Connecting the monitor as a TV. Turning a Monitor into a TV

Modern TVs may well replace the computer display. But how is the computer to the TV?

We have collected various ways solutions to this common problem.

Connection selection

Attention will be given first best options regarding image quality, with which you can easily connect. After that, several additional methods will be given.

There is a possibility that the user will need to buy a cable in the store. Usually it is not very expensive, but to purchase various devices you can go to a radio specialty store or a retail chain that sells consumer electronics.

Please note that the presence of gold plating on expensive cables does not affect the quality of the displayed image.

So, here are a few options for connecting a computer to a TV:

• HDMI- ideal, because to work with it, you just need to connect the connectors. As a result, not only the sound, but also the image will be well transmitted. Only one problem is possible - sometimes it may not work from a laptop.
• VGA- one of the easiest to implement ways to connect television. To do this, you only need a cable that is sold complete with monitors. There is a possibility that the user has an unused device at home. If necessary, you can buy it in a specialized store.
• With cable from DVI things are the same - to work with it, you only need to buy an adapter and a cable.
• Alternatively, you can use a composite cable S-video. You can work with it both through a cable and through an adapter. It's just that he's not considered the best way connection, because the image may not be very clear. So such a connection does not apply if there is modern technology. The connection is the same as when working with consumer players.

Connecting with HDMI

Surely many users have heard about this connector. It is on all modern TVs.

An HDMI cable has the same connectors on both ends.

You can buy a cheap cable. That's only if the user plans to work in 3D mode, it is better to use latest version HDMI cable.

Look carefully, a similar socket is located on the video card near the monitor connection.

If there is no discrete graphics card, the socket will be located on the motherboard, that is, near the USB port. However, it will look the same.

With a laptop, everything is much simpler - it has the same HDMI socket. That's just it is on different sides, depending on the model with which the user works.

Sometimes the TV hangs on the wall and it is very difficult to insert the cable from behind. It is for this situation that a cable with plugs at right angles is sold.

Alternatively, buy a dedicated HDMI corner.

VIDEO: How to connect a computer to a TV via HDMI

How to connect a computer to a TV via HDMI

Connecting a TV to a computer via a VGA connector

Video Graphics Array is an interface designed to receive and transmit analog video signals. Sound transmission in this option of connecting a TV to a computer is completely absent.

Before connecting, make sure that both devices - both the computer and the TV - are equipped with VGA connectors and that a special cable is available.

To make such a connection, your computer must be equipped with an operating system of at least .

Connect the PC and the TV with a VGA cable in the off state, and then on the remote control remote control TV, press the SOURCE button (in some models it may be INPUT) and in the menu that appears on the screen, select as an external signal VGA(on some models - PC or RGB).

After that, confirm the selected changes by pressing the OK button.

Click right click mice by free space on the desktop and in the drop-down list, go to the menu.

AT this menu you are given the choice of using both a TV and a computer monitor, as well as setting the required resolution.

In addition, you can select the option to use multiple screens, in which the following options will be available to you:

• Duplicate Screens- a function that allows you to get the same image on the monitor and on the TV screen;
• Expand screens- will allow you to simultaneously watch a video on a TV screen, and, for example, print text on a computer;
• Display desktop 1 or 2- this function operates only one of the available screens - either a monitor or a TV.

In general, the process of such a connection is not difficult, however, it creates some inconvenience associated with the transmission, in this version, of sound.

It will have to be connected with a separate cable or use an external speaker system for this purpose.

S-video

Another option for connecting a TV to a computer is to connect using S-Video connectors.

This option is convenient because all TVs and computers (except very old ones) are equipped with an S-Video connector.

All that is required of you is to connect these devices with an S-Video - S-Video cable.

Before connecting, both the TV and the computer must be de-energized, after that you insert one end of the cable into the connector on the video card of the computer, which is a round black socket, and the other into the S-Video socket on the TV.

While downloading on a computer operating system the TV screen will blink - thereby showing that it has been detected external source signal.

The next step is to set up the video card. To do this, click on the free space on the desktop and in the menu " Properties» go to tab « Options» .

Then choose the item « Additionally» and in the window that opens opposite the name of the video card, activate the item « Clone» .

After application given parameter click on item « Display" and from the available list, select the name of the TV.

Then on the TV, search for the signal source and adjust the image.

Miracast

Miracast technology differs from DLNA in that such an option for displaying multimedia information from a TV to a PC simplifies the task of viewing not only recorded files stored on the gadget’s hard drive, but also played online on one of the built-in ones.

That's just the Miracast technology has the only drawback - it is very demanding on computer resources.

So it is supported only by individual computers, as well as tablets and laptops that have powerful hardware stuffing.

It is important to implement such modern technologies in the TV itself.

If the TV only optionally supports Miracast, then you will have to spend extra money on an adapter that easily connects to the HDMI port.

The wireless monitor technology is very simple - the displayed image is compressed using a special algorithm.

After that, it is mirrored via Wi-fi to a large TV display.

In this case, there is no need to connect the TV to one of the local networks using a router.

Thanks to the receivers, a separate mini-network is organized, which simplifies communication with a PC.

To successfully transfer the image, install the Wireless Display add-on on your computer and start broadcasting.

Make sure that the Miracast function is activated in the TV menu. This can be done in the settings if you enter the tab "Networks" and go to the sub-item Intel WiDi.

VIDEO: We connect the smartphone to the TV via Miracast

We connect the smartphone to the TV via Miracast

PC and Smart TV connection

As many of you probably know, home network can be created without using a router. AT this case will act as an access point.

This is done in several ways:

1. You can create a connection in one of the dedicated management consoles;
2. Alternatively, use ;
3. Take advantage third party programs, for example, Virtual Router Plus.

Note that a hallmark of most built-in Windows tools– Greater reliability and stability.

In addition, users no longer have to spend time searching for programs and installing them on Personal Computer. So the registry will not be too clogged.

This method is considered one of the simplest.

Logging in as an administrator, proceed to launch the command line. To cope with this Windows 8 task, use the key combination Win + X.

When the menu appears, select " Command line". In the seventh version of the operating system, you must press the key combination Windows + R in the window that opens, and also write cmd and press Enter.

Be sure to write the following command netsh wlan set

and after that press Enter .

Creation new network after that it will be completed and you can start its launch. To do this, write on the command line

hostednetwork

It is important to say what to create virtual network can only be done once.

However, after the module is reloaded, the user must enter a command to successfully start the Internet.

As a result, the user will only have to connect to the computer by performing the necessary steps that have already been done when working with the router.

Control TV from PC wireless network wi-fi is possible using the same programs.

Various add-ons are known, with the help of which it is much easier to control the TV using a smartphone.

In this case, the phone is used as a control.

So, this article shows the main ways to connect a computer to a TV.

It is very easy to cope with this task if you choose the appropriate option and follow the instructions given. Then the user will not have any difficulties with the connection.

VIDEO: We connect a TV with Smart TV to a computer (Wi.Fi - Lan) - using WINDOWS

We connect a TV with Smart TV to a computer (Wi.Fi - Lan) - using WINDOWS

Image Adjustment

If the image is blurry, you should open the system settings and find the section that is responsible for.

Here the user can set the required resolution to match the TV. If necessary, you can change the mode in which the video is displayed.

Most modern smart TVs can be connected to a PC wirelessly using local network wifi.

This helps to broadcast a variety of content - music, video, and so on.

If necessary, you can easily duplicate images downloaded from your computer to your TV.

As a result, the latter will turn into a high-quality analog of a wireless monitor. In addition, when working with wi-fi is not needed.

As for the LG device, you can use the service to activate this function. Smart Share

AllShare program

Between TV models from different manufacturers there is a big difference in the wireless connection settings.

Most devices are capable of establishing a connection in automatic mode. To work with others, you need to install an additional software to the connected .

So wording can be difficult. universal instruction suitable for all users.

If you need to connect a TV to a PC via, you can find the necessary information by reading the instructions, or by going to the manufacturer's official website.

There you can also find the answer to the question of what software is needed for this.

Combination of different outputs

Sometimes it happens that the equipment does not have the necessary connectors. It often happens that there is one port on the TV, and another on the computer.

How to be in that case? Very simple - you just need to unite which connectors will be used and purchase the right cable.

Alternatively, use special converters that simplify the connection of various ports.

You can use a VGA converter that accepts signals from VGA output gadget.

After that, the signals are converted for the most common S-Video for TVs.

When turning off, follow this order:

• TV and computer should be disconnected from the network;
• Don't forget to disconnect the antenna and peripherals;
• Connect cables if you plan to use adapters;
• It is important to connect the computer as well as the TV to the network.
• Next, you need to turn off the computer and wait for the system to fully boot;
• Only after that you can start turning on the TV.

By clicking the right mouse button, the user will see context menu in which to find the item "Screen resolution" . In order for the system to be able to connect the TV, you must press "Find" .

Selecting an item "Multiple Screens" , the user must configure the output of images:

• Screen duplication - in this case, the same information will appear on the TV as on the computer screen;
• When expanding the screens, the display of the computer and the TV will form a common work area;
• Half desktop display means that the image will be displayed either on a TV or on a computer.

Connection method	How to do
Connecting a TV using the VGA connector	With this connection option, a separate audio signal output is required.
Connecting with an S-Video connector	Pretty simple and not expensive way to connect. Due to the fact that most devices have an S-Video connector, it can be used as the main connection option.
Connecting a PC using HDMI	You can buy a cheap cable. But if the user plans to work in 3D mode, it is better to use the latest version of the HDMI cable. Next, you should find the HDMI jack, which is located on the back of the computer or TV.
Miracast Technology	Miracast technology differs from DLNA in that this option for displaying multimedia information from a TV to a PC simplifies the task of viewing not only recorded files stored on the gadget’s hard drive, but also played online on one of the built-in web browsers.
Connecting PC and Smart TV without a special router	Keep in mind that most built-in Windows tools are more reliable and stable. In addition, users no longer have to waste time searching for programs and installing them on a personal computer. So the registry will not be too clogged. This method is considered one of the simplest. Further, this issue will be considered in more detail.

Smart TVs are already so intelligent that they can be used instead of the usual devices for accessing the Internet. They act as a partial replacement for a laptop or can complement a phone, but still do not lose their usual functionality and continue to show movies on a large and convenient screen.

But remember that there are many ways to turn a TV into a monitor. Using the content in this way will be much more convenient, since the image will become larger, especially if you connect not a computer, but the same phone. Communication is carried out via Wi-Fi, which is very convenient, since you do not need to pull wires and cables through the entire apartment or move the computer itself closer. Often such manipulations are performed for a specific purpose. It consists in watching a movie on the big screen without going to the cinema. But this procedure cannot be performed if the TV does not have a built-in Wi-Fi adapter, or cannot receive a signal.

Connecting the TV as a second monitor via Wi-Fi

This method is the most popular, but it will require more than just availability of Wi-Fi. To broadcast a picture to a TV, it must be connected to a router that uses a laptop. This is a very important condition, but for some reason users forget about it, because communication between devices is not being established. But there are exceptions regarding TVs that support the function. WiFi Direct that are being broadcast to the screen via a wireless network. It is not difficult to connect, you just need to have access to the Internet and the desire to understand the instructions. But you will have to conjure over the laptop screen so that another device is given the right to share all folders and other information. As a rule, it helps to install the “Home” item on the network, and add a TV to the home devices. To files that will open even without general setting can include a folder with videos, music, images and documents. But if you need to open full access to all files, the instruction is as follows:

• Select a folder by displaying it;
• Right-click on it and select "Properties" from the list;
• Go to the "Access" tab;
• Install "Sharing".

But it's long. To use the TV as a wireless monitor, you can use more simple method opening folders.

• Open "Windows Explorer";
• Item "Network";
• Deactivate the item "Network discovery and general access files" by following the simple instructions.

If everything is set up, then it will take a couple of seconds, and if not, you will have to use more detailed instruction. Here is how to connect a wireless monitor:

• When DLNA is enabled, you need to open the TV menu item, which controls the broadcast of computer content to the TV.
• Each device has its own connection. In particular, the Sony Bravia uses the Home button;
• Then the user needs to select the section - Movies, Music or Pictures to see the content they are looking for already on a large TV.

As for LG TVs, the instructions are slightly different for them, since you need to go to SmartShare, where the content is also located shared folders. In addition, it often happens that you cannot play files on a TV. This applies to films whose format is not suitable for such a procedure. If broadcasting to a TV is difficult, then you can try to do a little trick - rename files from MKV to AVI on your computer. As a rule, this is enough.

Using the TV as a wireless monitor via Miracast and WiDi

You can use your TV as a monitor using WiDi. Above, the conversation was about how to transfer pictures, videos and other limited number of files to the screen, but you still cannot use it as a full-fledged monitor. But if you apply the connection described below, the TV will turn into a full-fledged second monitor that will show everything that the user can do on desktop computer. To connect a TV as a monitor, two popular technologies are used:

• Miracast;
• Intel WiFi.

A wireless TV monitor is cool and modern, especially when it is also a Smart TV. That is, the functional potential of technology has grown significantly compared to conventional TVs, although they can also be used as a monitor. To TV simple type Of course, you need to connect other devices. But let's look at using WiDi and Miracast for wireless broadcasting.
This connection does not require a router, including one that works via WiFi technology Direct.

• If the broadcast will be conducted from a computer on which Intel processor, at least the third generation, or it uses an Intel HD Graphics chip. Making a connection via wireless communication might be a problem. Sometimes devices won't connect. This is due to Intel WiDi support on Windows 7 and 8.1. To fix this, you will need to install the Intel Wireless Display, but only if you go to the official Intel website;
• If the laptop has Windows version 8.1, and the TV is equipped with a Wi-Fi adapter, then the connection via Miracast will be successful. That's just self-installation Windows 8.1 on a PC can be a problem as the bundle is likely incomplete;
• A prerequisite is to connect the TV to the network. But it is important that the model supports the technologies in question. If your device cannot connect to the PC, then you need to buy a Miracast adapter. However, most devices already have this add-on, because manufacturers build it on their own. And if you have to make a purchase, you can try installing Miracast during the flashing process.

Connect your TV as a monitor using Miracast

Connecting is a fairly simple procedure, so anyone who is at least approximately versed in the technical nuances can do it on their own. So the connection looks like this:

1. Before connecting the TV to the computer and using it as a monitor, you need to check the settings. In particular, this applies to Miracast or WiDi, whose support lies in correct connection devices. It works by default, but if the settings are messed up, it's not surprising that the devices won't be able to work together. But there are times when there is no such setting at all. In such a situation, a standard Wi-Fi module will help. For example Samsung TVs this function can be found in the network settings, in the "Screen mirroring" section.
2. To enable WiDi, you will need to run the Intel Wireless Display program. It is she who finds the monitor to which you want to connect. But in order to safely carry out this procedure, you will need to enter a security code. You need to enter it in a special field displayed on the TV screen.
3. In turn, on the computer you need to carry out the following manipulations:

• On the right in Windows 8.1 you need to find Charms;
• Next, you need to select the "Devices" section;
• Then go to the "Projector" or the item "Transfer to screen";
• Select "Add a wireless display".

What to do if items are not displayed

If you want to use the TV, but do not know how to use this method, since the necessary items are not displayed, it is most likely due to differences in the device models. Perhaps the instructions for a specific TV will help, which can be downloaded directly to your phone so as not to look for documents. An update can also be of great help. WiFi drivers adapter. How exactly to do this, you can read on the official Microsoft website. In addition, users complain that it is more difficult to broadcast content from a laptop to a TV than from a computer. The problem might be:

• In WiDi;
• In Miracast;
• There is no Internet connection;
• Faulty router;
• Incorrect settings on the TV;
• If a telephone is used, the connection settings may also be violated.

Using as a regular TV monitor

As a rule, Smart TVs are not the cheapest devices, so many users want to make a standard TV a laptop monitor. As practice shows, it is not difficult to connect even these devices. If the TV has an HDMI input, then you can try to connect. There are good chances that it will be successful. But additional devices will be required, in particular, an HDMI WiFi adapter for the TV. Thus, you can forget about most of the wires that used to entangle the TV and computer.
Which adapter is suitable for the TV? Here are some good options:

• Google Chromecast. This Wi-Fi adapter is more suitable for LG, although it can be used on other devices;
• android mini pc. Suitable for those devices that work on the basis of Android. Therefore, phones and tablets are perfectly connected to TVs, allowing you to control them with WiFi through Android. The app you use works with all TVs;
• Intel Compute Stick. Another new product from Intel, which is almost a miniature computer. It can be connected to the input on the TV, and the equipment will start working in perfect mode.

In addition, the options described are not the only way to connect a TV to a computer. Someone first thought - I use the Internet for this, and not hundreds of cables, wires. The idea turned out to be great. But, most importantly, a high-speed connection is provided. Without the Internet TV will not be able to work. Connection advantages:

• No wires;
• The connection is fast and provides access to the entire computer file library;
• There is access to the files of other devices, such as smartphones.

Note.

Technology, especially computer technology, tends to become obsolete, and in recent years this has been happening at a very rapid pace. Old monitors may no longer be needed by anyone, and it will be very problematic to sell them. You can breathe a second life into an elderly LCD display by making it conventional TV for domestic use, such as in the kitchen. In this article, we'll talk about how to turn a computer monitor into a TV.

In order to solve the task, we do not need a computer, but we will have to purchase some hardware. This is, first of all, a TV tuner or set-top box, as well as a set of cables for connecting the antenna. The antenna itself is also needed, but only if cable TV is not used.

Tuner selection

When choosing such devices, you need to pay attention to the set of ports for connecting a monitor and acoustics. On the market you can find tuners with VGA, HDMI and DVI connectors. If the "monique" is not equipped with its own speakers, then you will also need a line output for headphones or speakers. Please note that audio can only be transmitted via HDMI connection.

Connection

The configuration of the tuner, monitor and speaker system is quite easy to assemble.

Conclusion

As you can see, making a TV out of an old Monica is quite easy, you just need to find a suitable tuner in stores. Be careful when choosing a device, as not all of them are suitable for this purpose.

Watching a movie on the big screen, having gathered in the evening with the whole family, is quite a good family leisure, especially in the cold season. But here's the problem, how to properly connect the monitor to the TV? There are several solutions to this problem, and they depend on the equipment that you have available.

Connection Features

When connecting cables according to the scheme: computer - monitor - TV, problems usually begin with image output, sound, signal, etc. The scheme can only work if the monitor has motherboard, integrated graphics chip and sound card. And such equipment is no longer owned by a display, but by a laptop or monoblock. In any case, there is no way without a computer, and we return to the computer-monitor and computer-TV scheme.

But you can connect both the display and the TV to the computer in many ways, while the two displays can work in different modes: both duplicate images and separate the visible and work area.

Using a TV as a monitor for a computer is the easiest option where you need a special cable or Wi-Fi adapter.

But, and if you need to connect a monitor to a TV without a computer, it all depends on the display and the board installed in it. Perhaps it is equipped with a decoder for receiving an image. If not, then you should change the board - and this pleasure can cost more than buying a small TV.

For ways to connect a PC and TV, see the following video:

Wired connection of the TV to the computer

You can connect a PC and a TV using cables with the same connectors or adapters.

These cables (male-male) include:

• Display Port is a signal interface standard for digital screens (supports 8K).
• HDMI is a high definition multimedia interface (supports 8K).
• DVI - an outdated interface for transmitting video images to LCD monitors, projectors (maximum resolution 1920 × 1200 pixels)
• VGA is an outdated interface for connecting screens on electro-ray tubes (max resolution 1280 × 1024 pixels).

In addition, you can use adapters (the first connector is connected to the video card, the second to the TV):

• HDMI-DVI;
• Display Port - HDMI;
• HDMI - Display Port;
• DisplayPort - DVI;
• DVI-VGA.

If you are connecting a PC display and a TV at the same time, connect to only one graphics card. Do not plug devices that are powered on to avoid burning out the ports.

AT Windows settings to select a mode:

1. Open the command Win + Iparameters and go to "System" - "Display".

1. Scroll down to the "Multiple Displays" section and select the option you want.

Wireless connection of a PC to a TV

In this case, the monitor is already connected to the PC via a cable. To connect it to the TV "over the air", the following conditions must be met:

1. The computer has a Wi-Fi adapter installed.
2. The TV was SMART or connected to a TV-box.

Miracast technology is supported by Windows, Android, Tizen, webOS and other systems, so connecting two devices via Wi-Fi is very simple. On a Windows computer:

1. Press Win+P and select "Connect to a wireless display".
2. Device search will start.
3. At this time, on the TV, start a similar search through the function
4. Select the found device and wait for the connection to complete.

Ready. Using Miracast technology, the contents of the monitor screen are projected onto the TV screen.

Creating a TV from a monitor

There is an excellent video on the topic of the section:

You can create a full-fledged TV from the display using:

1. Smart set-top boxes (TV-box) - connection via Ethernet or Wi-Fi, use of IPTV.

1. Tuner for connecting to the computer motherboard (installed in system unit PC).

The first and fourth options are two independent devices connected directly to the monitor. The first is through a twisted-pair network cable, the second is through a coaxial television cable.

Not all displays have built-in speakers, so you will need to connect audio equipment to devices through a special audio output or mini-jack. If there are speakers in the monitor, and you connected the devices via HDMI, the sound will be played through them.

The second and third are additional devices that work only with a connection to a computer.

Conclusion

You can connect the monitor to the TV through a computer, or if the display has its own motherboard. If you need to connect two displays, this can be done using cables or adapters. And if you need to build a TV out of a monitor, TV tuners or smart Android set-top boxes will help.

I have no doubt that at least once you thought about using a conventional large-diagonal TV instead of a monitor. At first glance, the thought is reasonable - this is saving space in the room, less purchase costs, and the size, logically, should please. Approximately such reasoning was spinning in my head when Acer was looking for something newer to replace the old 24-ke. The study of prices showed that the 27 "LG monitor entry level costs almost the same as the 32-inch .

But in order not to buy too much, for a start I went to my friends and borrowed this TV from them, for tests for the day. At the first moment, after the usual 24", such a huge screen simply plunged into admiration. This is how the TV looks on the table.

Connecting a TV to a computer is very easy, especially if the video card is equipped with an HDMI connector, then you only need to buy HDMI to HDMI cable available at any computer store.

Otherwise, you will have to choose another cable option or an adapter for the desired connector. And keep in mind, you need HDMI, it is unlikely that anyone will now and in the future equip panels with obsolete connectors of other types.

Watching movies has now become a real pleasure. good speakers and enough big screen TVs make you feel like you're in a movie theater. And of course you can read the text from the screen, though being a few meters away from it. Well, enough about the good. Now come the cons: Since we usually work at the table, and not from the couch, it turned out to be difficult to get used to this screen size. You have to turn your head to look from one corner to another. For surfing the Internet, a screen of this size is not very convenient. Most sites are optimized for standard resolution and look strange on a large monitor. When working, it is required to keep all the contents of the screen simultaneously in view. But with 32" this will not work, let alone wider screens.

Farther. TVs with IPS matrix have too high contrast - this is true when watching movies and TV shows. It adds more "juiciness" to colors, more brightness and contrast, and if you look back on an armchair or sofa two or three meters from the screen, in principle, everything is fine. But sitting close, and even more so working with color or text, is not very convenient. A small distance affects, and with a large diagonal, all pixels are visible to the naked eye. Such a noticeable network.

next moment: real LED monitors instead of liquid crystals have organic light-emitting diodes of different colors, and what is now called led monitors, these are ordinary old monitors with a different matrix backlight, it just used to be illuminated by fluorescent tubes, and now LEDs.

But the most annoying, which completely crosses out the ability to work on TV, as on a monitor - input lag, a kind of indicator of how quickly the screen itself displays a change in positions, such as a cursor. This is not the response time of the matrix pixels, do not confuse these two characteristics. This thing looks like this: you moved the mouse, and the cursor only moves after a while, with a delay. It feels like the cursor is floating in the jelly. The thing is very uncomfortable.

conclusions

For text, the Internet, and indeed any work at the table, for a resolution of 1920x1080, the maximum comfortable screen size will be 27-30". It is out of the question to use modern (2015) TVs as a monitor for work, not entertainment - games, video The very technology of making a TV involves using it a few meters from the viewer, and the monitor - almost close. And in the coming years, of course, it will be possible to connect a computer to TV, but only for a couple of days, until you buy a normal monitor.

Discuss the article IS IT POSSIBLE TO USE A TV INSTEAD OF A MONITOR