There are many factors that can cause the Highscreen sensor to not respond to commands. Very often, the root cause of such circumstances is mechanical damage; in addition to them, there are also hardware faults, which can only be identified and eliminated in a service center.
First pay attention to appearance your device. Due to dirt or oily droplets, the sensor may not respond correctly to the user's touch. Therefore, you need to constantly wipe the display with a special microfiber. This simple cleaning can get it back into working order. As a preventive measure, train yourself not to use your phone with dirty or wet hands.
A poorly installed film may be the reason why the touchscreen does not respond to finger touches. This happens due to air and dust particles collected between the screen and protective film. To solve this situation, you need to peel off the old film and stick a new one.
Sometimes the Highscreen touchscreen does not work due to the fact that the signals received by the device may not be perceived correctly. In this case, to bring the system back to normal, just reboot the smartphone.
Carefully examine the display for chips. Even small cracks can cause your phone to slow down. As a result, the touchscreen sometimes responds to touches only in some areas. Replacing the touchscreen on your phone in our service center will help you return your phone to full functionality.
If the touchscreen on your Highscreen phone does not work, this may be due to a malfunction or failure of the touch control chip. As a rule, module failure occurs after falls or strong impacts. This can also be caused by water getting inside. Replacing the microcircuit with a new one will help solve the problem.
The touchscreen on your phone may break down due to malfunction of various components. For example, failure to operate may result from the failure of printed circuit board or its components caused by moisture, physical or mechanical stress. Only a complete diagnosis will help identify what exactly has gone wrong.
| Name | Description | Price, rub |
|---|---|---|
| Visit of the master | Travel around the city and up to 10 km. from the city limits. | For free |
| Departure of the master to the region | Travel more than 10 km but less than 45 km. from the city limits on weekdays and weekends until 20:00. | For free |
| Late departure of the master | Travel more than 10 km, but less than 45 km from the city limits on weekdays and weekends after 20:00. | For free |
| Software diagnostics | Software diagnostics of a computer or laptop without disassembling. It is carried out at the client’s location to draw up an estimate of the necessary work. | For free |
| Windows installation | XP/Vista/7/8/10 | from 400 |
| Installing drivers | from 350 | |
| Installing programs | from 400 | |
| Antivirus installation | from 320 | |
| Virus treatment/removal | from 310 | |
| Installing or replacing components in the system unit | Installing or replacing a single part such as:
|
195 — 595 |
| Computer modernization (upgrade) | The cost depends on the configuration you choose and the scope of work. | from 1500 to 13990 |
| Cleaning your laptop | 1895 | |
| Replacement hard drive(Winchester) | from 450 | |
| Replacement motherboard on a laptop | from 3000 to 9000 | |
| Replacement random access memory(RAM) | from 590 + spare parts from 1990 | |
| Replacing a laptop screen | from 790 | |
| Setting up wired Internet | from 280 | |
| Setting up a Wi-Fi router | from 400 | |
| Cabling | from 40 | |
| RJ-45 connector crimping | from 480 |
* The cost of services (price) is determined by the service engineer after diagnostics. Prices do not include the cost of components.
Service center CyberSSL offers home service and repair of any computer equipment in Moscow and the immediate Moscow region:
- we repair computers, laptops, tablets;
- install the necessary programs;
- remove viruses;
- connect and configure the Internet;
- We carry out preventive maintenance of computers and laptops;
- We assemble and upgrade PCs.
Emergency computer help - we will fix your computer today
We organized our work in such a way as to make our computer service convenient and accessible. Our technicians arrive within an hour, conduct diagnostics, determine the cost and approximate time for completing the order. If the problem can be solved on the spot (repair by replacing components, installing and uninstalling programs, setting up Internet access, laying a cable), we will do everything on the day you contact us. If special equipment is required for repairs, we take the computer to the service center and bring it back as soon as it is ready.
Call 8 499 490-65-39. We will solve any computer problem.
- Always only an honest and fixed price for all types of work
- Any level of complexity, including BGA and SMD soldering
- Written guarantee from 3 months to 3 years for the entire range of services
- Free visit of a specialist to a place convenient for you within the Moscow Ring Road
- Any payment for services by bank card Visa or MasterCard
Smartphones and tablets have become a part of our lives; their freezes and glitches often throw users off balance. Today you will find out why Highscreen Spark 2 does not turn on, turns off or freezes.
The article contains a list of recommendations, the implementation of which will help you return your mobile device to its former life | We have prepared a small list of recommendations that will help restore the functionality of your Android device).
Highscreen Spark 2 does not turn on, turns off or freezes, what should I do?
This can be caused by various reasons, for example:
- Battery discharged below permissible level– regularly discharge the battery to almost 0 and charge it completely, do not operate the device at temperatures below -10, this will help it last longer
- Connector charger damaged - try charging the battery with another charger; if charging was successful, then the connector of the first charger is damaged;
- Software glitch - do a factory reset Hard Reset;
- If water gets on the microcircuits, accidentally bathes the device - put Highscreen Spark 2 in alcohol, then take it out and dry it with a hairdryer or immediately take it to a service center;
- Hitting the wall, floor, trying to open beer bottles with the phone - take the phone to a service center or buy a new one.
Why your phone may not turn on or freeze. Video.
Phone recovery phone/smartphone Highscreen model Boost 2 SE on operating system Android 4.3 with color IPS touch screen - 1280x720 dpi made of brick. A modern mobile phone is such a complex thing that it is better not to delve into its insides unless necessary.
It happens that, due to ignorance or carelessness, after an unsuccessful flashing or software change, the phone does not turn on and is blocked. In this condition, the Highscreen phone/smartphone model Boost 2 SE is in operation Android system 4.3 with color IPS screen, touch - 1280x720 dpi called "brick".
It’s clear what to do with a brick, but what to do with such a phone? How to revive it and start it? Of course, there is no universal remedy; for each model Highscreen zera s rev s, five pro, hercules, bay and other models, there are recovery methods phone.
Errors on the phone, how to turn on the phone Highscreen alpha rage, spade, pure f. Restoration from brick condition.
Information on how to restore Highscreen verge, winwin, pure j, Highscreen thor black, Alpha R, omega prime s miniphone after flashing or from a locked state, or when the phone does not turn on, you can read on specialized forums and websites.
Carelessness or error when flashing the firmware of the Highscreen model four phone/smartphone on the Android 5.1 operating system with a color IPS touch screen - 854x480 dpi.
If you did something unhealthy to your Highscreen omega prime s mini, spider, winjoy phone, and after that it stopped loading at all and will not allow you into recovery, FTM or fastboot, then do not despair. There is one more remedy left:
Restoring dead Highscreen phones that won't turn on at home.
- restoration of Highscreen phones, after unsuccessful firmware. The description posted on the site uses the so-called Jag method. The essence of the method is that it is necessary to make a special Jag plug by soldering contacts (4 and 5) together through a 301 kOhm resistor. This Jag is inserted into the Highscreen zera s rev s phone, color IPS, touch - 960x540 dpi with the battery removed. More details on how to restore your phone this way are described here.Restoring your Highscreen phone to working condition.
- for phone owners. You can view a list of all supported devices such as phones Highscreen five pro color AMOLED, 16.78 million colors, touch - 1280x720 dp and others, Motorola FAQ on phone restoration is posted on the link above. The site also provides a description of how to restore a phone by closing the contacts when the battery is removed.Before restoring your phone, you need to download and install special program on PC: Random "s Developments Flash & backup. Next you need to: remove the battery, connect pins 4 and 5 (see photo) to each other on the phone connector (see photo), keeping the needles closed, insert the battery, open the needles, insert the cord into the connector and connect to the computer, in Random's Developments Flash&backup program should display a message that the Highscreen Hercules color IPS phone, touchscreen - 1920x1080 dpi is connected.
Restoring a Highscreen phone from a brick state.
- this method of restoring Highscreen phones black gtx, Zera U, spark different models, different manufacturers. When restoring a Highscreen yummy duo, boost 3 pro, blast phone, special software is used: a standard flasher from MTS, a programmer from ZTE and a HEX editor. A detailed description with screenshots of the actions is posted on this page of the site (see link).Restoring a Highscreen phone using the SEMCtool program.
- these instructions are for restoring some Highscreen models. Symptoms of failure: the phone Highscreen strike, alpha gtr, explosion hangs on “Please wait”, the white display flashes, there is no network signal, there is no connection through the DCU-60, neither through “C” nor through “2+5”. The method for restoring phones is Highscreen bay color AMOLED, touch - 1280x720 dpi posted on this site - using a service cable, together with SEMCtool v8.7 software, which can be downloaded for free on the same site.Restoring a water-damaged Highscreen cell phone - a drowned one.
- instructions with pictures on how to restore a Highscreen cosmo, jet duo, power ice phone after it falls into water. To prevent corrosion of phone elements Highscreen alpha rage color IPS, touch - 854x480 dpi, you need to very quickly remove it from the water and remove the battery. Then the case is removed and the phone is placed in a jar filled with rice for two days. The fact is that rice absorbs moisture very well and is an excellent absorbent. Ordinary homemade rice will draw out all the moisture from the smallest components of the Highscreen zera f, Boost 2 SE, four phone, and also prevent corrosion. You can use cat litter as an absorbent at home.How to resolve "Operation Error" in Java on Highscreen phones.
- instructions for users of Highscreen zera s rev s, five pro, hercules phones if they have problems installing applications or games on their phone. If, when entering the application/game folders, the message “Error during operation” pops up, this means that the Java machine on the phone has crashed. Highscreen spade color IPS, touch - 1280x720 dpi. This problem can be resolved by simply removing and inserting the memory card into the phone. If this does not help, more complex actions will be required. To restore the functionality of the Java machine, you will need to reflash the firmware FS file and finalize it. More details on how to do this are described in this article.How to turn on your Highscreen phone.
To enable touch phone Highscreen bay, alpha rage, spade, you need to do the following:
Press and hold the Power key until the phone vibrates.
- If the phone was turned on, but the screen went dark, press and release the Power key to turn it on.
- an image of a lock will appear on the screen; to unlock the screen, drag the lock icon or click on it.
- when prompted to enter a code, enter the PIN code from your SIM card. In most cases this is 0000 and click OK.
- wait for the phone to start.
Note: The PIN code for the SIM card is located on a plastic card or in the package received when purchasing a SIM card in the salon cellular communications. But be careful, if the PIN code is incorrect three times, you can activate the SIM card only through the PUK code, which is also included in the package received when purchasing the SIM card. If the PUK code is lost, it can only be restored using the passport of a citizen of the Russian Federation for which the SIM card is issued. Therefore, do not enter your PIN incorrectly more than three times. If you have lost your PIN code and there is no way to recover it through your telecom operator, you can do the following.
Cancel the request to enter a PIN code when turning on the Highscreen pure f, verge, winwin phone. To do this, find another SIM card with a PIN code you know (you can assign a PIN code in the settings) and insert it into your phone. Turn on the phone according to the steps described above, when entering the password, enter the PIN code you know from another SIM card. Having successfully turned on the phone, go to the phone settings and cancel the request to enter a PIN code when turning on the phone Highscreen pure f color IPS, touch - 800x480 dpi. Having done this, turn off the phone and change the SIM cards. Now, when you turn on the phone, the system will not require you to enter a PIN code.
This is, of course, elementary advice, but there are solutions to more serious problems.
Advice. The SIM PIN is initially provided by your network operator, but can be changed in the Settings menu. To correct an error when entering your SIM card PIN, tap the “Delete” icon.
Highscreen phone won't turn on! Error during phone self-test
The very first thing you need to do is try to reflash your Highscreen omega prime s mini, spider, winjoy phone. But the problem of the phone not turning on can be not only due to “crashed” software, but also due to a breakdown of the phone’s on/off button, breakdown or failure of the battery - charger, etc.
Highscreen phone won't turn on. What to do?.
- Very detailed description fixing the problem phone Highscreen black gtx, Zera U, spark does not turn on, how to turn on the phone. The article is divided into points, with a solution to each problem point by point: checking the power source - the battery, the power button is faulty, the power button circuits, the power controller or its soldering is broken, secondary power sources - power supply to the processor, memory, etc. devices, setup software mobile phone phone Highscreen pure f color IPS, touch - 800x480 dpi.Instructions for restoring a phone Highscreen verge phone on the Android 4.4 OS platform on a screen with a resolution of 1280x720, color IPS type, touchscreen from a non-working state - brick More details on how to restore the device, turn on the touchscreen Highscreen power ice, zera f, Boost 2 SE, four, zera s rev s, five pro, hercules, bay, alpha rage, spade, pure f, verge, winwin, pure j, spark 2, thor black, Alpha R, omega prime s mini, spider, winjoy, black gtx, Zera U, spark, yummy duo, boost 3 pro, blast, strike, alpha gtr, explosion, alpha gt, cosmo, jet duo and what to do if cellular smartphone does not turn on.
Popular reviews on Highscreen
| Cuts launch quickly on the phone and do not take up much space in the phone's memory. | |
| You can learn more about how to Download Highscreen music for free here; to do this, follow the link above. | |
 | Here you can find the latest and most current drivers for mobile phones and Highscreen tablets. This link contains the correct, correct programs and latest versions drivers for mobile devices Highscreen. |
| Where to download and how to install the application for free - Rules Road Traffic with questions and answers and explanations on Highscreen | |
Sometimes the phone stops showing signs of life. What is this connected with? There are many options, from hardware problems to firmware and software. How to figure it out? Consistently follow the instructions below.
Was the device heavily discharged? If so, it will take a sufficient amount of time to restore the deep discharge. Some models require up to an hour to accumulate capacity. Try to avoid such cases, this affects the duration of work. Discharge to 20-10 percent and send your smartphone to charge. It is not recommended to keep it on charge; this will negatively affect the battery. The gadget may sometimes blink, show a black screen or various symbols. Wait half an hour, the device should turn on on its own. Advice for long-term use - if possible, do not use highscreen outside when it is cold. Low temperatures have a detrimental effect on the main components and drain the charge faster.
Check the integrity of the charging wire. If it is of poor quality, the possibility of sudden failure increases significantly. Try to buy only original wiring, then you will be sure that they will not suddenly fail.
Another option why the equipment does not turn on is that the socket (the hole where the charging plug is inserted) is broken. Possibly due to moisture, debris, damage (attempts to insert connectors not included in the kit). Replacement at a service center costs about a thousand rubles.
If the gadget falls into water, it must be removed as quickly as possible and dipped in alcohol, left for exactly a minute and placed under a hairdryer. Dry and leave alone. By taking action, there is a chance that the product can be saved.
Did you drop the phone before it completely disconnected? If yes, then there is a high probability that a qualified diagnostician can help. Damage can be of various types; an experienced technician is needed to diagnose the damaged element. We also want to warn those who like to open bottles using technology - you reduce your life activity significantly.
If you downloaded unfamiliar software before shutting down, tinkered with the settings, and you don’t have an antivirus, you need to reset it to factory settings. In most cases this helps. Please note that all data not located on removable media, will get lost. In many models, when you remove the back button, you will find a bulge, the so-called Hard Reset. Clicking it will start the reset process.
If the battery is removable, remove it for a while.
Possibly faulty home button- the main and sometimes the only one on the display. Sometimes the device shows signs of life - flickering, blinking.
If you connect your smartphone to a computer and see data on the PC, flash the device, the procedure mostly helps. If not, we strongly recommend contacting a service center. You can completely destroy the unit on your own.
As the practice of specialists shows, most often the problem that the highscreen does not turn on is that the battery is deeply discharged. Put the unit on charge, be patient, and most likely the equipment will turn on and will delight you for a long time!