Dust on the iPhone camera. Where and how to remove

Some time after purchasing a smartphone, a problem is often discovered: in pictures taken with using iPhone, in different frames there is a spot inexplicably present in the same place. Taking a closer look at the small iPhone lens, you can recognize a speck of dust under its glass. Removing it will not be difficult; just tap the body with your finger.

After some time, there will be so much dust that taking pictures will become simply unrealistic. In this case, tapping, unfortunately, is no longer sufficient. A huge amount of microscopic dust has accumulated inside, which cannot be removed so easily.

There is dust in the iPhone 5 camera - it won't be difficult to remove it

Bayon specialists want to tell smartphone owners about operating system iOS, where the dust inside their devices comes from and how to remove it from there. None of the available tools that you find at home are suitable for these purposes, and the vacuum cleaner pipe is completely out of the question.
Remember that if you decide to open the iPhone case yourself, the device will be removed from warranty. Here you will have to make a choice in favor of one of two options: solve the problem yourself or have your smartphone repaired and cleaned at a service center.

Apple products cannot be called completely sealed. Little changes in their design from model to model. Therefore, it is only a matter of time before your smartphone becomes clogged from the inside.

How to disassemble iPhone 5

First you need to unscrew the bolts. Yes, exactly those bolts that are located next to the Lightning port.

As you have already noticed, standard screwdrivers will not fit such bolts. Moreover, they are very small, so you need to be careful not to lose them. To remove the smartphone case, you need to purchase a special tool: a screwdriver with the Pentalobe standard, or rather, its special variety TS1

When detaching the display from the case, the main thing is not to overdo it. Improperly calculated force may cause the glass to detach from the display module. After this, it will be impossible to use the smartphone.

After the screen module is lifted, you will see an unpleasant picture: a huge amount of dust has accumulated in the case. Even if it has not yet penetrated under the glass above the camera, it is only a matter of time, know that it is still already in the body of your device.

If you remove from motherboard electromagnetic protection, you will see how much dust has collected in your iPhone. Basically, thanks to electromagnetic protection, dust does not penetrate so much into particularly important parts of the device.

The camera, unfortunately, is not a place where dust does not penetrate. Experts claim that the problem of dust appearing in the case could have been caused by the smartphone falling. As a result of the impact, the seal around the display is broken. This is the reason the iPhone gets dirty from the inside, but you can clean it yourself.

Be careful when disassembling the smartphone; for convenience, all bolts and parts of the smartphone must be placed in some niche. Losing any part will cost you a lot. Be careful not to damage the cables, there are a lot of them in the iPhone 5.

You can clean your iPhone 5 from dust using an air flow source. It is necessary to adjust the air flow so that it blows away dust, but is not too strong. In this way, dust is removed from all surfaces of the device. Not a single part is damaged. This action will take no more than a minute, and the smartphone will again acquire a presentable appearance.

However, this is not the end of cleaning your smartphone from dust. the main task- remove dust from the camera, but we haven’t done that yet.

This is where cotton swabs come in handy. Use them to clean the camera optics from dirt. You can also wipe the inside of the display with a cotton swab.

You need to reassemble the iPhone in reverse order. The main thing is not to rush and not to worry, and then everything will work out.

A short video to help:

Well, in order to maximize the life of your smartphone, minimize damage, scratches, dust and dirt, use protective covers, plugs, cases and bumpers.

The Bayon online store offers a huge number of cases and accessories for mobile phones for every taste and with free shipping!

Dust gradually accumulates on the camera of the iPhone 5, like other smartphones, as a result of which the quality of photos deteriorates. Therefore, the question arises: how to clean the camera on iPhone 5? The procedure is not the most complicated, but quite painstaking. The main difficulty lies in the need complete disassembly devices. Without the appropriate experience and suitable tools, it is better not to do this yourself, but to entrust the work to professionals. The design of the iPhone 5 involves a lot of small parts inside the device. Moreover, if disassembled carelessly, there is a high risk of damage to the display module cables and the screen itself.

Typically, the need to clean the camera occurs quite rarely, especially if the gadget is in a case and used carefully.

However, small dust particles often end up inside the device. They can accumulate in absolutely different places, including the glass of the camera. After a certain time, they will become quite noticeable, including in the quality of the images. Typically, signs of contamination include the appearance of extra elements, spots, purple dots and other defects in photographs. This indicates the need for cleaning, and preferably not at home, since the situation can only worsen.

How to clean the camera on iPhone 5

There is little you can do on your own. Naturally, a vacuum cleaner and other improvised means cannot eliminate the problem. The case is tightly closed, although not airtight, so it is impossible to remove dust in any way without disassembling it. You can disassemble the gadget at home. To do this, you will need a set of screwdrivers, a plastic spatula or pick, tweezers and a silicone suction cup. But, due to the complexity of the design, without the appropriate skills, you can disassemble the gadget without damaging it. internal components, will not work. The slightest damage can cause serious problems, which will lead to the need for expensive repairs.

If you are able to disassemble the smartphone yourself, you can clean it yourself. Carefully disassemble the device, and once you reach the camera glass, clean it thoroughly with a lint-free cloth. You can also use simple tape to remove dust particles. It is recommended to work in a clean room where there is practically no dust, otherwise the glass may become even more dirty. You can check the quality of cleaning in the light. At the end of the procedure, reassemble the smartphone in reverse order.

Sometimes image defects can be caused by a breakdown of the camera itself, which requires its replacement. You can buy a new camera module from the GSM-Forsage company. The company's assortment also includes all kinds of other spare parts for the iPhone, as well as any phones, smartphones, tablets from other manufacturers.

Instructions for external and internal cleaning of the camera on the iPhone.

Navigation

Today everyone modern phone, a smartphone or tablet is equipped with a video camera so that a person can capture or videotape any episode of his life at any time. Most of the current devices are equipped with two cameras: rear (on the back of the case) and front (in front above the display).

Many new smartphone models are capable of capturing excellent photos and videos with image quality comparable to professional digital cameras. This is especially true for the popular line of Apple smartphones. iPhone.

However, at some point, the user of a device with an excellent camera may notice that the pictures begin to turn out fuzzy or completely blurry. In most cases, this problem is explained by dust on the lens or other type of contamination. This is facilitated by carrying a smartphone in pockets, bags, backpacks, and simply untidy handling of it.

In our article we will tell you how to clean the front and rear cameras on smartphones iPhone and what means are recommended to do this.

How to clean the back/front camera on iPhone?

• The usual process of cleaning the camera without disassembling the smartphone is no more difficult than the process of cleaning the display from fingerprints. The most important thing in this matter is to choose the appropriate cleaning materials. An alcohol hand wipe is perfect for this purpose, but it may simply not be in your arsenal at the right time.
• In this case, it can be replaced by an ordinary clean napkin or any other piece of soft cloth. The most important rule is not to use wet, well-wrung out rags or sponges. It is also important that the fabric is free of lint, which can remain on the lens and spoil the quality of the pictures.

• Another convenient tool for cleaning your camera from dust and other contaminants are cotton swabs, which are filled with cosmetic bags and handbags of almost all representatives of the fair sex. A dry stick will not bring the desired result, so you must first moisten it with some liquid, like cologne or glass cleaner, and then squeeze it out thoroughly.
• If the stick is too wet, streaks may remain on the camera lens or, even worse, drops of liquid will seep under the lens and interfere with the operation of your device.

IMPORTANT: Refrain from cleaning the camera with any hard types of cloth, toilet paper and all other dry types of materials. A hard surface or invisible objects contained on it can cause irreparable damage to the protective glass of the camera, leaving scratches on it.

How to clean the rear/front camera on an iPhone: disassembling the device

• In some cases, an attempt to clean the outside of the camera and thus return the image to its former clarity may fail. The essence of the problem is that dust and other dirt gets underneath the lens and clogs the lens from the inside. New smartphones such as iPhone 6, 6S, 7 And 8 are protected from dust and water, but for older models it seems iPhone 4, 4S, 5 And 5S The problem with a lens contaminated from the inside still remains relevant. In this case, it can only be cleaned by disassembling the device.
• If most smartphones can be removed back panel without much difficulty and the presence of third-party tools, then with smartphones from the company Apple such a trick will not work. Owners of Apple gadgets know that smartphones from the line iPhone The back cover is not removable and this is due to the company's policy. In fact, remove the lid on any iPhone it is possible, but if you do not understand electronics and especially smartphones, then the most the best solution there will be a service call for you Apple for device cleaning services.

• If you do not intend to spend extra money for cleaning services, you can remove the back cover yourself iPhone by unscrewing the two small screws that are located on either side of the power connector. Since the screws are very small, you cannot remove them with a regular Phillips screwdriver. You will need a special screwdriver for 0.8 , which can be purchased at any electronics store for a very small price (about 100 rubles). If you are too lazy to go for a screwdriver and you are not afraid of scratching the case, then you can use the blade of a paper knife instead.
• You will also need a suction cup for removing the screen, a spatula for removing the case (a plastic card or mediator will do), cotton swabs for cleaning the camera and special plastic tweezers for working with small parts of the device. Of course, you can use an ordinary metal one instead, but it can damage the “insides” of your iPhone.

IMPORTANT: The article provides an example of disassembling devices iPhone 5 And 5s. If you are the owner iPhone 4 or 4S, then the principle of disassembling these models is similar to the disassembly of fifth iPhones. If you are the owner of newer models ( iPhone 6, 6s, 7 etc.), we strongly recommend that you do not disassemble them yourself, but take them to a service center Apple in case you start having problems with the cameras. These models are perfectly protected from the penetration of dust and other dirt under the camera lens.

Step-by-step instructions for disassembling iPhone 5 and 5S

So, after you have acquired the necessary set of tools, you will need to perform the following steps:

Step 1.

• Turn off your iPhone and use a screwdriver to remove the two mounting bolts from the bottom of the housing.

IMPORTANT: Be careful not to lose the bolts as they are extremely small.

Step 2.

• Glue the pre-prepared suction cup to the bottom of the screen, as shown in the photo below, then pull it up and use a spatula to carefully move around the entire perimeter of the screen, snapping it away from the body.

Step 3.

• If you are the owner iPhone 5, the screen will immediately rise as soon as you disconnect it from the case.
• If you are the owner iPhone 5S, then you will additionally need to disconnect the cable that connects the screen and the body. To do this, you need to unclip the piece of iron under which the cable goes, and then remove it from the connector.
• By lifting the screen, you will gain access to the “insides” of your iPhone. You will need to unscrew the protective plate and remove the cables from the connectors located under it, and then completely disconnect the screen from the case.

• In the same corner as the previously unscrewed plate, the rear camera itself is located. Lift it up and use slightly damp cotton swabs to thoroughly clean the lens and protective glass. It is best to use alcohol-containing liquids to wet the sticks.

Step 4.

• After cleaning the rear camera, set the body aside and pick up the part with the screen. To get to front camera, You need to unscrew another protective plate secured with two bolts. Under no circumstances unscrew the third bolt located next to the required two.

Step 5.

• As soon as you disconnect the plate, the audio speaker will be removed along with it, which can be put aside for now.
• In the upper left corner, under the factory tape, there is a front (front) camera, which can be reached by peeling off a small section of the factory tape.
• As with the rear camera, clean the lens and protective glass with cotton swabs, replace the camera itself and put the factory tape back the way it was.

The cells are clean. Now you need to perform all the above steps in reverse order.

IMPORTANT: Remember that opening it yourself iPhone case, You will void the warranty on it. All material contained in the article is presented for informational purposes only. If you intend to try it in practice, you act at your own peril and risk. The site administration is not responsible for your actions. Also, during the process of disassembling and assembling the iPhone, we strongly recommend that you follow the video instructions presented below.

VIDEO: How to clean the iPhone 5/5S camera from dust?

1. Cotton swabs and even a vacuum cleaner are not able to fully help cope with dust. Therefore, you either need to constantly run to the salon for professional cleaning, or learn how to do it yourself correctly. We'll tell you how to clean it using the fifth iPhone as an example. First, unscrew the bolts that are located next to the Lightning port.

Super fast speed and great comfort - that's the Kross Tenuto

2. These bolts are very small in size, so it is both difficult to find a screwdriver for them and easy to lose. It would be best to purchase a special tool for iPhone. Next we need to disconnect the display from the main body. If you have watched videos on how to do this, then remember that under no circumstances should you disconnect the display using suction cups, even though this is shown in the video.

3. The fact is that if you apply force incorrectly, then when you disconnect the glass from the body, you will not get a phone, but a useless piece of iron. Therefore, if you nevertheless sent your phone for professional cleaning, and then noticed streaks or bubbles on the screen, then it means that it was not a professional who acted here.

4. Next, lift the screen module and see how dusty our phone is. After this, you need to remove the electromagnetic protection from the motherboard. It is this part of the phone that partially protects it from dust. But it happens that the seal in the case is broken, for example, if the phone is hit or dropped, and dust easily gets deep into the case.

5. Place all bolts and small parts in a plate. The fact is that losing any element is unforgivable. And be careful with the cables, because damage to them can lead to a failure of the phone.

6. Once we have removed all loose elements, we will use an air blower that runs on a compressor. However, adjust the air flow wisely to blow away all the dust without disturbing the electronic components. So be careful.

7. Now we proceed to careful manual cleaning. We will need to carefully clean the camera optics, flash and inner glass. To do this, take a cotton swab and gently wipe it. Then we wipe the inner wall of the back of the case and you can begin assembling the smartphone. Do not rush into assembly, so as not to forget any element.

8. When installing the cable, you should hear a barely noticeable “click” and not the sound of a breaking part. Now you can enjoy your clean iPhone. The entire cleaning took us five minutes. Finally, insert the bolts, turn on the smartphone and check the camera. We hope everything worked out for you and you will notice a difference in the camera's performance!

During use, the iPhone will inevitably become dirty. Dust, dirt, small particles, grease and other contaminants settle outside and inside the device. Contamination can lead to deterioration in the performance of the device and even to its failure. To prevent negative consequences from dust or dirt, you need to periodically clean your smartphone.

Which parts are susceptible to contamination?

The following external parts are most susceptible to this:

• screen;
• side edges;
• back panel;
• camera lens;
• button surface.

These parts are characterized by stains from fingers, settling of grease and dirt. The problem is partially solved by a special cover or film. But at the same time, contaminants often penetrate under protective accessories.

Internal parts may also be damaged:

• speaker membrane;
• connectors;
• SIM card tray;
• camera lens;
• microphone.

What problems can happen to your phone if you don't clean it?

The entry of various particles under the camera lens leads to deterioration in the quality of photographs, defocus and the appearance of spots. Contamination of the speaker membrane can lead to a decrease in volume and the appearance of extraneous sounds and hoarseness. If dust or other particles get into the connectors, they may break. If dirt gets into the microphone, it will degrade the quality and volume of the transmitted sound.

Also, if dust accumulates inside the case and gets on the processor, the device may overheat, which will lead to reboots, shutdowns and breakdowns. External contamination can cause the button to play, reduce its aesthetic appeal, and make the device more slippery in your hands.

How and what can you clean yourself?

To clean it yourself Apple iPhone As a rule, improvised means are used. Among these means:

• cotton buds;
• cotton pads;
• toothbrushes;
• toothpicks;
• alcohol;
• vacuum cleaner;
• air under pressure, etc.

Not all of these remedies are harmless to iPhone. If handled incorrectly, internal parts may be damaged and appearance apparatus. It is recommended to remove only surface contamination yourself: wipe the body, camera lens, screen, and also carefully clean the connectors. For complete and safe cleaning, contact a specialist.

The Total Apple service center, located in the center of Moscow, offers safe and effective iPhone cleaning services. The procedure is performed by specialists using special means, which will allow you to clean from any type of contamination within 30 minutes.