However, it came out for many iPhone owners, iPad and iPod touch its exit was marred by a failure to activate the system. Fortunately, there is nothing critical about this error. You can find out what to do if iOS 9.3 activation fails in this instruction.
There can be many problems when activating iOS 9.3 on the first day after the update is released. The main part of them, judging by experience previous versions iOS, is associated with the unavailability or overload of Apple servers, and the most common error is the message “Your iPhone could not be activated because the activation server is temporarily unavailable.” Fortunately, getting rid of this error is quite simple.
During iPhone activation You may encounter various errors, the list of which is listed below:
- “Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate, or try again in a few minutes."
- "The iPhone is not recognized and cannot be activated for service."
- "SIM card in this iPhone not supported."
- "iTunes can't verify your device."
In all these cases, the tips below should help.
Wait a few hours
In the first hours after the release of iOS 9.3, Apple servers were extremely loaded and it was because of this that activation errors began to occur operating system. The most correct and simple move if you are experiencing problems activating iOS 9.3 would be to postpone the update for several hours. Let Apple engineers restore the correct operation of the servers, and let the majority of users update - after that, with a high probability, installing iOS 9.3 on your device will go like clockwork.
Use a different Wi-Fi connection
A Wi-Fi connection that blocks your smartphone from connecting to Apple servers may be one of the reasons why you cannot activate your iPhone. Take advantage of another wireless connection and try again.
Try activating your iPhone through iTunes
Connect your iPhone to your computer, open the latest iTunes version and try to activate your smartphone. This method is best used if you do not have the opportunity to connect to another Wi-Fi network.
Reboot your iPhone
Problems with iPhone activation can be solved after a simple reboot of the smartphone. Reboot your device and try to activate it again.
Restore iPhone via iTunes
In most cases, the first four tips will solve the problem with activating the iPhone, however, if all else fails, it’s time to bring in the “heavy artillery.” iPhone recovery This is done as follows: by pressing and holding the Home button, connect your smartphone to the computer. The device will be recognized by iTunes in recovery mode, after which you will need to click the "Restore" button.
What is useful to know:
Buying a device from Apple is a joyful event. But after turning on the device for the first time, the user may encounter a number of problems. For example, with gadget activation. Not everyone knows about this operation. We have to figure out how to activate the iPhone 5S. What is needed to bring an idea to life? If you carefully follow the simplest instructions and also read the text on the phone display, you will be able to do this in the shortest possible time. Where to begin?
What's useful
Let's start with preparation. Activating an iPhone 5S is impossible without some details. Typically, users have no problems preparing for activation. In particular, among Apple fans.
In general, this will require:
- SIM card;
- connection to a network via Wi-Fi (or a computer with the Internet and iTunes);
- power supply;
- phone charger;
- SIM card clip;
- USB cable.
This will be enough to activate the Apple device in any way. Getting an iPhone 5S to work isn't that difficult. Next we will look at the activation procedure in detail.
Activation steps
How to activate iPhone 5S? More on this later.
First, you should pay attention to the fact that this process consists of several stages. Namely:
- inclusion;
- selecting basic phone settings;
- direct activation;
- launching the device for the first time.
We will definitely be able to learn about all these stages further. Everyone can get started with the iPhone 5S without much difficulty.
Sim card
The first thing to do is insert a SIM card into the phone. Apple devices excel in this regard. They provide a special process for connecting a SIM card.
How exactly to proceed? The owner of an Apple phone must:
- Take a paper clip for the SIM card.
- Insert the mentioned component into a special hole on the side panel of the smartphone.
- Click on the paper clip.
- Remove the SIM card slot.
- Insert the SIM card into the slot.
- Return the component back to the phone.
Turning on the device
The next step is to turn on the smartphone. To do this, the user must first connect the device to the charger and plug it into an outlet. With zero (or minimal) battery charge remaining, activation will not be possible. It will simply stop. To successfully cope with the task, you need to have a charge of at least 20-30%.
How to activate iPhone 5S? On the top panel of the Apple phone, you need to press the power button. After holding it pressed for several seconds, the device will start.
If everything is done correctly, a silver apple will light up on the display. This sure sign that it's time to move on to the next step.
Basis
Did the person buy a phone from Apple? The iPhone 5S, like any other Apple device, will have to be activated. Otherwise, it will not be possible to work with him. Fortunately, everything is not as difficult as it seems at first glance.
The activation instructions for iPhone 5S are divided into several simple steps. After turning on the device you will have to set basic settings phone. It is proposed to do this as follows:
- Swipe from left to right along the bottom of the display. You need to do this when the welcome screen lights up. It will say "Hello" in different languages.
- Select the desired system language. Just tap on the corresponding line.
- Indicate the citizen's country of residence.
- Connect to the Internet. For example, by clicking on the “Select network” hyperlink and then specifying a particular Wi-Fi.
By the way, you need to be extremely careful when connecting to the network. After all, the further activation of the iPhone 5S will depend a little on this. First, let's look at the situation with connecting to Wi-Fi. This is the most common layout.
Basic steps
How to activate iPhone 5S with a SIM card? As soon as the user connects to the Internet, a form will be available for him to fill out. It will help you configure your phone for the first time.
The iPhone activation guide looks like this:
- Enable or disable geolocation. To do this, click on the appropriate line.
- Select the "Like New" option.
- Create an AppleID profile.
- Click on the "I agree" button. It is located at the bottom right of the display.
- Click on the words “Install now” and place your finger on the selected area on the screen. This step can be postponed. Just click on the appropriate button.
- Set a password for working with an Apple device.
- Click on the "Allow sending data to the Apple server" or "Do not allow" button. It all depends on personal preference.
Ready! If everything is done correctly, the message “Welcome!” will appear on the screen. It will inform you that the device has been successfully activated. But what if there is no Wi-Fi network? Then you will have to carry out the procedure through a computer.
iTunes, PC and iPhone
In reality, everything is much simpler than it might seem initially. We already know how to activate an iPhone 5S. If the user cannot find a Wi-Fi network, he will have to carry out the procedure using a computer or laptop.
Under these circumstances, it all starts with installing a program called iTunes. All owners of Apple gadgets should have it. Will have to download latest version programs. Otherwise, the application may malfunction.
Installation iTunes file downloaded from any available source, after which the exe document is launched on the computer. The installation wizard is activated. By following the instructions on the screen, a person will be able to complete the initialization of the software. It's absolutely free.
Connecting to a computer
How to activate iPhone 5S without a SIM card? You can operate through a computer and iTunes. This technique also helps to cope with the task if there is no Wi-Fi connection.
You need to properly connect your Apple device to your computer. How it's done?
The following type of instructions will help you cope with this task:
- Take a USB cable.
- Insert one end of the cable into the appropriate connector on the phone.
- Plug the other end of the cord into the USB port on the computer.
- Launch iTunes.
- Wait a little.
This way, not only will the connection occur, but also the devices will be synchronized. It is very comfortable. Especially considering that now the user will be able to activate the iPhone 5S without much difficulty.
What exactly should I do? Follow the instructions on the screen. They are no different from the steps listed earlier. The only difference is that when connecting via a PC, you do not have to insert a SIM into the device, and there is no need to turn on Wi-Fi.
Without iTunes
How to activate an iPhone 5S if a person does not have a SIM card? There may be problems with this operation. Especially if the user does not want to work with iTunes.
Without a SIM card it is almost impossible to cope with the task. Although experts recommend working with iTunes to bring your idea to life. Or you should follow the instructions below.
It has approximately the following structure:
- Turn on the phone.
- Press the "Home" button on your mobile device.
- Select "Emergency call".
- Dial "112".
- Press the call button.
- Click on the "Turn off" button.
- Select the "Cancel" option.
- End the call.
It is done! Now the user will have a fully working device. But, as a rule, sometimes iPhone activation fails. What difficulties might you encounter under certain circumstances?
Problems
Apple smartphones are the most common technology. It's high quality, but even it sometimes fails. What difficulties might users encounter when thinking about how to activate an iPhone 5S?
The following situations and ways to solve them can be distinguished:
- If you do not remove the film from mobile device, the "Home" button will be difficult to press. Because of this, the device may be blocked. The solution is simple - you can press the “Enable” button on the gadget during auto-locking.
- Absent Wi-Fi connection. IN in this case Only connecting an Apple mobile phone to a computer with iTunes will help you cope with this task.
- Problems with device synchronization. They usually disappear if you update iTunes on your computer.
- iTunes update failed. Removing it is as easy as shelling pears. It is enough to first close the application completely. Only then is it allowed to update it.
- Inability to take fingerprints. To achieve this task, you need to remove the factory default from the screen. protective film. The mentioned operation will not work with her. The sensor simply will not be able to recognize fingerprints.
These are the most common problems. Now it’s clear how to deal with them. Activating your iPhone will no longer cause any trouble or hassle.
Results
We figured out how to get an Apple phone to work for the first time. The instructions below will help you activate any iPhone. The main thing is to properly prepare for the procedure.
At first, you can refuse to create an AppleID. Without this profile, the phone owner simply will not have the right to use Apple services. For example, iCloud or AppStore. Therefore, it is advisable to immediately start Apple ID.
The first thing you need to do after purchasing an iPad is to activate the device, otherwise this expensive tablet from Apple simply will not work. There are two main ways to activate an iPad: using a computer, and directly using the iOS menu.
This method of activating an Apple gadget is suitable for all generations of tablets, including the latest modification - iPad Mini with Retina. To activate you need:
- Install on your computer;
- Connect the tablet to the control panel using the included cable (iPad must be turned off);
- Press the power button of the device and do not release until the signature white apple appears on the screen;
- Launch iTunes.
All necessary steps have been completed, and now you can use the Apple tablet in the required mode.
Activation without a computer
This feature is only available for devices with iOS version 5 and later. The method is very simple and only requires a connection to the Internet via Wi-Fi. We perform the following manipulations:
- Turn on the iPad by holding down the “Power” button until an apple appears on the screen;
- We follow all the instructions shown on the display.
You may need to find out the date when the iPad was activated for several reasons:
- When purchasing a used device, to find out the actual lifespan of its use;
- Is the iPad still under warranty? It is important to remember that the warranty for Apple devices begins at the time of activation, not purchase.
To find out when your iPad was activated, you will need to know serial number, which can be found out in two ways:
- Method number 1. Using the iTunes menu with the tablet connected, find your device and click on it. The serial number will be displayed in the gadget information.
- Method number 2. Using the iOS menu, go to “ Settings» — « About this device", where the information we need is located, which can not only be viewed, but also copied to the clipboard.
To find out the information we are looking for, you need to visit a special page on the Apple website and enter the iPad serial number in the form on it. Next, click on “ Check».
Find out the manufacturing date of the iPad
There is a special service on the Internet with which you can find out the production date of any Apple gadget. To do this, follow the link and enter the device serial number into the available form. Now we are interested in the following lines:
- Production year - year of manufacture of the Apple device;
- Production week - week of production.
After purchasing a fresh iPhone, iPod or iPad, or simply doing full reset, for example, to fix problems with the operation of the device, the user needs to perform the so-called activation procedure, which allows you to configure the device for its further use. Today we will look at how device activation can be performed through iTunes.
Activation via iTunes, that is, using a computer with this program installed on it, is performed by the user if the device is not able to connect to a Wi-Fi network or use cellular communication for Internet access. Below we will take a closer look at the procedure for activating an Apple device using the popular iTunes media combiner.
How to activate iPhone via iTunes?
1. Insert the SIM card into your smartphone and then turn it on. If you are using an iPod or iPad, start the device immediately. If you have an iPhone, then you won’t be able to activate the gadget without a SIM card, so be sure to take this point into account.
2. Swipe to continue. You will need to set the language and country.
3. You will be prompted to connect to Wi-Fi networks or use the cellular network to activate the device. In this case, neither one nor the other suits us, so we immediately launch on computer iTunes and connect the device to the computer using a USB cable (it is very important that the cable is original).
4. When iTunes detects the device, in the upper left area of the window, click on its miniature icon to go to the control menu.
5. Next, two scenario options can develop on the screen. If the device is linked to its account Apple records ID, then to activate it you will need to enter the address Email and the password for the identifier linked to the smartphone. If you configure new iPhone, That of this message It can’t be, which means you can immediately move on to the next step.
6. iTunes will ask you what you need to do with your iPhone: set it up as new or restore it from backup copy. If you already have a suitable backup on your computer or iCloud, select it and click the button "Continue" to have iTunes proceed to activate the device and restore information.
7. The iTunes screen will show the progress of the activation and restoration process from the backup. Wait until this procedure is completed and under no circumstances disconnect the device from the computer.
8. As soon as activation and restoration from the backup are completed, the iPhone will reboot, and after restarting the device will be ready for the final setup, which includes setting up geolocation, enabling Touch ID, setting up a digital password, and so on.
In general, at this stage, activation of the iPhone via iTunes can be considered complete, which means calmly disconnect your device from the computer and start using it.
The most common problem with an iPhone may be the appearance of error 0xe8000013, which notifies you that the phone has experienced an activation failure.
Why does iOS 11 activation error appear?
Activation failed iPhone iOS 11 can happen for several reasons. The most common is considered to be a failure of the Apple service. This happens when new available types of settings are added.
At the same time, too many users are trying to take advantage of additional features, which leads to some violations. An equally common occurrence is the inability to activate an unlicensed device.
Is it possible to fix an iPhone with error 0xE8000013 in the service?
If the failure occurred after flashing the firmware or with a phone that was working fine before, specialists can try to restore the settings or replace the faulty modem.
But you should take into account the fact that not all services and specialists undertake to eliminate such a malfunction.
How to check iPhone for error 0xE8000013
It is very easy to check any iPhone for iOS 11 activation errors; to do this, you will have to use the Apple service; the manipulations are performed in the following sequence:
- We go to the company’s website and select the item: “Checking rights to service”;
- Enter the serial number or IMEI combination in the appropriate field.
- After the data has been entered, information about your phone should appear on the Apple website with the specified date of purchase, activation and service period.
Note: be sure to check the data received in the phone itself with the serial combination on the iPhone packaging; if the numbering does not match, they are trying to sell you an unlicensed product, that is, a fake
How to solve the problem with activating an iPhone with iOS 11: possible options
You can try to fix iOS 11 activation failure in several ways, although no one can give clear guarantees of any of the methods, because it all depends on the causes of the problem.
Restarting the device
In some cases, to fix the iPhone iOS 11 activation error, simply reboot the phone device. To reboot using the first method, you must simultaneously press the “Home” and “Power” buttons and hold for about ten seconds.
Then the device is turned on again; if the problem was related to the quality of the firmware, this method may help. Using the second method, you need to press the same buttons, but hold them for only three seconds. At the same time, they monitor the screen and at the moment when it goes out, they turn on the phone.
Network change
Since iOS 11 only went live in 2017, some carriers may reset the activation request.
Therefore, if iPhone iOS 11 activation fails, the solution may be to change the network. To do this, simply change the SIM card to a card from another operator and turn on the communication device.
Note: It happens that the cause of the activation problem is a faulty SIM card or its absence. Despite the fact that this reason seems almost absurd, sometimes this happens.
Activation via iTunes
Activating iOS 11 errors is now possible with the help of. To do this, the latest version of the player must be installed on your computer.
After this, you need to turn on the phone and connect it to the computer, iTunes should recognize the communication tool and activate it.
Restoring a device to fix a problem
When you can no longer fix the activation error on iOS 11 in simple ways, you can use another launch option using iTunes.
To do this, insert a SIM card, turn on the device, hold down the Home button and, without releasing it, connect the phone to the computer.
Holding down the Home button allows the program to recognize the telephone device in a special mode, and you just need to confirm the restoration.
Devices with activation problem on iOS 11
Bugs during activation on iOS 11 are possible on any device, the thing is that despite excellent advertising and many advantages, the software still has its flaws.
Many people make the mistake of rushing to change the firmware as soon as it appears; over time, any service will improve, but initially it is released in a rather “crude” version.
Activation fails on iPhone 5S iOS 11
This problem with 5S, for which the latest version of the software is used, is not uncommon, as are freezing of the device, interruptions in communication, rapid discharge and many other side effects of a powerful service.
iPhone 6/6 Plus activation error
Is being decided using standard methods, may arise due to failures in the system itself, incompatibility with the SIM card and some other problems.
The search for a solution to the problem is carried out taking into account the error data.
iPhone 6S/6S Plus activation failed
Most often characterized by error 0xe8000013 iOS 11, which occurs in restored phones if the procedure was not carried out in an official service center using non-original parts.
iOS 11 activation fails on iPhone 7/7 Plus
With this device, activation problems may occur due to operator resets, when the product is not in service, that is, it is counterfeit, or when the system is too busy.
iOS 11 activation fails on iPhone 8/8 Plus
Occurs when the device was repaired or flashed incorrectly specialized service, after unauthorized interventions, the installation is simply blocked by iOS 11 itself.
The only solution can be to contact a “left” specialist again, who in rare cases can find a way out.
iPhone X activation error (ten)
Apple rejects any possibility of failures for this model, citing the fact that activation is impossible only in the case of an out-of-date flashing or restoration with non-original spare parts.
But in reality, the inability to start can occur even with almost new devices.
iPad on iOS 11 activation failure and solution from Apple
On activation failure iPad iOS 11 Apple has not yet found a solution, or to be more precise, the problem has not been officially recognized.
Therefore, an appeal for technical support does not give any results. You can simply use the methods suggested by users to start it.
When will the activation error on iOS 11 be completely fixed?
Bugs with functioning and activation, Apple promises to fix before the spring of 2018, but new additions threaten new troubles, such as the impossibility of rolling back, although rolling back can become a saving straw for cases where the bug is difficult to eliminate.