Everyone knows what communication problems a person has if he is deprived of the opportunity voice communication. Like any other team WoT game involves voice communication with other participants in the battle. But sometimes it happens that technology fails. What to do if it suddenly becomes impossible to talk with other participants in the game? First, let's look at why the microphone may not work at all.
Why the microphone does not work in World of Tanks
The microphone may not work for various reasons. Alternatively, you should first check whether this feature is enabled in the game itself.
To do this, go to the “Settings” menu and find the “Sound” tab. Please make sure that there is a checkmark next to the “Enable voice communication” item. If it is not there, then install it. In the drop-down tab, check whether the microphone installed in the system is selected and whether it is there at all. At the same time, look at the sensitivity of the microphone. If it accidentally stands at zero, then set the desired value. If everything is fine on this tab, then you need to look into it further.
Let's try to find out where exactly the problem occurs. You can launch Skype and check if the microphone works there. If the device works in Skype, then. The problem is in the game.
A similar check can be carried out using standard tools. operating system. Let's use the Audio Equipment Setup Wizard. To launch it, you need to go to the “Control Panel” and find the “Sounds and Audio Devices” item there. This tool allows you to initially record your voice and then play it back through the player. With its help, you can make high-quality sound settings, without the admixture of extraneous noise.
ATTENTION! It is possible that the microphone in the game does not work due to poor contact between the device and the socket on the sound card, or there is damage. Make sure that the microphone wires are not broken and connected properly.
If the device is working normally, but there is still no connection in the game, then the problem is due to third-party reasons.
How to set up a microphone in World of Tank
Sometimes the sound of the microphone may disappear because some players, especially those who have little knowledge of both the game and the computer in general, when studying the WoT settings, reset them all to standard. Therefore, the sound may disappear, because the game no longer sees the microphone and it needs to be configured again.
In this situation, there is no need to reset the settings again, you just need to check the “Enable voice communication” item in the sound tab. After that, we update the devices and select the microphone we need. After this, we test the sound from the selected device. In addition, you can adjust the settings.
There are times when some firewalls prevent the game client from working with ports that have audio devices.
This can be checked by simply disabling the firewall. If there is sound from the microphone, then the reason is due to blocking by security means.
ATTENTION! To correct this situation, you need to allow the following ports: 12000–29999 UDP, 80–443 TCP, 5060–5062 UDP and 3478–3479 UDP. As soon as the necessary rules are described in the settings, the sound will no longer be blocked.
There may also be no sound due to the computer's processor being overloaded. It simply can't handle all the commands that are sent to it. This often happens with older models. In such situations, the sound may become distorted and disappear.
To resolve this situation, you need to disable programs that use the most CPU.
There is one bug in the game itself. If the user previously played “team battles” and then started the game in a platoon, he may not be heard in the general chat. To get rid of it, you need to restart the game client, and if that doesn’t help, then restart the entire computer.
Sometimes it happens that the game is already loading with an error, in this case voice messages impossible. At the same time, the user cannot notice anything externally, because the game works properly, all tanks can take part in hostilities. In this case, similar to the previous situation, a complete reboot is required.
And most importantly, to minimize the likelihood of voice communication disappearing, you need to regularly update drivers sound card. If you connect to the Internet through a router, then do not forget to periodically update its drivers. The best option will install a program that monitors the relevance of versions of all system drivers and automatically updates them. And the last point - do not set the microphone gain above ten decibels. This often leads to the connection disappearing. From time to time, the client simply cannot detect devices with such settings.
The thing is that for voice chat to work correctly, you need to make sure that your antivirus and firewall do not block certain ports in the launcher and game WoT client.Picture 1. An error occurred in initializing voice communication.
List of ports:
UDP ranges from 32800 to 32900, from 20010 to 20020 and UDP port 53.
TCP ports 80, 443.
It is also worth noting that for stable operation of voice chat you need to provide a UDP range from 12,000 to 29,999 and ports 5060,5062, 3478, 3479, 3432, 30443.
The information will most likely seem incomprehensible, but in this article we will teach you how to properly solve the problem with voice chat.
Solution
If you find that your firewall is blocking a game or application from launching, then you just need to add it to the exceptions list. But there are cases when applications are not displayed in the list of blocked ones, but when launched, “Error initializing voice communication” occurs. The initialization may have been blocked by your firewall." In this case, you need to open a port for this application. This is not at all difficult to do:You may also have problems allowing other computers to connect to your PC through your firewall. To solve them, it is recommended to use special remedy to troubleshoot incoming connections, which will automatically fix any problems that occur.
You can find this tool by opening "Start" -> "Control Panel". In the search bar, type “troubleshooter,” then click on “Troubleshoot.” Separately press the button "View all categories" and select "Incoming connections».
In this way, you can get rid of “Voice initialization error. Initialization may have been blocked by your firewall" and you will be able to freely communicate with other players in World of Tanks using voice chat.
From time to time, World of Tanks players lose voice communication. In this regard, it is worth understanding why voice communication may not work.
Why do you need voice communication and how to enable it
Just a couple of years ago, players had to use the same Skype to keep in touch for smooth interaction. Today, for this purpose, there is voice communication in WoT, which allows you to lighten the load on the system and communicate without delays.
To support the communications function, you must first create a platoon. Next go to " Menu » — « Settings " - tab " Sound " - check the box " Enable voice communication " You can set up voice communication in World of Tanks in the same tab " Sound ».
Why does voice communication disappear/not work? How to fix?
- microphone malfunction;
- client problems;
- blocking a function by a firewall or firewall;
- CPU overload.
Microphone malfunction
The first step is to check that the microphone is connected correctly and is working properly. To do this, you can use the test from Skype or record your voice on the voice recorder that is included in every Windows.
If everything is fine there, it’s worth looking at what microphone is the default in the game settings. In the same window where voice communication is enabled, there is a field indicating the name of the microphone being used. If there is a microphone there that the computer uses when recording voice in other programs, then you need to look for the problem below.
It is also worth paying attention to the voice communication settings in World of Tanks. Perhaps you should twist a few shingles and everything will become perfectly audible.
Problems with the client
Some players encounter a so-called bug when, after playing several battles in team play mode, the sound suddenly disappears. As many users note, only restarting the PC can help.
Blocking a function by a firewall or firewall
Very often means software protection block not only voice communication in WoT, but also the sound ports of the device. To check this, you need to disable the firewall. Did it work? So it’s worth changing the defense.votes
World of Tanks is a multiplayer project, so you often have to communicate with other players, coordinating actions or simply finishing off the enemy with words. The game has a voice system specifically for communication between gamers, but sometimes users still have the question of how to set up a microphone in World of Tanks.
Equipment check
After connecting the microphone to the computer, the device should be automatically detected by the system. All you have to do is install the drivers and launch the game itself to check the connection quality.
If you can't be heard:
- Make sure the microphone is working. Connect it to another computer or use it in any application (for example, make a Skype call).
- Check if you have connected the sound card correctly.
- Try adjusting the sound on your computer: check the drivers sound card, volume settings, etc.
Setting up voice chat
If you have connected a microphone to your computer and are convinced that it is working, check the settings of the game itself. You may simply not have activated the voice chat feature. To correct this oversight:
Go to Settings and go to the Sound tab. 
Find the “Voice Communication” section and check the “Enable” checkbox.
You can also assign a microphone activation button. The default key is “Q”, but you are free to choose any other unassigned button. When you press the activation button, green waves will begin to emanate from your nickname in the game, signaling that you are connected. 
If necessary, you can click the “Update devices” button - sometimes this allows you to solve some problems with automatic detection of connected equipment.
Open the platoon management window. Click on the user's nickname right click and select "Disable voice messages" 
This can be done both in the hangar and directly in battle.