iPhone or other users mobile phones with the support Bluetooth technology can safely purchase wireless headphones, since connecting them to the device will not be difficult. The principle of combining a smartphone with additional equipment wireless communication almost the same.
Depending on what operating system is installed on the device, access to settings may be different. Therefore, a user who decides to figure out how to connect headphones to a phone, in addition to this article, should use the smartphone manufacturer’s instructions. It shows step by step the process of accessing settings and the principle of changing phone settings in order to connect two devices wirelessly. Next, the connection method will be described using the example of an iPhone and a mobile phone with the Android operating system installed.
The instructions will be useful for users iPhones of different models that allow you to connect additional devices via wireless bluetooth connection. The connection principle is approximately the same for both products specially designed for the iPhone and for equipment popular among users of smartphones from other manufacturers.
Recommendations: How to charge wireless headphones 
How to connect headphones to TV 
, How to use wireless Bluetooth headphones 
Connection process
1. Turn on your wireless headphones. The included instructions should tell you how to turn on the device and start hardware detection mode for installation wireless connection. Typically, headsets have an indicator that lights up in different colors, depending on the mode you are currently in.
2. On your phone, enter the mode for changing operating parameters. That is, the user needs to find the “Settings” button on the screen, go to the menu, find in it “ Wireless network" and turn on Bluetooth.
3. After a short wait, the smartphone will find the connected equipment and, depending on its settings, will or will not prompt you to enter an access password. If the user has not changed the default settings, the wireless headphones will connect without asking for a password. The user will learn how to change or find out the default password from the instructions included with the headset.
4. By going to the Bluetooth settings settings, you can see all the devices connected via this type of wireless connection. The user should see connected wireless headphones in the list. If they are not there, then communication with the device has not been established, so you should check the setup sequence and compare it with the sequence specified in this manual.
5. After a successful connection, the user will see a special icon in the status bar of the smartphone indicating that wireless headphones are connected.
Owners of mobile phones running operating Android systems, sometimes they encounter problems connecting two devices wirelessly due to incorrectly set parameters. Problems can arise not only with combining two devices, but also with playing music.
Setup process
1. turn on the headset;
2. activate data transfer mode via Bluetooth on your phone;
3. enter the wireless settings and start the search mode for new devices;
4. connect the found device by clicking on its name in the list of found equipment;
5. enter the code, if required;
6. It is important that the sound goes not to the built-in speakers, but to the connected headphones; you need to go into the settings of the phone’s sound system and cancel the “Sound during a call” function;
7. By enabling the “Multimedia Sound” function, the user will be able to listen to music through wireless headphones.
Not all wireless headphone models support multimedia streaming. Such restrictions are introduced at the software level, so if desired, the user can easily bypass them by installing the appropriate software.
7 best wireless headphones for your phone, tablet or smartphone 
Instructions for setting up sound transmission via Bluetooth
1. Establish a wireless connection between the phone and headphones.
2. Download and install the program.
3. Launch the application and switch the broadcast of the audio stream to the headphones.
The disadvantage of using the software is high level energy consumption. The battery will drain quickly as wireless data transmission is always active. To save battery, you will have to regularly disable the application manually.
Problem solving
Usually, after updating the software, various malfunctions occur in the operation of connected devices. If, after updating the operating system, wireless headphones do not appear in the list of devices available for connection, try following the instructions below.
Instructions for troubleshooting software failures:
1. Reboot operating system using the corresponding button on the screen.
2. If that doesn't help, reset the system to return to factory settings. Before resetting, you should save all data that is important to the user. When you return to factory settings, all user data will be permanently deleted.
In the most different situations there is a need to connect 2 pairs of headphones to one source at once, this can be done different ways depending on whether you use wired or wireless headphones.
Simultaneously connect 2 pairs of wired headphones to a computer or any other sound source
It is very easy to connect 2 pairs of wired headphones to one source, just buy a tee wire, one end of it is connected to a sound source, for example, to a computer or TV, and headphones are connected to the other two sockets.
However, it must be taken into account that since the number of consumers has doubled, the power of the source must be sufficient to send an electrical signal of the required power. If you connect 2 pairs of headphones to a low-power source, such as a telephone, you may get poor quality sound because The power of the phone will not be enough to “pump” 2 pairs of headphones at once.
A cable that will help you connect 2 pairs of headphones to a computer, phone or TV
It's just a cable to which you can connect two pairs of headphones and watch movies together or listen to music.
Simultaneously connect 2 wireless headphones
With wireless headphones, everything is much more complicated.
If you are lucky, all headphones and audio source support the Multipoint function, then you can try connecting 2 pairs of wireless headphones to one source at once, in which case you do not need to worry about anything else.
However, most often the audio source does not support the Multipoint function, in this case there is only one solution and it is applicable only to the computer. You will not be able to connect 2 pairs of headphones to your phone or TV.
Simultaneously connect 2 wireless headphones to a computer using the Virtual Audio Cable program
You need to download to a computer running Windows program Virtual Audio Cable, install it and configure it.
The essence of the program is that it creates several virtual audio devices with which the built-in computer bluetooth module. It will duplicate the signal to each of the virtual devices, you can create more than 2 devices, however, this will not work well for all tasks.
The program works like this: It transmits part of the audio data to one device, then switches to next device and transfers the same data to it, then switches to the next one and so on until the list of virtual devices comes to an end. After which the program will return to the first device in the list and begin transmitting the next block of data to it. Each switch and each duplicate data transfer takes time, so if there are only 2 virtual devices for headphones, you will hardly feel the delay in data transfer. Latency can be expressed in the fact that if you are watching a movie, the sound will not be exactly synchronized with what is happening on the screen, it will be output with a slight delay, and the greater the delay the more virtual devices you install. But if you listen to music, the delay will not affect its perception and you can connect any number of wireless devices.
Your headset can connect in two modes: multipoint mode and single-point mode. Multipoint mode allows you to manage two connections at once. For example, if you connect the headset to two phones, you can receive calls from both phones without having to disconnect and reconnect the headset. Multipoint mode is enabled by default. If you stop using one of the two connected devices, you must manually switch to single-point mode.
In multipoint mode, the headset remembers both paired devices. You can easily reconnect previously paired devices by manually switching from single-point mode back to multipoint mode. The previously paired device will be detected automatically.
Manually pair your headset with a second device
- After you manually pair your headset with the first device, repeat the same steps for the other device.
Automatically pair your headset with a second device
- After the headset is automatically paired with the first device, repeat the same steps for the other device.
Switch between multipoint and singlepoint modes
- Make sure the headset is turned off.
- Place the headphones in your ears.
- To enter multipoint mode, turn on the headset by pressing and holding the Volume Up key. Once multipoint mode is activated, you will hear two beeps.
- To enter single-point mode, turn on the headset by pressing and holding the Volume Down key. Once single point mode is activated, you will hear one beep.
Surely every computer user knows how to connect a stereo headset to their device. But what should you do if you need to listen to music or a movie not in one pair of headphones, but in two? Depending on what type of connection your headset uses, there are several ways to simultaneously connect two headphones to one computer:
- use a splitter (for wired headsets);
- connection using Virtual Cable (for wireless headsets)
The simplest and in a cheap way Connecting two pairs of headphones means purchasing an ordinary audio splitter. You can purchase it at any large electrical store. If you have had difficulty searching and for some reason could not find a splitter on sale, order the device via the Internet.
As a rule, such an adapter has quite short wire, which imposes restrictions on computer users. The short distance over which connected headsets can be used is an obvious disadvantage of this method. For those who like to listen to media content over a long distance, the following synchronization option is suitable.
Virtual Cable
How to connect two pairs of wireless headphones simultaneously to one computer using Virtual Cable? To begin, download the specified program to your computer and install it following the included instructions. When the installation is complete, launch Virtual Cable and follow these steps.
- Launch the "vcctlpan" application and initialize any sound file played on your device.
- Change the device that plays sounds in the system to "Line Virtual". To do this, you need to open the “Hardware and Sound” tab in the control panel of your computer.
- After step 2 is completed, your device will stop playing sounds using the standard device and will redirect them to the “Line Virtual” splitter.
- Launch the “audiorepeater” application, which is located in the root folder of Virtual Cable, and connect the “Line Virtual” audio device and your Bluetooth headset.
- By repeating step 4, add other audio headsets to the Line Virtual audio device. Their number can reach 3-4.
Characteristic jumps will be evidence that all actions were performed correctly LED line on your monitor screen and the presence of sound in the connected headphones or speakers.
Disadvantages of wireless connection
Despite all the positive aspects, the Virtual Cable program has a number of significant disadvantages that can affect the amount of pleasure you get from listening to audio or video material together:
- there is a delay during playback;
- excess “noise” and other sound effects;
- broadcast resynchronization.
Resynchronization occurs due to the so-called “time division” mode: the sound is distributed across headsets in blocks of several milliseconds, which gives rise to this effect. How large quantity headphones you use, the stronger the resynchronization will be.
Despite the above disadvantages, this method will be an excellent solution for those who have a relatively powerful laptop or computer and plan to connect no more than two headsets at the same time. In this case, the “noise” in the headphones is smoothed out, and the delay of a few milliseconds ceases to affect the enjoyment of watching movies.
Wireless technologies have entered our lives quite a long time ago, replacing the not always convenient cable connections. It is difficult to overestimate the advantages of such a connection - this is freedom of action, quick switching between devices, and the ability to “hang” several gadgets on one adapter. Today we’ll talk about wireless headphones, or more precisely, how to connect them to a computer.
Majority modern models wireless headphones come with Bluetooth or a radio module included, and connecting them involves a number of simple manipulations. If the model is old or designed to work with built-in adapters, then you will have to perform a number of additional steps.
Option 1: Connection via supplied module
IN in this case We will use the adapter that comes with the headphones and can take the form of a box with a 3.5 mm mini jack plug or a small device with a USB connector.
- We connect the adapter to the computer and, if necessary, turn on the headphones. There should be an indicator on one of the cups indicating that the connection has occurred.
- Next, you need to programmatically connect the device to the system. To do this, go to the menu "Start" and start writing the word in the search bar "Bluetooth". Several links will appear in the window, including the one we need.
- After completing the actions it will open "Add Device Wizard". At this stage you need to enable pairing. Most often this is done by holding down the power button on the headphones for a few seconds. In your case it may be different - read the instructions for the gadget.
- We wait for the new device to appear in the list, select it and click "Further".
- Upon completion "Master" will inform you that the device has been successfully added to your computer, after which you can close it.
- Let's go to "Control Panel".
- Let's go to the applet "Devices and Printers".
- We find our headphones (by name), right-click on the icon and select the item "Bluetooth Operations".
- What happens next automatic search services needed for normal operation devices.
- After completing the search, click "Listen to music" and wait for the inscription to appear « Bluetooth connection installed".
- Ready. Now you can use headphones, including those with a built-in microphone.
Option 2: Connecting headphones without a module
This option implies the presence of a built-in adapter, which is observed on some motherboards or laptops. To check, just go to "Device Manager" V "Control Panels" and find the branch "Bluetooth". If it is not there, then there is no adapter.
If it is not there, then you will need to purchase a universal module in the store. It looks, as mentioned above, like a small device with a USB connector.
Usually a driver disc is included in the package. If it is not there, then perhaps additional software for connecting specific device not required. Otherwise, you will have to search for a driver on the network manually or automatically.
Manual mode – search for a driver on the manufacturer’s official website. Below is an example with a device from Asus.
Automatic search is carried out directly from "Device Manager".
Further actions will be exactly the same as in the case of a complete module.
Conclusion
Manufacturers of modern equipment are doing everything possible to make working with their products easier. Connecting Bluetooth headphones or a headset to a computer is a fairly simple operation and, after reading this article, will definitely not cause any difficulties even for an inexperienced user.