Connect to PC or laptop
Most people install a router in their apartment, and only then start thinking about how to configure it over the air. Which is not particularly correct. For convenience, it is easier to set up the router by connecting it to the computer directly, and after setting it up, place it where it is more convenient for you.
To make a connection, first turn on the router to the network, then insert the wire from the provider into a separate socket, the color of which is different from all the others (white, blue or another color, under this socket there should be an inscription in the form of an “e” sign with a rim). Take the wire that comes with the kit - a patch cord - and connect it to one of the 4 “LAN” sockets, connect the other end of this wire to the network card. It needs to be inserted where the wire from the provider was connected. This completes the connection of the RT N12 D1 to the computer.
Resetting the RT N12 D1 router settings
Before you start setting up your router, I recommend using . Maybe you didn’t get a new router, or after checking it at the factory, they forgot to return the settings to the standard state. To reset the settings, you need to press the Reset button; for this you will need an object with which you can reach the button, for example, a match or a straightened paper clip. After pressing the button, hold it in this position for 10-12 seconds, or wait until all the lights on the front panel light up at the same time. And after that, wait until the router restarts completely.
Setting up the input on RT N12 D1
After the router connects you need. Login is performed as standard, as on all Asus routers. To get started, run . After that, write in address bar 192.168.1.1, login – admin, password – admin, and press Enter.
Once logged in, you will see the Quick Settings page. To better understand the process, it is better to do everything yourself. By clicking on the button, which looks like a “house” and is located in top corner on the right, you will be taken to the main page. For some firmwares, just click the "Next" button.
Setting up an Internet network on Asus RT N12 D1
First, set up your Internet connection. To do this, find an agreement with your provider, which specifies the settings and type of connection. If for some reason you cannot view these settings in the contract, please contact technical support your provider and ask them for these settings. After that, go to the “Internet” menu, located with right side.
IP address, dynamic. Setting up for Rostelecom, Volya, TDK-Ural, Kyivstar
This type of connection is the simplest. To configure it, just select “Automatic IP” in the WAN connection type field. After this, be sure to put “Yes” in the “enable WAN” and “enable NAT” fields, you can also enable “UPnP” - so that there are no problems when working with file hosting services.
Some providers are bound to a specific MAC address, in which case it is worth specifying it. This address most likely belongs to the computer that was previously connected to the Internet. If you are setting up on the same computer, simply click on the “Clone MAC” button, followed by the “Accept” button.
Setting up a PPPoE connection for Rostelecom, TTK and Dom.ru
To begin, select the WAN connection type - “PPPoE”, also enable WAN, NAT and UPnP by checking the “Yes” field. The main thing is that in the account settings, in the “Username” field, indicate your login, which you looked at in your contract or learned from the support service. And in the “Password” field, in the same way we enter the required value assigned to the login provided by the contract.
Similar to the Dynamic IP settings, some providers bind by “MAC” address. When performing setup on a computer that was previously connected to the Internet, simply use the “Copy MAC” button. If you are using another device, enter this address manually. When you have finished entering all the settings, click the “Apply” button.
Setting up RT N12 D1 with L2TP connection type and Beeline provider
To configure, if your provider is Beeline, you need to select the L2TP connection type. Then enable WAN, NAT and UPnP. The user name, in this situation, is the contract number, this is the same number to which you make Internet payments. Password – identical to the password from personal account. In point " VPN connection» specify – tp.internet.beeline.ru. At the end, all you have to do is click “Apply”.
IPTV, setting up Asus RT N12 D1
The IPTV settings in this router are incomplete due to the new firmware. You can select the port through which the signal will be received. If your provider requires you to specify a “VLAN ID”, I will disappoint you, because this router does not have it, and therefore it is not suitable for you.
In order to select a port, go to the “Local network” item. At this point, in the “Select IPTV-STB port” field, you will need to select the port to which you will subsequently connect the iptv set-top box. Finally, click the “Apply” button.
Settings WiFi Asus RT N12 D1
For Wi-Fi settings on this router model, you need to go to the “ Wireless network" In this tab, select “General” and enter some information there. SSDI is the name of your network, you can enter any name in Latin. “Authentication method” - selects only WPA2-Personal, “WPA Pre-Shared Key” is , specify whichever you like, but not less than 8 characters and click “Accept”.
When you finish entering any settings, reboot your router. The button for this is located at the very top of the interface. The entire reboot procedure will last about 2-3 minutes. After this, the setup of Asus RT N12 D1 is completely finished.
That's all. I created a small manual for setting up the asus rt n12. Setting it up is not as difficult as it seems, you just need to set aside a few minutes of your personal time. And then, after all the steps taken, you can fully use the purchased router. I hope this information helps you in setting up asus rt n12.
The Asus rt-n12 router is a fairly popular budget router that successfully implements everything necessary for simple home network functions. The device is a portable point WiFi access with an information exchange speed of up to 150 Mbit, while the device supports the common communication standard 802.11n with an operating frequency of 2.4 GHz and is equipped with 4 LAN ports for “hard” connection of local computers.
Asus rt-n12 router: indicators and connectors
There are seven LED indicators on the front panel of the router:
1 - power indicator (Power);
- - off – power is not connected;
- - steady green light means the system can be used;
- - flashing quickly - process.
2 - WiFi wireless network status indicator;
- - “off” – no power (or the network is disconnected);
- - lights up solid green – the system is ready to exchange data via a wireless channel;
- - flashing – data is being transmitted (wireless network).
3 - indicator of connection to the Internet (WAN);
- - “off” – the Internet from the provider does not reach the router (there may be problems on the line or the service has been suspended for non-payment);
- - lights up steadily – active connection to the Internet;
4 - connection indicators local network(LAN ports 1-4);
- - “off” – network cable not connected (or no electricity);
- - on – the corresponding port is occupied by an active connection external devices to the network via Ethernet cable;
- - blinking – data is being transmitted (via cable).
The rear panel is equipped with several connectors for an RJ 45 connector and switches:
- - one separately located WAN port (for connecting an Ethernet cable);
- - LAN1-LAN4 connectors (connection network devices);
- - one round connector for connecting the power adapter;
- - standard power button;
- - WPS button for quick authorization in the home network;
- - button to reset the router to factory settings (hold for 7 seconds);
How to connect Wi-Fi router asus rt - n12
It’s quite simple to install and configure the connection to the asus rt n12 router yourself:
- - connect the power adapter plug to the DC In socket located on the back panel of the router;
- - connect the power supply to a power supply with a voltage of 220 V;
- - For initial setup use a “hard” connection of the asus wireless router access point to the computer via an Ethernet cable (to avoid wireless interference);
- - connect the Internet cable provided by your provider to the WAN socket of the asus rt n12 router (if you need to connect this port to the LAN connector of the modem);
- - connect the LAN port of the router to the network card connector of a “classic” computer using an Ethernet cable from the “basic” set of the router;
- - if you have a TV set-top box, also connect it to the LAN connector of the router;
- - turn on the power button.
At this point, the installation and connection of the asus rt n 12 Wi-Fi router is completed - the device is completely ready for use. Step-by-step setup The modem is accessed through the built-in web interface of the device, which can be accessed through any Internet browser installed on the computer.
To enter the router settings, enter the combination of numbers 192.168.1.1 in the address bar and enter the authentication data in the window that opens.
By default, the login and password “admin/admin” is used.
If the router was in use before, you should first reset the settings of the asus rt n 12 router to factory settings according to the instructions in the final part of this article.
Setting up an asus wirelessroute rt n12 router for Rostelecom
To configure the asus rt n 12 wifi router to connect to the Internet through providers such as Rostelecom and Dom ru, go to the router settings, find the “Advanced settings” tab and select “WAN” here.
At the top of the window, set the following Internet connection settings:
- - WAN type– from the drop-down list of connections you must select PPPoE;
Most Rostelecom subscribers use PPPoE connection to the Internet. However, when self-configuration router, it is still recommended to clarify your type of Internet connection: this information can be found in the contract with the provider or clarified by calling the technical support of your Internet service provider.
- - the choice of port for setting up IPTV STB depends on which port you connected the set-top box to, but by default it is recommended to use the LAN4 connector;
- - enable UPnP – mark the option “Yes” with a marker;
- - get a WAN IP address automatically – select “Yes”;
- - enable PPPoE relaying – it is recommended to set the option “no” from the list.
- - in the username and password fields, enter the data received from the Rostelecom operator for connecting to the Internet.
Setting up an asus rt n12 router for Beeline and MTS
In general, the instructions for setting up an asus rt n12 router for MTS, Beeline and other “mobile” providers are similar to setting up a router for Rostelecom.
Here, in the “WAN” - “Internet Connection” tab, set the following values:
- - WAN connection type - set the L2TP item;
- - enable UPnP - set the marker to “Yes”;
- - obtain a WAN IP address automatically – check “Yes”;
- - connect to the DNS server automatically - select the “Yes” option;
- - L2TP server (VPN) - for beeline, enter this address tp.internet.beeline.ru.
"Username" and "password" in in this case are issued to the subscriber by the Beeline service provider. Enter them. There is no need to change the remaining parameters - feel free to click the “Apply” button.
However, when setting up a router for MTS, there are certain subtleties.
In the WAN connection selection tab, you need to set auto mode connections. The login and password must be entered into the appropriate tab “Account and connection settings” - you receive them directly from the operator.
How to set up wifi on asus rt n12 router?
Setting up WiFi on the asus rt n12 router is carried out in the “Wireless Network” tab, where you need to set the following parameters:
Configuring the asus rt n12 router to watch IPTV consists of the following steps:
- - select the “local network” tab in the menu;
- - further IPTV;
- - enable multicast routing – mark the “Enable” option with a marker;
- - enable IGMP Snooping – set the marker to “Enable”.
Leave the remaining items unchanged and click the “Apply” button to save the new settings.
asus rt - n12 setting up vpn server
Go to the router management menu and follow the following instructions step by step:
Set any IP address in the range from 192.168.10.2 to 192.168.10.254: the asus rt -n12 router simultaneously supports up to 10 clients. In the tab VPN server You must enter a username and password. Save your changes. 
In the network map section you can see the status of your VPN server, its IP address and connection status.
How to reset the settings of the asus rt n12 router?
Reset custom settings The factory ones are quite simple: for this you will need a regular needle or pin. On the back of the router, find the socket labeled “Reset”. Press and hold for 10 seconds. The device has been reset. Release the button.
How to set the password for asus rt n12?
ASUS RT-N12 is a very popular device, which is classified as a budget option. It contains all the necessary characteristics for the successful operation of an ordinary home, public or work network. The device is a portable Wi-Fi access point, which has an information transfer speed of up to 150 megabits per second (possible Internet speed). The operating frequency of this device is 2.4 GHz. According to the standard, it has 4 network (regular cable) ports; these are standard characteristics for the ASUS RT router, which are needed for direct connection to a desktop computer.
Overview of all bulbs and connectors
The front part contains 7 indicators that will let you know the state of the device at this moment.
Number 1 we have identified the most important led indicator. This is the power indicator. The indicator can have several configurations:
- The light is off. This means that there is no power, or the device is simply turned off.
- The light flashes with a large amplitude. This means that the router is just starting up.
- The light flashes with a small amplitude, quickly. This means automation is happening.
- The light stays on without blinking. This means that the system is loaded and can be used.
Number 2 we have identified an indicator that determines Wi-Fi status ASUS RT N12 D1 router on this moment. It has three configurations:
1. The light is not on. There is no power or wireless mode may be disabled.
2. The light flashes. This means that information is being transferred.
3. The light just stays on. The device is ready to transmit data, but no packets are being exchanged at the moment.
Number 3 We have designated an indicator that determines the router’s connection to the Internet. There are only two configurations:
1. Off – no internet. This may be due to non-payment, due to communication problems, or due to disconnection from the Internet in equipment installations.
2. Lights up – everything should work properly.
Numbers 4-7 indicators of the status of local ports are indicated. Each has three configurations:
1. Off – the cord is disconnected.
2. Light flashes – information is being exchanged.
3. The light just lights up - this is a sign that the port is occupied by the cable connecting the PC to the network.
The rear panel contains connectors and switches. There are no indicators on it.
1. WPS button (starting from the right side), which is used to quick login to the network.
2. WAN port, it is designed to connect the Internet cable to the router.
3. Four network ports, which are needed to directly connect the PC to the router via cables.
4. Micro connector for power cord.
5. On/off key.
6. Reset key. It is inside the hole; press it for seven seconds to reset to factory settings. The factory settings are standard password and login.
How to install a router
Installing a router is not difficult and will not take much time. Connection and setup takes longer. First, you should check the availability of all components so that the installation takes place correctly:
· The router itself.
· Power unit.
· Internet cable, which must be provided by the company or provider.
· For the first installation, you need to use a local (direct) Internet connection so that there is no interference.
Once you have found everything you need, you can proceed with a fairly simple installation. First you need to figure out how to connect the Internet to the router using an Internet cord. We designated the connector for this cable with the number 2. Then you need to connect using a LAN cable. All that remains is to connect the router to power by inserting one end of the power cord into a power supply with a voltage of 220 Watts, and the other end into connector number 4. Then press the power button. We act in exactly this order.
Installation, as you can see, is not difficult. After these steps, the router should start up. This completes the installation of the router; further debugging is done using a specific page built into the router.
Setting up ASUS RT-N12
To configure the router you need any browser. Enter “192.168.0.1” or “192.168.1.1” as the site address - without quotes.
Attention! The PC or laptop must be connected to the router, and not to the Internet cable.
After going to the page, a window with data entry fields will appear.
Here you need to enter a user name and password. When the router is just purchased, the default login and password are the same – “admin”. After complete debugging, it is recommended to change both the username and password to eliminate the possibility of hacking.
There are times when the router has already been used before, then the name and password sometimes differ from the standard ones. In order to fix the ASUS RT N12 device, the firmware is returned to its original state. To do this, you need to hold down the key, which was designated above as number 6. You need to hold it down with some thin object, the easiest way is a paper clip. Hold the key for 7 seconds. After this, all changed router settings will return to their initial state.
If these manipulations do not help, the router does not return to standard settings, then the setup must be performed by a specialist whose range of work includes ASUS RT N12 firmware. You can handle this task yourself, but updating the router firmware is not a standard situation for regular user. Reflashing a router is much more difficult.
Connecting to the Internet with full setup
In order to connect the Internet to the router, on the website that opens, you need to go to the router settings. Then - " additional settings" Select the “WAN” item we need (this is setting up an Internet connection).
In the main settings you need to set the following data:
· WAN connection type – select here PPPoE (the most popular) or for Beeline L2TP (you need to check with your provider).
· Enable WAN – our choice is “yes”.
· Enable NAT – our choice is “yes”.
· Enable UPnP – our choice is “yes”.
In the next window, called setting up a WAN IP address, opposite the line we need, “Obtain a WAN IP address automatically,” we must mark the answer as “yes.”
Setting up DNS WAN, similar to the items that went before, opposite “Connect to the DNS server automatically” you need to select the option “yes”.
In the username field, as you might have guessed, you need to enter your number or login, which is provided by your Internet provider to log into the Internet.
The password is identical.
Some fields are allowed to be skipped. In the VPN server, enter the one provided by your Internet provider. If you are configuring the ASUS RT N12 router for beeline, then this is “tp.internet.beeline.ru”, for Rostelecom you do not need to mark anything.
After this entire procedure, click on the “Apply” button. This completes the configuration of the Internet on the router.
Connecting to the Internet using quick setup
Quick setup of ASUS RT N12 can significantly reduce the time required for full customization router. On home page router, press the “Go” or “Go” key.
The router then automatically detects your connection type. Although he himself will determine the necessary parameters, the login and password for the Internet will still need to be entered manually in the WiFi settings.
Setting up wireless mode
Setting up the ASUS RT N12 in wi-fi mode is quite simple thanks to the “quick setup”. Final stage quick setup— debugging wireless network parameters. Here you can set the SSID and network key or password.
They also perform setup in manual mode. Here we go to the “Wireless Network” window, we only need to set a few parameters. Among them:
· "SSID" is the name used to locate your Wi-Fi router ASUS RT N12. Write in Latin letters (English).
· “Authentication method” field – here we definitely highlight WPA2-Personal, it will help protect your Internet from unwanted users.
· “WPA Pre-Shared Key” – the key or password for your Wi-Fi. Enter when connected to Wi-Fi. Enter the key no shorter than eight characters.
Now you can save the settings. Right now WiFi setup ASUS RT N12 router is absolutely complete. You can connect all the devices that are in the apartment and use Wi-Fi even on the washing machine.
Small addition
How to perform port forwarding? We'll tell you how to open ports on the ASUS RT N12 C1 router, the setup is quick here. Since this is just an add-on, the instructions will be very condensed. We proceed according to this scheme:
192.168.1.1 (address) -> Local network tab -> DHCP server window -> Enable manual assignment field - “Yes” -> MAC address (here you need to select the right computer, to which a static address will be assigned) -> Select and apply (after you have selected the desired PC).
If this does not help, then check your antivirus and firewall.
Video on the topic
Happy Internet to you!
This setting is suitable for ASUS RT N12vp and ASUS RT N12e routers. What can you say about this router? This is exactly the router that is in my apartment, I bought it for an incredible amount of money, about 1 thousand rubles, it seems in the CSN, it was not difficult for me to set it up and forget it. The fact is that at that time there were no funds, and renting from a provider, like you, was not my style. Chose the most a budget option and have never regretted it. ASUS firmware RT N12vp is completely translated into Russian, it has a cool appearance, its network coverage radius is quite enough to broadcast around the apartment without problems. I would also like to note the pleasant interface of the web muzzle. As for quality, for two years there was not a single malfunction, once I caught a virus, but after resetting to factory settings and changing the password, no problems arose. Among the shortcomings, I can only mention one: the LED lights burn too much, just like a Christmas tree, and interfere with sleep at night!
Appearance of the ASUS RT N12vp router
Router connection diagram.
A cable from a PC is connected to any yellow port. Blue WAN port, a cable from the provider is connected.
We've figured out how to connect the ASUS RT N12vp router, now let's try to configure it. You can enter the router settings using a browser; if you are unable to enter the settings, then read the instructions for setting up the network card:
To enter the settings, open your browser and enter the address: HTTP://192.168.1.1
Enter the login: admin and password: admin and press Enter.
If the specified login and password are not suitable, then you need to reset the router to factory settings, for this there is a button on the modem case, press and hold it for 15-30 seconds, then try to log in again.
Connection status, wireless network settings, number of devices connected to the router. We can change the language.
Setting up an Internet connection
To start setting up, you need to know your type of Internet connection, the following options are possible:
- DHCP, automatic IP
- Static IP
In my case, the Akado-Ekaterinburg provider issues a static IP address, connection type PPTP.
Configuring ASUS RT N12vp and ASUS RT N12e in L2TP mode, go to the Internet tab and fill in the following parameters.
You do everything as in my screenshot, the only thing is that your access details will be different, you will check them with your provider, after you have succeeded in setting them up, click the apply button. The setup is complete, you can see the connection status on the main screen.
Settings for other connection types are carried out in the same way; if the connection cannot be established, I recommend contacting your technical support, perhaps there is a binding by MAC address, or, for example, you are entering your login or password incorrectly, they will tell you about it.
WiFi setup
Now let's figure out how to configure wireless point Wi-Fi access on our ASUS RT N12vp. To do this, go to the Wireless Network tab.
We set the following parameters:
- SSID - name of the wireless network.
- Wireless network mode: auto.
- Authentication method: WPA2-Personal.
- Encryption: AES
- The WPA Preshared Key is your Wi-Fi password.
Click Apply.
This completes the wireless network setup.
Connect to our network.
Links
Video
Found a typo? Select the text and press Ctrl + Enter
How to connect and configure the ASUS RT-N12 VP router
ASUS has long earned worldwide recognition as a manufacturer of high-quality computer equipment. One of the areas of activity of the enterprise is the creation of network devices. Model
ASUS router
RT N12 VP ranks first in popularity among routers of this brand. How to configure this device correctly? This review will help you find out everything!
Of course, configure the router for any provider
Connecting the router to a PC
Users often install
ASUS router
here and there in a corner of the apartment, and only later do they think about how to correctly configure the operation of the equipment via Wi-Fi. Experts advise setting up by directly connecting to a PC, and only later transferring it somewhere. The connection process is no different from connecting other routers to a PC:
- provide ASUS RT-N12 VP power supply (plug in);
- plug the provider cable into a port that is different in color from the others;
- connect a wire (available with the device) to the computer and your router (in network card insert one end and the other into any of the ports of the N12 VP router).
Now everything is ready for the upcoming router setup.
Reset options
To configure the router, it is important to first perform
reset
to standard specifications. Use a match or a toothpick - it will allow you to get to the reset button (a small button located deep inside the device). Press the button for 10 seconds. On the panel ASUS RT N12 VP must light up; our client's indicators remain. After this fact, the router should reboot on its own.
Read also
Where is the BIOS battery located on a laptop? Does the laptop have its own battery for the bios? BIOS battery in a laptop It’s best to guess that the BIOS battery, first of all, plays the role of an additional power reserve for the computer. Secondly, it supports the work...
TV stands. new look Instead of simple TV stands, multifunctional racks and stands are coming, which are equipped with special shelves, holders, as they are also called. Simple TV stands are being replaced by...
How to check Xiaomi Mi Band 4 for originality? Following the general passion for fitness, many leading electronics manufacturers have released devices for measuring athletes. The global brand Xiaomi did not stand aside. We will tell you how to check your...
Facebook Inc will allow the new external oversight board to make final decisions about whether certain pieces of content are actually displayed on the web site's pages, but the group will not be able to make policy changes, it says...
Replacing the matrix / display of a MacBookReplacing the matrix of a MacBook Apple technology has many advantages, but it is shock-resistant Screen MacBook Air, Pro or Retina are not yet one of them. Sometimes the impact is not strong, but the matrix is broken. You can quickly replace the display...
How to update Android on zte skateNowhere. The bot for each pipe is very different. Firmware Android phones, tablets kemiisto 09/21/12 my first phone. The software update was chosen based on cost/quality ratio. Receipt ROOT rights. let...Good evening! To...
Login to the interface
Settings carried out in the web interface. It’s easy to get there - write the line 192.168.1.1 in the address bar of any browser you like. After such manipulations, you can see a window with fields for name and password. You must enter the standard data for any router (admin/admin). Confirm your decision by pressing Enter.
How to reset router options ASUS RT-N12
In this video you will be interested to know how it is done reset options router ASUS RT—N12, also where the button is placed.
RESTORING THE ASUS RT N12 ROUTER
Recovery (flashing) computer programs(firmware) on the router ASUS RT—N12 D1. Creator: .
Web options
An overview of the window that appears will help you understand the main options. What remains for our manipulation client to do is to create everything in order, so we’ll immediately discard the rapid options mode. Go to the home (main) page of the router menu. Depending on the specific firmware, you will need to click the “Next” button.
Read also
Sending music from iPhone via WhatsApp, Telegram and mail In this article we will find the answer to the question: “how to transfer a song via WhatsApp and Telegram”. No jailbreak or paid software. iOS mobile OS has a number of limitations. Apple is available...
How mail.ru services penetrate your computer This happens when you install some free applications. Some of them are easy to recognize. If they were made by responsible people, during installation you will see two options: quick installation and select...
In the iPhone XS Max review: battery, autonomy, fast and wireless charger. Speed of operation, results in benchmarks, screen tests. In the first part iPhone review XS Max we talked about the technical properties. There you will find a table with...
Xiaomi Mi 6 or Xiaomi Mi 5s - which is better? Comparison of the new and former flagships. On April 19, the Xiaomi Mi 6 phone was presented - beautiful, powerful, and, what is most important for most people, new flagship one of the most recognizable Chinese companies...
How to reset Samsung Galaxy Tab 2 7.0 P3110 - reset (full reset) I decided to try the audio restart button. Didn't help Sometimes tablets and phones with operating system Androids are failing. if you have Android device and you decide...
To be able to use the web, you need to correctly configure the ASUS RT N12 VP connection. For this purpose, indicate the connection type and also enter the information provided by the provider. The most useful data is indicated in the contract issued by the operating company. If you lose such a document, contact technical support - they will help.
The characteristics of the router option look like this:
- on WAN - Sell;
- type - WAN connection;
- on UPnP - And sell;
- IP - automatic (or dynamic);
- on NAT - Sell.
UPnP is needed for the production activities of a file hosting service via ASUS router RT N12 VP. Some providers bind users' computers to a specific MAC address. If such information is in the contract, it must also be entered in the field provided for this purpose. You also need to remember to fill in the Username/Password in the settings account. The decision to save the changed information is confirmed by clicking the “Accept” button, after which the web setup is considered complete.
The actions differ (everything depends on the specific provider), but the general principle remains similar. The only difference is the type of connection used (for Beeline - L2TP).
Wi-Fi setup
Making ASUS RT N12 VP a router so that the web can be distributed to other devices is also easy. What you need, Wi-Fi on the n12vp router is configured in the “Wireless network” section. Enter the following characteristics in the “General” section:
- SSID - network name (you need to enter at least some name that will help distinguish your network from your neighbor’s);
- WPA key - come up with one strong password for your own Wi-Fi;
- authentication method - WPA2-Personal;
- save the configurations.
The RT N12 VP router will start distributing after the device is rebooted.