Many users, after upgrading from Windows 8 to Windows 8.1, receive the following error: “RunDLL encountered an error while starting. The specified module was not found." If this happens every time you start the system, then you can try to find a solution in this article.
There are several solutions, for example, . Moreover, this is done quite quickly these days, but installing some programs still requires you to spend a little time.
The advantage of this installation as opposed to updating the old one Windows version to a newer one, is that there is no damage to the system and no unnecessary records are left, so this method is very effective and preferable.
On the forums Microsoft, from users, messages about this error appear. It looks like this:
As you can see, there is nothing in the error message that could solve this problem, that is, it is not known in which direction to dig. Also, users can even see up to 3 messages about this error.
You can, of course, check the disk using the command, which must be entered into command line on behalf of the administrator. This may or may not fix the problem. Therefore, we will move on to the next method, just create a restore point first so that there are no even bigger problems later.
- Download a utility called Autoruns To do this, go here. This tool is recommended by the Microsoft developers themselves, as it does a good job of analyzing the system and can identify any problems. After downloading, open the archive with any archiver.
- Once you have unpacked the tool, you can see two files, from which we run Autoruns.
- Great. Now, in the window that opens, look for the tab Everything and in the window below, find the entries that are highlighted in yellow. Next, simply delete them by clicking on them right click mouse and then Delete .
- After deleting all these entries, close Autoruns program and restart your computer. Most likely, the problem will be fixed.
The file NvCpl.dll belongs to a program from an unknown manufacturer. Its task: NvCpl.dll ¼ÐµÐ½ÑŽ рабочего Ñтола, Ротображать наÑтройки д Connection NVIDIA RESULTS RESULTS » » ¸Ð»Ð¸ Ð¸Ð³Ñ €.
Typically NvCpl.dll is located in the %sysdir% directory. If this file is located in a different folder on your computer, you may have selected that location when installing this product. software. However, this may also indicate a viral infection.
NvCpl.dll Fix the error
If NvCpl.dll causes errors, the cause may be damaged registry entries.
In most cases, it is enough to check the Windows registry for NvCpl.dll errors!
If NvCpl.dll errors cannot be resolved, it is recommended to uninstall the program using the Control Panel and then re-check Windows registry.
NvCpl.dll is slowing down my computer!
Programs and files can greatly limit Windows performance. In some cases, the NvCpl.dll file also causes this effect. If in doubt, you should remove the corresponding program.
If NvCpl.dll is in the list Windows startup, this may cause your computer to slow down. RESULTS Ñтой программы.
Our advice: AVG TuneUp disables unnecessary automatically downloaded programs, as well as Windows processes, thereby reducing the load on the computer.
Is NvCpl.dll dangerous for my computer?
NvCpl.dll is considered to be a problem. If it is not in the default directory, it may indicate a virus infection. Check your computer using the latest antivirus program. Our advice: AVG Anti-Virus Free.
All information about NvCpl.dll:
Errors related to nvcpl.dll can occur for several reasons. For example, an erroneous claim: nvcpl.dll has been deleted or lost, corrupted by malware present in your computer; or a damaged Windows system.
The most common error messages:
- The program can't start because nvcpl.dll is missing from your computer. Try installing the program again to resolve this issue.
- There was a problem starting nvcpl.dll. The specified module was not found
- Error loading nvcpl.dll. The specified module was not found.
- nvcpl.dll is either not designed to run on Windows or contains an error.
In most cases, the problem can be solved by competent reinstallation in the system Windows folder nvcpl.dll in your computer. On the other hand, for some programs, in particular computer games, the DLL file is required to be placed in the game/application installation folder.
While working with the Windows OS, the user may encounter an error message that mentions an unknown “RunDLL” file, as well as a missing module (for example, KBDPopc.dll,). The appearance of the message “RunDLL encountered an error during startup” is usually a litmus test for the presence of any problems in the system. malware(for example, adware), the DLL libraries of which the system cannot access. In this article I will consider the essence of the problem “The specified module was not found”, and also indicate ways to solve it.
Causes of RunDLL dysfunction
The problem message can be divided into two conditional parts - a mention of “RunDLL”, as well as a notification about the impossibility of finding the module. What does this mean?
Rundll is system file Windows OS, designed to run (check) dll libraries. These libraries can be either useful system or malicious (as part of a virus program) in nature.
The message "RunDLL encountered an error while starting" appears when dll file, which should be launched at system startup (or at a scheduled time), is missing in its usual place (on disk). This absence can be explained by the previous deletion of this file while the antivirus was running, damage to the file itself, incorrect installation, or unstable operation of any software. Windows is trying to boot this file(after all, there is a link to it in the system registry), but cannot find it, so it displays the above error message.
Among more full list The reasons causing the RunDLL problem are as follows:
- Some dll libraries are damaged or missing;
- Malicious attack by viruses, adware or spyware;
- Incorrectly installed applications;
- "Worn out" or damaged system registry;
- Obsolete system drivers, requiring updating;
- Bad (broken) sectors on the hard drive.
How to fix RunDLL error "An error occurred during startup"
Most of the advice on this topic is “pure” level. Windows launch, using the functionality of the sfc utility, running the problematic program as an administrator and other analogues are ineffective. There are only a couple of ways that can fix this problem, and they will be listed below.
Because, as we have already found out above, RunDLL error occurs due to the fact that the registry contains a link to a missing file, then in this situation there are two ways:
- Remove the link to the missing file from the registry;
- Place the missing file in its “rightful” place.
Since in most cases the missing file is some kind of malicious file, previously deleted by an antivirus, then in this situation we need to focus on the first of the proposed options, namely working with viruses and the system registry.
Method No. 1. Antivirus tools
The first thing I recommend doing is checking your PC for viruses. For this we need best antiviruses for and , with which you need to check your PC for malicious software. After checking and removing the malignant files, reboot your machine and check if the error I was looking at, “RunDLL encountered an error at startup,” appears again.
Method No. 2. Functionality of the Autorans product
If the error “The specified module was not found” continues to occur, we will use specialized software called “Autorans". This program not only displays detailed list programs launched by the system, but also highlights in yellow those launched programs whose files are not present in the system. Thus, all we have to do is remove or disable the system input highlighted in yellow, which will help get rid of the problem in question.
So do the following:
Method No. 3. Let's use CCleaner
Another way to recover normal operation registry is to use programs for working with the registry level “CCleaner" or "RegCleaner". They will check the registry for incorrect entries, correct it, and thereby help get rid of the dysfunction that has arisen.
Conclusion
The most effective solution to the RunDLL problem is to use the capabilities of the Autorance utility, which will allow you to get rid of damaged or non-working entries in the system registry. I also recommend checking the system with some anti-virus tool, since in most cases the specified error causes any viral malware.
Hello everyone Let's talk about something as incomprehensible as NvCpl, which often sits in users' autoloads, which is why the users themselves are indignant, because what kind of beast is this... Well, in fact, there are no special secrets, NvCpl is from NVIDIA, that is, if you you see from this company, that’s why NvCpl is in startup.
When did you bet NVIDIA drivers, or did you not install them? The fact is that Windows itself can install them without even asking you! Well, when you install NVIDIA or other drivers, but I mean video drivers, almost all of them put something of themselves into startup. Well, that is, so that after turning on the computer you have quick access to the graphic settings, that’s why something from the video card software is loaded!
But if you look closely at NvCpl, it becomes clear that this is not even a program, it is a command call! Here's the usual command:
RUNDLL32.EXE C:\WINDOWS\system32\NvCpl.dll
That is, with the help of the launching file RUNDLL32.EXE, the NvCpl.dll library begins its work, yes, it smells like a virus, but there is nothing viral here. Believe it. This happened to me a long time ago, I don’t remember when, but it definitely happened. But what is NvCpl.dll? This is the library that is responsible for the operation of the NVIDIA driver control panel.
Even users who are on Windows XP have NvCpl:
In addition to NvCpl, you may also have NvMCTray in your startup, this is also from NVIDIA. And this could also be:
NvCplDaemon RUNDLL32.EXE C:\WINDOWS\system32\NvCpl.dll,NvStartup
nwiz nwiz.exe /install
NvMediaCenter RUNDLL32.EXE C:\WINDOWS\system32\NvMcTray.dll,NvTaskbarInit
This is all also from NVIDIA, it can be disabled, it does not affect the system in any way!
The only problem that can occur after disabling these things from NVIDIA is that there will be no quick access to the video settings. That is, the NVIDIA icon may disappear from the tray, or something like that. But again, there’s nothing so scary here. If, after you removed NvCpl from startup, and it then returned again, then, alas, then the only option is to completely remove the NVIDIA software. But it will most likely remove the drivers as well.
Disabling everything related to NVIDIA from startup will not in any way affect the operation of the video card itself, and even more so, such a disabling has nothing to do with the drivers!
NvCpl provides quick access to the following settings:
What is the course of action or what do I recommend doing? In general, the first thing is to create a control point. I wrote how to do this here, I advise you to look and create it! Secondly, turn off everything regarding NVIDIA from startup, this will help you CCleaner program. I wrote where to look for startup in CCleaner (there’s also important points Yes, because by default not everything is visible in startup).
I also found some information about NvCpl being a virus, but I don’t know what to say. NvCpl virus? Well, that's rare. If you have a suspicion, well, you never know, then I still advise you to check your computer with such utilities as: and. This best utilities against serious and dangerous viruses, so check it, that’s my advice.