, as in the photo above.
Then, using the supplied cable, connect your Meizu Pro 6 phone (without leaving recovery mode) to your PC (the operating system does not matter), the phone will be recognized as a USB drive and a folder called Recovery will automatically open. Copy the previously downloaded firmware in the “update.zip” format to this folder.
Once the copying is complete, disconnect the phone from the PC and click the Start button. The process of checking the firmware file will start and only after a successful check will the installation process begin. Typically, flashing Meizu Pro 6 firmware takes 5 to 10 minutes, after which the smartphone will reboot on its own and be ready for use.
Getting Root on meizu Pro 6
You can get root superuser rights on this phone directly in the standard factory firmware, without using additional programs.
We go to the smartphone menu and register for a Flyme account (if you are already registered, then simply log into it). Then Settings -> Security -> Root access and click “Accept” (the root from Flyme appeared). Next, go to the Play Market, find and download SuperSU. We launch it, select “normal” from the proposed installation options, the binary is updated and rejoice.
We rejoice at the full Root
Russification of Meizu Pro 6 6.0.0.0 A firmware via ADB terminal
To Russify the Meizu Pro 6 smartphone, you need to install Chinese firmware 6.0.0.0 A with clear data, you can do this according to the instructions above.
Immediately after logging in, do a factory date reset (settings - about phone - memory - reset settings - delete data - check both boxes).
We re-enter the system and select English and the region Russia. Log in to your meizu account. After entering your Flyme account, I advise you to disable all synchronization.
Let's make root. To get Ruth on 6.0.0.And beta you need:
1. Change the localization & time language to simplified Chinese
2. Then the checkbox in the security item will be available and you can make a root
3. Change the language back to English
Installing SuperSUPRO
In the super su settings, uncheck the “Create a name division...” checkbox.
Install the BusyBox+Pro_v51 program on your smartphone
remove all Chinese user programs
Then you need to install any keyboard from appcentr (for example Gboard) and activate it. After running the script, the standard one will be deleted.
8. Unpack the RUS archive to the root of the phone.
9. Download the ADB fastboot program and install it.
Connect the smartphone to the PC, open adb and type adb shell
– a request to confirm access (digital key) will appear on the device – allow
dialing
adb shell
cd storage/emulated/0/rus
sh install.sh
if you decide to use the terminal
Don’t forget to give the terminal permission from the super su.
execute two commands
su - a request will appear on the phone - allow it
cd storage/emulated/0/rus
sh install.sh
After downloading, activate the GOOGLE keyboard (settings - language, time, keyboard - GOOGLE keyboard must be checked). Then you can enter your Google account.
I also advise you to clear both caches :) You can use the program from the Cache wiper market
Instructions for changing ID on Meizu Pro 6 to install international firmware “G”
To install international firmware with indices G and I in Meizu PRO 6, Chinese identifier: 0x57001001, you need to change to international: 0x57051001
That is, in the file /dev/block/mmcblk0p4 or /dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/devinfo you need to find the identifier 57001001 and change the 4th digit from 0 to 5.
To do this, you need to copy the file to your computer, edit it with a hex editor and return it back with replacement and mandatory setting of the permissions that were before the replacement.
We get Root rights on the device through a Flyme account
In Terminal Emulator we enter the commands:
su
dd if=/dev/block/mmcblk0p4 of=/sdcard/mmcblk0p4
On Meizu, the firmware, like the firmware on any other smartphone, may become unusable or need to be replaced straight from the box. There are many reasons for this. The main reason for reinstalling the OS on Meizu devices is the “purely Chinese” version of the smartphone. Everyone knows that Meizu is a Chinese company, so this is a fairly common occurrence if you buy a device not at an official point of sale. The problem may also lie with the user himself. Android is an open operating system, so it’s not difficult to clog it or disable it. Hence the relevance of the question: how to reflash a Meizu phone. You will find the answer in this article.
Firmware for Meizu phones is a little simpler than other smartphones, and all because of the special Flyme shell.
Before starting the OS reinstallation process, be sure to check some factors that need to be taken into account when flashing any phone:
- First, check your details. If you value the information stored on your smartphone, then you should create a backup copy of all settings, saves, photos and other files you need;
- Secondly, check the device’s charge before starting the reinstallation. This is very important, because if the device turns off during flashing, then you will get a “brick”, because nothing else will bring it back to life. Therefore, for safety, you need to charge the device at least 20, and preferably 50%. If you want to put the phone on charge and start the reinstallation process, then you will not be able to implement this idea, since during the firmware update you need to disconnect the smartphone from any chargers or socket.
Download the firmware from the official website
Meizu firmware is available on many resources on the Internet. But it is not recommended to download from them, since most installation files from “left” sources simply do not work or work incorrectly.
If you see an error "Firmware corrupt", which means you have a Chinese ID, which is why you cannot reflash your smartphone. If you have such a problem, then you should go to flyme.cn. You need to download the installation file from the official website. Download only the international version, because Meizu has as many as 5 firmware variations, 3 of which are Chinese. The advantage and difference between the international version and the other 4 types is that the version for the world market has most languages and has pre-installed Google services. It’s a little unclear how the Chinese live without a play market?!
This point also needs to be taken seriously. It might seem like an ordinary file name, but it has a lot of meaning. The original firmware file always comes with the name " update.zip" If you see some other name, then you should download the firmware from another source, because the wrong file can harm your smartphone.
You need to pay even more attention to the extension - it should be .zip. If the file extension is different, then under no circumstances install it on your smartphone.
It's better not to do anything with the file. You shouldn’t even open it, because if you change anything in it, it can have a very negative impact on your smartphone. And if this does not lead to bad consequences, then it will definitely create trouble with the firmware.
We start the smartphone in Recovery mode
There are several firmware options:
- In the first option, you need to copy the files downloaded from the official website, which will be placed in the internal memory of the smartphone. After that, you need to find the zip file you downloaded in the downloads. After that, click on the file and start reinstalling the software. Do not turn off the gadget under any circumstances. It’s better to put it aside altogether so as not to accidentally mess something up;
- The second method works through the engineering menu, which is also called recovery. To call it, you need to turn off the phone, then hold down the volume rocker, which increases the volume up, and the power button of the smartphone. Before entering recovery, you need to transfer the firmware file to the root directory of the gadget. After entering the engineering menu, click on "System Upgrade" And "Start". The firmware will install itself on your device. After installation, the device will reboot within 3-5 minutes, after which you will be able to fully use it. To find out if updates are installed, you need to go to settings and select " About the phone" There you will see the system software version.
Using a computer
Meizu firmware can be installed not only via a smartphone, but also via a PC. Installing software through a computer is a little more difficult, but more reliable. Detailed instructions will be below.
Download firmware
As mentioned earlier, it is advisable to download the Meizu firmware from the official website in order to protect yourself from wasting your nerves and irreversible consequences for your smartphone.
After reading our instructions, you will learn how to reflash Meizu.
Checking the file name and extension
Before changing the Meizu firmware, remember that it is better to double-check that the name and extension of the flashing file is correct (it should be “ update.zip"). Incorrect files can still harm your device and cause you unnecessary headaches. 
Firmware
As always, you will need to enable Recovery Mod. You need to turn off the device and press the volume up button and the power button on the smartphone. Only unlike the first method, after launching the engineering menu you need to connect the mobile device to the computer via a USB cable. The computer will recognize your device and show you the folder " Recovery", you need to transfer the firmware file into it.
After you have entered recovery, you need to click on “ "System upgrade", then select “ Clear data".If you did everything correctly, then your smartphone should receive an updated software version. Reflashing has a positive effect on the operation of the phone, because as you use it, you download many applications to the device that affect the system in one way or another. Some files can have a negative impact on the system, and even after deleting them, the device will slow down a little.