Yandex Navigator is confidently among the leaders in the ranking of navigation applications for mobile devices. A side effect of this popularity is a large number of difficulties when using. Let's look at the most common complaints and try to fix them.
Unfortunately, this is very vague information, which can be attributed to dozens of reasons, including the user’s inability to run the program and real-life geolocation failures in some areas. Therefore, let's look at the situation in more detail to highlight the various aspects of the problem, and not the trivial lack of knowledge about the operation of the smartphone.
In this material we will limit ourselves to the difficulties that occur when using navigation from Yandex.
The navigator cannot start correctly
The application was installed correctly, but does not even start: it displays error messages and crashes immediately after launch. The reason may be failures when installing the program on the smartphone.
By system requirements Almost any modern device supports Yandex Navigator, so the option with a lack of resources is extremely rare. This can be indicated by constant freezes and long pauses even before basic actions.
The smartphone may not be able to handle the application if it has less than half a gigabyte of RAM installed. For example, 256 MB is very little by modern standards.
As for the first case, you need to delete the program through the phone settings, and then re-install it. So, in Android OS you can use Play Store. If the crash was due to an error during installation, reinstalling will fix the problem.
Why does the program need an Internet connection?
Yandex Navigator can also work if you first prepare the program for this mode. In particular, you need to download to your smartphone the very maps that will be used to display your location without access to the Internet. This can be done from the application itself. Open the “Download maps” section in the menu, then specify the required city. If you are lucky and there is a map, download it.
It is worth noting that Yandex maps on the territory of the Russian Federation, Ukraine and many other countries have very decent coverage, so there is a high probability that there will be no difficulties at this stage.
- Before downloading, switch to WiFi, since some cards are large in size.
- True, it still won’t be possible to completely remove the connection to the Internet, so formally Yandex Navigator really only works online.
The fact is that although the maps are stored in the smartphone, you still need a connection to plot a route and search in the immediate vicinity. To some extent, preliminary calculation of the route helps - then you can move along it without communication. One way or another, exchange via the Internet will be significantly reduced, and the speed of the program will increase.
Of course, without an Internet connection, the Navigator will not be able to download useful information, such as traffic information. Just in case, check: if they are not displayed, perhaps the traffic light image in the corner is currently gray. If so, click on it - the traffic light will be activated and will display the traffic situation in color. And a digital display is used to show traffic congestion from 0 to 10.
There is a route, but the Navigator does not track movement along it
- First you need to make sure that receiving geodata is enabled.
- Then check your Internet connection and its speed (for example, open a website or two in your browser).
- If activated, the Internet is connected, but the program refuses to display the movement, try exiting the application and re-entering it.
- If it doesn’t work, force stop it using a special button from the settings section where applications are shown (the procedure is almost the same for Android and iOS). Launch Navigator again.
If it refuses to drive again, restart your smartphone. Have you tried everything but to no avail? Reinstall the program. Although it usually doesn’t come to this, Yandex programmers have written a good application.
Let’s imagine that even such serious measures did not help. In this case it remains the hard way– stop using Yandex Navigator on this particular smartphone. Since it’s not destiny for them to work together, use analogues.
Voice search crashes
There are several options here:
- The microphone may be broken.
- Or the Internet connection speed is not enough.
- Or maybe the environment is not quiet enough - the street is noisy or the music is blaring.
- It's better not to use it voice search in a noisy environment.
Well, sometimes the Navigator, like other programs, may refuse to function without any apparent reason. Wait, he will come to his senses and start working. Or follow the recommendations from the previous paragraph.
Apple CarPlay Yandex Navigator. Solving a sound problem.
If Yandex Navigator does not work in Uber / Uber, video
What else can cause Yandex Navigator to malfunction?
If the current position is not displayed or changes suddenly, exit the application and enter again. Unfortunately, such failures are possible.
If the arrow indicating the direction disappears, or if you search for satellites for a long time and are periodically unable to maintain contact with them (especially on a long route) check the time settings, set the correct time zone.
For geolocation from satellites The time is also transmitted, and if it diverges greatly from the system time, errors are inevitable.
Occasionally, the program refuses to plot a route, citing the complete absence of a path between points - despite the fact that there is a road and you can drive along it. More often this happens abroad. Alas, the program is not omniscient, and accordingly, routes are not laid out everywhere.
Contact the developers, help improve useful software -
And sometimes there are reasons that in no way relate to the Navigator or satellites. There are several areas in the center of Moscow (in particular, near the Kremlin) where the application does not work. But this is not a mistake, but the foresight of the security services: special transmitters for the protection of strategic objects interrupt the satellite signal, giving out deliberately incorrect data.
Conclusion
In the article, we looked at the main reasons that can lead to Yandex Navigator failures, whether on Android OS or another system.
Add your questions and comments about the program, we will discuss the features of its work with the whole world. Good luck on the road!!!
Many Android smartphone users often complain about problems with GPS. Some claim that it can take forever for a smartphone to determine their location, while others may claim that GPS doesn't work at all.
Most often, similar problems are encountered by users who have flashed their smartphone or who have brand new Chinese gadgets. However, some people note that they also have problems with GPS on new gadgets from trusted companies.
In today's article, we will look at the reasons why GPS on a smartphone may start to work poorly or stop functioning completely, and we will also look at several solutions for these problems.
Ok, let's talk about the reasons why the navigator and GPS may not work well on Android. There are several reasons for this:
- deactivated GPS module;
- disgusting custom firmware for a smartphone;
- damaged GPS module;
- inappropriate GPS Almanac;
GPS stopped working on Android? Try the tips below!
Solutions for problems with GPS on Android
Activating the GPS module
So, let's start with the simplest solution, which you have probably already reached. Before using the navigator on your smartphone, do not forget to activate the GPS module. When starting some navigators, this module can be activated automatically, however, in some cases the user needs to do this independently. Make sure that the GPS module is activated and try using navigation again.
Firmware change
However, what if this module seems to be functioning, but geolocation still does not work? If you recently reflashed your smartphone, then the reason may lie in the firmware. Read reviews from other users about this firmware version and see if they have similar problems. Install some proven Android firmware on your smartphone, where GPS works normally.
Re-recording of the Almanac
But what to do if the GPS module works and you haven’t reflashed your device? As we mentioned in the reasons, owners of Chinese smartphones often complain about poorly working GPS. For example, you can find many users on the Internet Meizu smartphones with a similar problem. Let's assume that you have approximately the same device.
The cause of problems with GPS is Chinese smartphones concludes that they often contain an irrelevant Almanac for our hemisphere. An almanac is a type of data transmitted by a GPS satellite that contains the orbital parameters of all other satellites. To fix the GPS problem in this case, you will need to rewrite the Almanac. This can be done by following these steps:
- activate A-GPS in the settings of your smartphone, and then GPS;
- then log in engineering menu Android by entering the code *#*#4636#*#* into the dialing menu;
The note: If the given secret code does not work, then you will need to find out the code for your smartphone on the Internet. Owners of smartphones with an MTK processor will still need to use the MobileuncleTools utility.
- as soon as you open the engineering menu, go to the tab called “YGPS”;
- now take a look at "Satellites" and check if signs of a signal appear;
The note: if they appear, then the theory with the wrong Almanac has been confirmed and you can continue to follow the steps below.
- go to the “Information” tab and press the following row of buttons one by one: full→warm→hot→cold;
- next you need to click on the “Start” button in the “NMEA Log” tab;
The note: it is precisely this action that will ensure the recording of a new Almanac corresponding to your region.
If the navigator is on operating system Android doesn't work, don't despair; many car owners have encountered this problem. This does not happen because the system is unreliable; it can often be due to a number of internal reasons for the device. The main task is to find out why the device does not work, to identify main reason and find a method to eliminate it.
The navigator on Android does not work, what is the reason?
Availability of GPS navigation modules in modern smartphones surprise no one. This addition is often used by users for walking and cycling. This is extremely convenient, especially when traveling, when tourists wander through unfamiliar city streets and simply cannot find their way to the hotel. That is why users, when choosing an Android smartphone, prefer gadgets with a built-in GPS function.
If on mobile device The navigation system does not work, the problem can be simple to the point of banality - the navigation module itself is disabled. However, this problem makes users who have not fully understood the capabilities of the device nervous.
Important! In order to configure the operation of the device in this case, it is enough to lower the curtain, which hides the necessary screen settings icons, the clock and the notification panel.
In the menu you need to find the “Geodata” item and activate it with a simple click. The icon should change color to blue, green, or orange, depending on your color scheme settings.
After performing this simple manipulation, you can try to launch the navigation program and start using it.
Fact! Some applications specially designed for Android can notify the user that the ability to receive geodata is disabled. This feature is necessary because it will help the user promptly identify the cause of the shutdown and change the settings in the settings.
This is exactly how it goes convenient application"Navitel" which, after disabling geodata, prompts the user to correct this parameter in the navigation menu.
The navigator does not work: common reasons
If the reception of geodata is turned on, and all the applications necessary for full operation are downloaded, but the navigator on your Android smartphone still does not work, you need to look further for the reason. The absence of any changes may be due to the user’s impatience; usually, the device requires a certain amount of time, about 5-15 minutes, to ensure a full connection. During this time, the gadget downloads and processes information about the satellites available within the area, and establishes its own location. 
Attention! The user should not worry, all subsequent launches will not take so much time. This happens only for the first time, similar to the cold start of navigators.
Using the same principle, you will have to download the device if you move to another region of the country. This is due to the fact that the device requires some time to establish its own geographic location and identify available satellites.
Among the common reasons why the navigator may not work well are the following:
- Attempts to start while moving in a car. Some devices tend to “slow down”, so they require some time and immediate calm to start.
- The navigator may not function when you are indoors.
- The navigator may not work well in closed areas: under the canopy of trees. To establish communication, you need to find a suitable area.
If the listed manipulations did not help restore the device’s functionality, although up to a certain point the function worked normally, most likely the cause should be sought in an internal failure of the device. Do not attempt to disassemble the device yourself. It is unlikely that it will be possible to establish the fact of a failure, but such actions can significantly aggravate the situation; it is better to take the device to a service center. In some cases, to restore functionality, it is enough to reset the settings to factory settings - if the reason lies in the conflict of any programs or failures software.
Firmware as a reason for navigator failure
If it is impossible to identify the problem with the naked eye, the best option is a firmware change. This procedure is quite simple and can be done by regular user smartphone. Information for the firmware is entered onto a memory card, which can be placed in the navigator. After this, the device is turned on, and by holding the key, you need to wait until the information about loading the software is displayed on the screen. If the device operates on Android, its logo should appear.
It is important to pay attention to the main points:
- Some manufacturers do not make the firmware publicly available, so you won’t be able to reload the software yourself. To perform the manipulation you will have to contact a service center.
- If the device is under warranty, replacing the software, as well as other interference with its operation, will void the possibility of free repair.
Very often, a malfunction of the navigator on Android occurs when it is necessary to replace the firmware. Users need to remember that despite the apparent simplicity of the actions, they should be careful when downloading. Before updating, you need to charge the phone and scan the memory card using an antivirus program.
Car owners often complain that the navigator does not see satellites. The reasons for such a deviation can be very diverse, for example, a violation of the device’s firmware or physical damage resulting in partial failure of the device. When using Navitel software, users often encounter firmware failures. You can reboot yourself.
Among the list of the most common reasons why a device may not see a satellite are the following factors:
- incorrect operation of the navigation almanac;
- device firmware violations;
- serious damage leading to failure of the gadget.
Problems in connecting the device to the satellite may also arise due to the presence of pronounced structural features of some vehicle windshields. In this case, you need to try to establish a connection outside the machine.
Almanac failure
The functioning of the device implies its correct functioning in 3 modes:
- cold start;
- warm start;
- hot start.
In cold start mode, the device does not have up-to-date data about its own location. This is why connection may take quite some time.
A cold start for Navitel devices can take up to 15 minutes. During this time, the gadget receives updated data for the almanac, information from satellites about the boundaries of the orbit.
When using warm and hot start in internal memory The device contains up-to-date information about the almanac.
Important! The period of correct display of the almanac is no more than 3 months; after this time, all data must be updated.
A long shutdown of the device can result in a failure of the almanac; to restore the basic functions of the gadget, a boot using a cold start is often sufficient. Prolonged shutdown of the gadget may result in failure of the device. In such cases, reinstalling the latest software helps correct the situation.
The device does not pick up satellites due to a firmware failure
What to do if the navigator does not pick up satellites? Quite often, such problems arise against the background of malfunctions of working software.
Important! There are many reasons why Navitel software malfunctions. The most common is long-term use.
To restore the device's full functionality, a flashing will be required. You can perform the manipulation yourself or contact a service center for help. You can easily replace Navitel software yourself by downloading the current version.
Cards current versions will allow the use of new functionality, which are often not available for legacy firmware versions.
Failure of the receiving antenna
If the navigator stops finding satellites, the reason may lie in the failure of the antenna receiving the signal. In order to catch a signal, the antenna needs to be replaced. If the navigator does not see satellites, the significance may lie precisely in the failure of such an element. Repairs in this case will be quite expensive, especially if the antenna is soldered to the board.
The Navitel navigator, like any other, can suddenly stop picking up satellites. In this case, the user should try to determine the source of the failure. If serious damage is detected, you must contact the service center.
On Android based does not / does not determine the location correctly. Navigation does not work or does not work correctly. What to do and how to fix it?
Many users encounter a problem when phone or The Android tablet starts acting up. It seems that nothing happened that could cause a malfunction, but it does not work as it should.
For example, the device has problems with the fact that it has ceased to determine its location either tablet e or The phone's navigation is not working properly. The reason for this may be:
1st: Software glitch - i.e. the problem is a software glitch
2nd: Hardware failure - i.e. the problem is in the hardware (i.e., replacement or restoration of spare parts for the gadget is required)
However, do not rush to get upset - in 90% of cases there are problems operation of location recognition, geolocation, satellite detection, navigation, etc. functions. smartphone a or Android tablet is to blame software glitch which you can easily fix on your own.
Fixing a software glitch:
Method 1. Quite simple - go to "settings", find there « backup and reset", in which you choose full reset settings with deletion of all data. Be careful, using this method is often effective, but it entails deleting all photos, contacts, passwords, music, games, videos and, in general, all information stored on your smartphone e or tablet e. Therefore, first save everything you need by connecting the gadget to your computer. If this method does not suit you, or if after this the problem is not resolved, see Method 2.
Method 2.
Based on solving problems with communication and network reception phone number and tablets based on Android by introducing additional software. Utilities that control all processes inside gadgets. Today, there are quite a lot of them, however, the fewer functions an application contains, the more effective it is, as a rule. Best monitors system functions, adjusts, and fixes everything possible mistakes settings and synchronization is small and easy to use, free utility for Android devices. Download the app from Google Play and watch it additional options in the description it is possible . After installing the application, all that remains is to launch it. Further, in principle, nothing more is required from you. The application will take full control of the device's functions. (By the way, among other things, the gadget will begin to charge 20% faster, and its performance will also increase significantly, which will affect the loading speed and operation of all applications, games, and the system as a whole. On average, after scanning, the system runs at 50% faster.)
- In addition, it is worth cleaning the system using a NORMAL antivirus. Best suited for this task Kaspersky antivirus , which you can download. Unlike the “multi-cleaner”, the Kaspersky Lab software is paid, therefore, if you do not have the opportunity to install such protection, you can skip this step...
Method 3.
Changing the device software, or as it is also called "re firmware ".This method, as a rule, requires certain skills and can be resolved by contacting the Service Center. To carry out this task yourself, you need to contact the website of the manufacturer of your device, download the utilities necessary for flashing the firmware and the firmware itself, and then reinstall it on your gadget.
If none of the methods brings results, unfortunately, you will have to contact Service center For repairing your tablet a or smartphone a.
An Android phone or tablet does not detect / does not detect the location correctly. Navigation does not work or does not work correctly. What to do and how to fix it?