Recuva is designed for recovery deleted files , has a nice appearance, a simple and ascetic interface, immediately after installation it offered data recovery

On my hospital phone it’s 2 windows 7 one for experiments :), so after an unsuccessful experiment I deleted system files(standard system file recovery did not help), and because of this the system did not function properly, I decided to try anyway, although to be honest I did not expect success, since the program is free, and it is intended for file recovery of a different plan, it’s unlikely that anything will work out, I thought, but still continued to follow the instructions of this program

About system files as you can see, nothing is said, but no, no, I continued anyway, I’m not losing anything, although it’s possible that there were some interesting photos, or the video might be restored. I chose drive C on which the system is located, as you can see in the screenshot below, it’s possible recover files from flash drive, but that’s not what we’re talking about...

As you can see, I didn’t bother too much and started with data recovery The program started searching for deleted files on the entire disk

The time I took was about 15 minutes, during which time the program had to scan the disk and find deleted files, upon completion of the scanning process, a flashing icon reminded me of the completed task and I opened the program

As you can see, there are a lot of files - there were lost, these files were marked in red, that’s exactly what I needed to restore, by highlighting them all, I clicked on “ recover data“I waited until it was completed and decided to switch to the “damaged” system to see if it would function normally or not... No, everything remained the same, only photos and unnecessary videos and some other documents were restored, apparently I erased the system specifically)))

Conclusion: You can try file recovery from a flash drive, but not system data.

Convenient free file recovery program(photos, videos, music), as well as documents and archives from flash drives for phones and cameras and other gadgets that use storage devices, quickly, simply, conveniently, although not everything can be restored, it is advisable to use the program without delay, if you have deleted it, formatted it a thousand times this program, and others are unlikely to help. And know that It is better to restore files immediately and not after half a year :)

Another program to recover deleted files

R.saver Free data recovery software
This program is also free and easy to use, to learn more how to recover deleted files with help R.saver I suggest you watch a video dedicated to this.

7 Data Android Recovery is on this moment the most popular program for data recovery on Android smartphones. However, it does not work correctly for all users. In some cases, the software is completely . What to do if the program does not want to work properly? In this guide we will try to figure out why 7 Data Android Recovery I can’t see my phone and how can I fix this problem.

Causes of the problem and their solution

The program may not detect the smartphone or Tablet PC for one of several reasons. It all depends on the type of device, the hardware used to connect it, as well as the operating system settings.

Below is a list of reasons why connection problems may occur and how to solve them:

1. USB debugging disabled

This is probably the most common problem. It's easy to solve, you just need to do it. To do this, you need to go to the settings of your Android phone and find the “For Developers” section there, it will have the “USB Debugging” item.



2. The smartphone is not put into standby mode

No matter how strange it may sound, in some cases, turning on the phone lock helps solve the problem with detection.

3. Drivers for connecting your smartphone are not updated

Outdated or uninstalled drivers for device identification in Windows system, may cause incorrect operation 7 Data Android Recovery programs. To try to fix the situation, download the latest version of drivers from the website of the smartphone/tablet manufacturer or update it yourself through the device manager.

4. Incorrect operation of the computer's USB driver

Check if all drivers on the system are updated to latest version. It often happens that to use some USB connectors on motherboard installation of an additional driver is required (for example, this often happens if the laptop uses the 3.0 standard).



5. Incorrect connection mode

Please note that the smartphone must be connected in storage mode, and not in modem or charging mode. In these modes, the program will not be able to see the SD card.



6. The phone is not rooted

Even if debug mode is activated and the disk drive, restoration is impossible without obtaining root rights (since by default the user cannot make changes to file system). You can find out more about how to obtain these rights on your device on specialized forums.

In some cases, there may be problems with the USB cable, due to which any file transfer operations, as well as working with the device through programs on a PC, become impossible. The phone simply will not be visible to your PC. The only thing that will help is replacing the cable with a new one or connecting a memory card through a card reader.

Conclusion

In case everything possible reasons the problems described above are excluded, but the program still does not want to detect the device, perhaps it is not supported. In this case, you can try using more old version program or one of its analogues.

There are several ways to recover lost information from your phone. Such as:

• backup copy;
• Google service help;
• resuscitation programs.

In this article, we will look at each of them in detail and help users in a seemingly hopeless situation.

Creating backup copy you can protect yourself from loss important information. This can be done using some utilities;

• 7-Data Android Recovery
• Titanium Backup
• Super Backup SMS & Contacts
• Helium
• Backup Your Mobile
• Organizer Mobile
• Suncit

Recovery mode

Standard environment for resuscitation of any lost data, the simplest way to create a copy of the system. Instructions for Recovery mode.

1. Turn off your smartphone
2. Press the power and volume buttons at the same time and hold them until the recovery starts.
3. After entering Recovery mode, open the backup and restore tab.
4. In the list that appears, click Reserver copying

Root rights and ways to obtain them

Most applications require root (root) access to the system (super user). This happens because when performing the operation Reserve copy the software must perform low-level interaction with the hardware. This may also involve interaction with the smartphone hardware (storage unit).

To protect the device from receiving any malicious attacks the developers have established some rules. For example, most smartphones follow the MTP protocol. According to it, users cannot interact with the device at an advanced level. Super user rights give full access to the system. You can get them using the utilities:

• Framaroot
• VROOT
• Root master
• DingDoon

Fortunately, there are many utilities that can bring back deleted documents without gaining root access. The best are considered:

• Dumpster
• DoctorFone

Doctor Von

This utility will return any information missing from your personal device.
Instructions for using the Doctor Fon program.

• After launching the application, connect your phone to your PC.
  Enable USB Debugging (optional)
  1) for version 2.3: enter “settings”< «приложения» < далее «Разработка» < проверьте « отладка USB»
  2) for version 3.0 to 4.1: enter "settings"< «параметры разработчика» < проверить « отладка USB»
  3) for version 4.2 e: enter “settings”< «номер сборки» два раза, пока не получите заметку «вы находитесь в режиме разработчика» < обратно в «Настройки» < «параметры разработчика» < « отладка USB
  Note: If the program does not scan anything for a long time after clicking “allow”, check your device again. Sometimes you need to click “allow” several times until it appears again, then the program will start scanning on its own.
• Select files. To save time, after clicking “next”, select the necessary photos, videos, messages, contacts. Choose standard or advanced mode. The process will take a few minutes. Once the scan is complete, you can view the files that can be returned. After previewing, mark the ones you want to save and click "save".

Resuscitation if your phone is damaged

If you have important documents on your smartphone that you want to access urgently, and you cannot do this because the screen is broken and the smartphone does not turn on, ADB DATA Recovery tool successfully copes with this task. To do this you need:

• ADB and Fastboot must be installed on PC
• USB debugging and developer options.

Additionally, you must have at least 50% battery or more on your device.

Instructions for ADB Data Recovery Tool

1. Completely turn off the damaged device and reboot it in fastboot mode by pressing the Power+Volume Down button for 4-5 seconds.
2. After this, you will need to open the folder where you installed ADB and Fastboot as mentioned in the prerequisites section and open a window command line inside it.
3. Now make sure that the device is connected to the PC correctly. In order to check this, you must enter the following command: fastboot devises fastboot devices [If you see an alphanumeric code on the next line after this command, you can be sure that your phone is connected to the PC]
4. Now enter the recovery mode by turning off the device again and pressing the Power + Volume Up button for 4-5 seconds and you will see the recovery screen on the device.
5. After this, you will need to go to the ADB tool that you have downloaded on your PC and open the application.

You will see four system recovery options that we have listed.

• (OUT)….. OUTPUT LOCATION (default=C:\\RecoveredData)
• (ADB)….. SET LOCATION (def=C: \\platform-tools)
• (DEV)….. SET DEVICE TO USE (USB devise or Emulator)
• (RUN)…..RUN

Now, if you need to change the default output location, you need to enter 1 and continue. You also need to set the location by copying the installation folder path on your device and pasting it into the application. To do this, you need to enter 2, click enter and paste the link to the folder.

You will get the option to retrieve data from the SD card through input 1. Moreover, you can also choose between other options such as retrieving data from DCIM, Media, Music as well as other folders. Save all the data that is available on the SD card. After this step, all information will be pulled through ADB and will be available on the PC for further use.

Using Google

Google Drive is one of the best solutions for cloud storage, available on most platforms. You can use it to synchronize between Google Drive and your device, and any changes made on the server are associated local folder, are reflected in real time.

After Google installations Drive utility will automatically use its account. It will then ask you to grant special permissions to access the data on the drive and perform preliminary setup.

Select one of the folders in your phone memory that you want to link to Google cloud storage for synchronization. Create a new one, if you don’t already have one selected, link it to the Google Drive storage in the next step.

Reanimation programs

Returning data via iReparo

iReparo - software for returning deleted information, successfully resuscitates data from any gadget. The user only needs to connect his device to the computer using a cable, then he needs to launch the utility. iReparo will scan the data on internal memory And external SD card connected device. Once the scan is completed, users can view the lost files and selectively resuscitate them.

Instructions for using iReparo

1. Install iReparo on PC
2. Launch the program.
3. Select the files you want to return.
4. Connect android to PC
5. Follow the onscreen instructions to program and enable debugging.
6. When the phone is recognized, press the Start button to scan
7. Move your mouse and click on each category to view the scan result. Lost and orphaned files are marked in a different color.
8. Mark the information that needs to be restored, then click the “save” button.

Resuscitation via Recuva

Recuva is one of the best resuscitation programs. Software is easy to use and can return almost any important photos, music, pictures, just connect your gadget to your computer.

Step-by-step guide to using Recuva.

1. Run the utility, then check necessary files. Next Next".
2. In the next window, select the disk with the missing data and click “Start”. If it is not visible, you need to click the “refresh” icon.
3. After scanning is completed, mark what you want to save from the results page, and then click on “ Reset", Save them to a memory card or any other medium.

FoneLab

Solves many problems Android systems, such as stuck in startup mode, random formatting, black screen and others. With its help, you can see and view the data that you want to revive. The process is very fast, all results are saved to the computer. The utility itself will open the storage, where it will automatically save the information.

EaseUS Mobisaver

Allows you to easily find and view deleted or lost documents (music, games, pictures, etc. After connecting your tablet or other gadget to your personal PC, the application will start scanning and return all your lost photos, videos, images, contacts.

7-Data Android Recovery

The utility needed to recover information from a smartphone to operating system android. If personal documents were accidentally lost, the application will easily help you solve this problem. If the program does not see the phone, it means that your device model is not supported.

Conclusion

• Trust only proven and licensed applications
• Always save your contacts in Google storage, use cloud synchronization
• Be sure to store your backup copy on a separate medium to avoid future loss of documents

Video

Recuva - very useful application, with which you can recover files and folders that have been permanently deleted.

If you accidentally formatted a flash drive, or you needed deleted files after emptying the recycle bin, do not despair - Recuva will help you return everything to its place. The program has high functionality and ease of searching for missing data. Let's figure out how to use this program.

1. The first step is to go to the developer’s website and download the program. You can choose both free and commercial versions. To recover data from a flash drive, a free one will be enough.

2. Install the program following the installer's prompts.

3. Open the program and start using it.

How to recover deleted files using Recuva

When launched, Recuva gives the user the ability to configure search options for the required data.

1. In the first window, select the data type, also known as the format - images, videos, music, archives, Email, Word documents and Excel or files of all types at once. Click on “Next”

2. In the next window, you can select the location of the files - on a memory card or other removable media, in documents, the trash can, or a specific location on the disk. If you don't know where to look for the file, select "I'm not sure."

3. Recuva is now ready to search. Before starting it, you can activate the advanced search function, but this will take more time. It is recommended to use this function in cases where the search did not produce results. Click “Start”.

4. Before us is a list of found data. A green circle next to the name means that the file is ready to be restored, a yellow circle means that the file is damaged, and a red circle means that the file cannot be restored. Place a checkmark next to the desired file and click “Recover”.

5. Select the folder on your hard drive where you want to save the data.

The Recuva program from Piriform is one of the worthy representatives of tools for recovering deleted data (for example, after formatting or damage removable drives). By the way, the Piriform company made another one good program– Speccy, we have her.

You can download Recuva completely free of charge on the official website. There is also a paid version (as of February 2018, its cost is 800 rubles), but it does not provide any serious advantages. When installing, do not forget to select Russian language and refuse to install CCleaner:

DiskDigger - review and instructions for recovering deleted files

How to transfer from iPhone to iPhone - instructions with pictures

The SD card is damaged - recovery procedure

How to recover data using Recuva

After starting the program, a wizard will automatically launch to help you recover lost data. You can specify the type of files you want to recover, this will speed up the search (you can select types: images, videos, documents, and so on):

Be sure to specify the path to the drive you want to search on, because by default Recuva will search for files wherever possible. This will take a lot of time, and it will be difficult to find anything in the huge number of results.

If the files were simply deleted, Recuva will easily find them and offer to restore them:

If your drive has been formatted, and in other difficult cases, Recuva will offer you an in-depth analysis - agree. It can take quite a long time, depending on the disk size:

After finishing the search, click the “Go to advanced mode” button, you will see something like this:

There can be quite a lot of elements, because Recuva will also find long-deleted files and folders. You can sort files by type, size, or location. All that remains is to select the necessary files and click the “Recover...” button.