The Internet has become an integral part of life, and every computer should have access to the network. At home, a connection via a Wi-Fi router is suitable for this, which provides the ability to use both a wireless connection (for laptops, mobile phones, tablets) and a cable connection (for desktop computers).
Where is the best place to install a Wi-Fi router?
For those who are considering options for how to install a router, you should start by choosing a location to place the device. This is influenced by several factors:
- location of the provider's modem or cables, if used;
- apartment layout;
- location of the desktop computer (if any).
Exist different models wireless devices from Asus (Asus), TP Link, D-Link (D-Link), etc. They may have at different speeds data transmission, coverage area. This should be taken into account when you choose a location for the device, so that access is available anywhere in your apartment. IN in this case the best solution there will be a central point if the cable, the location of the modem and the desktop PC allow it. If you have to install the device closer to the computer in order to run a cable to it, then you need to focus on this factor.
How to connect a router to a computer or laptop
It’s easy to figure out how to connect a Wi-Fi router to a computer. The process itself is quick, but problems may arise with setting up the device. Separately below, we will consider the option of connecting a desktop PC via a wireless network and using a network cable. The option of how to connect a router to a laptop is practically no different. Before purchasing a receiver, please be aware that there are models on the market that do not support Wi-Fi distribution and act as an adapter (for connecting several devices).
At the first stage, to gain access to the Internet, you need to correctly connect the wires to the device. There are several major router manufacturers, but the connection diagram always remains the same. Here step-by-step instruction how to connect a wifi router to a computer:
- Unpack and install the device, plug it into a power outlet. On the back panel, as a rule, there is a button to turn on the device: press it. If a signal is received, the lights on the router will light up.
- There are several sockets on the rear panel. One of them is always located on the edge and painted in a different color (blue, yellow) with the signature WAN. Connect the wire from the modem or the Internet cable into it. You should hear the latch click, indicating that the cord is securely secured.
- If you need to connect a cable to the PC, then insert it into any of the empty sockets nearby and stretch it to the connector on the network card. When connected, the light should light up, which means there is a signal.
- When connecting wirelessly, you need to go to the network settings on the PC itself.
Wireless router connection
Most users are interested in the option of how to connect to a router wirelessly. In the case of a laptop, everything is much simpler, because it has a built-in module for receiving Wi-Fi signal. When it comes to regular PCs, the situation is somewhat more complicated, because you will additionally need to purchase an adapter for a Wi-Fi network. They are easy to find in any hardware store and are often sold together with modems.
There are two options on the market Wi-Fi adapter ov for PC – external and internal. The first ones are connected via a USB cable and stand on the table; they look like a docking station for an Apple player. The latter are mounted on the motherboard via a PCI connector. They work equally well, but the external version can be disconnected and connected to another device, and the built-in one does not take up space on the table. The device should come with a driver disk and software.
After connecting to the computer, setup occurs in exactly the same way as on a laptop. In most cases, to enable Wi-Fi on your computer, you just need to find your connection in the list of networks and enter the password. If you are connecting for the first time, you may need to specify the settings that were given to you when concluding a contract with the provider.
Wired connection using twisted pair
Previously, there was only one way to connect a wifi router to a desktop computer - a cord. At first the cable from telephone line(sometimes still used), then others appeared that provided not only a computer with Internet access, but also a TV cable channels. This connection method is still used today, as a rule, for stationary PCs. How to connect a computer to a router via cable:
- connect the provider’s wire to the wi-fi router into the socket labeled WAN or Internet;
- The power cord should be inserted into one of the LAN connectors;
- the other end of the cord must be connected to Ethernet port computer, after connecting the light should light up (blink).
What to do if the router does not connect to the Internet
Even if you know how to connect a wifi router to a computer and have done all the necessary manipulations, a situation may arise that a connection to the Internet is not established. At the same time, everything works correctly through the cable, and wireless network does not transmit data, but is visible in the list of connections. If you call your provider’s support service, the first thing the specialist will do is suggest unplugging wifi device, wait 3-10 minutes and turn it on again. In many cases this really helps.
If this method does not help, then there is a high probability that the computer cannot automatically obtain an IP or DNS address networks. To check the settings, you need to click on your connection right click, select “Network Center”, click on the image of the network connection and go to the “Details” tab. If the DNS or IP item is empty, then this is the problem. You need to call support and find out what values need to be entered in the properties. After receiving them:
- Click on the connections and click on the “Properties” button.
- Find the item that ends with TCP/Ipv4. Click on it and click "Properties".
- Activate the “Use the following IP address” items, enter the data provided to you by your provider.
- Repeat the same for DNS gateways.
- Click "Ok" and close the other tabs.
Video instruction: how to connect a router to a computer
Routers have long ceased to be something rare and unusual. Nowadays there is a router in almost every office, as well as in most homes that have the Internet. This article was written for those who recently purchased this device and are just figuring out how to connect the router to a computer.
Usually, desktop computer connect to the router using a cable. Whereas laptops and netbooks are connected using WiFi. In this article we will look at the connection process using a cable. So, for this we need the following equipment:
- The router itself.
- You can read about that in one of our articles; Network cable. To connect the router to your computer via cable, you need Cat 5e. Moreover, this is given on both sides (the compression method is direct). As a rule, the router comes with a ready-made crimped network cable about 1.5 meters long. This cable is perfect if you plan to place the router on a table next to your computer. If there is no network cable or it is too short, then you will have to purchase it separately.
- Computer with network card. This shouldn't be a problem since most modern computers(as well as laptops and netbooks) are equipped with a built-in network card.
Once you have collected everything you need, you can begin connecting the router to your computer. To do this, take a network cable and plug one end into the LAN connector on the router, and the other end into the computer’s network card.
Please note that the router may have a large number of network connectors. As a rule, these are 4 LAN connectors (connectors for connecting computers from your local network) and 1 INTERNET connector (connector for connecting to the Internet). You need to plug the cable into one of the LAN connectors (it doesn’t matter which one).
As for the network connector on the computer, there is nothing complicated here. As a rule, there is only one and is located on the rear panel system unit, next to the USB connectors.
If you are using a laptop or, then you need to look for the network connector on the sides of your device.
After you have connected the network connector on the router and the computer using a network cable, the indicator on the router should turn on, indicating that a device is connected to the router.
That's it, connecting the router to the computer via a network cable is complete. After this, the local network and the Internet should work on the computer.
A special icon on the taskbar will indicate that the network and Internet are working.
If something went wrong, this icon may be crossed out with a red cross. This means the network is down.
There are a large number of problems that lead to such a situation. The most common problems are:
- Problems with the network cable. The cable is not connected, damaged or incorrectly crimped;
- The network card is disabled in Windows settings;
- Not installed network card;
- The router does not work (is disconnected from the power supply or is faulty);
It is also possible that the local network is working, but there is no access to the Internet. In this case, a yellow triangle will be shown next to the icon.
Setting up Wi-Fi at home is often a big problem. If you don’t want to cut off your phone number to your provider, follow simple instructions and everything should work out. At best, setting up a router out of the box will take about 15 minutes. Shall we time it?
Important!For example, we took a router TP-LINK TL-WR840N . Program interfaces for setting up different models TP-LINK routers may vary slightly (not to mention routers from other manufacturers). Look for the menu items you need, and don’t be alarmed if yours is different from the photo instructions.
Most quick way for settings Wi-Fi router - not the one with the disk. Although installation disk and is included with each router; this installation is not available for everyone. We'll go the other way - let's see how to configure the router manually.
In order to successfully connect the router, you need to know the type and parameters of your Internet connection:
- IP address;
- subnet mask;
- login;
- password.
This information must be contained in the agreement for the provision of Internet services. There is no contract or the contract strangely does not contain any of the above points? We call technical support and find out.
Connecting a router
- We connect the router to the network (the power cord is included - is there one?).
- Press the ON button. on the router (many routers are also turned on directly from the outlet, but in vain). In our case, both the power adapter and the button are in place.
- In the box we find a network cable. At one end we connect it to the router (there are many ports on the router, you need the one labeled “LAN”,necessarythe port is also usually highlighted in a different color from the others). To others - to network card PC.
- You need to enable automatic acquisition of an IP address. You can do it like this:
Router administration
- On a PC, open any browser (we used Google Chrome).
- We enter the router address in address bar(for Wi-Fi TP-LINK routers this is 192.168.0.1 or 192.168.1.1).
- In the window that appears, enter your username and password. If in technical documentation or the bottom of your router does not indicate otherwise, standard routers use:
- login: admin
- password: admin
If you did everything correctly, this page is in front of you. The menu is always in English. On the left is the menu, in the center is the content of the selected item on the left, and on the right is an explanation and the most important settings items.
How to set up a Wi-Fi router at home
Don’t be afraid: you don’t need to fumble around in every section with an English-Russian dictionary at hand. All you have to do is tick 3 boxes.
Chapter Network, paragraph WAN. From the list, select your connection type - Dynamic IP, Static IP, PPPoE or PPTP (see contract). In our case it is PPPoE. Each type of connection requires tuning. Using the prompts below, complete the settings on your router and clickSave(at the bottom of the page).
PPPoE
Dynamic IP
Static IP
PPTP
Important!The provider is sometimes bound to the MAC address of the network card (a typical phenomenon for Dynamic and Static IP), so we additionally go to MAC Clone and press Clone MAC Address. This is in case you did everything as stated above, but for some reason nothing worked.
Setting up a Wi-Fi network
We have almost figured out how to connect Wi-Fi - all that remains is to configure the Wi-Fi network. So let's go toWireless- Settings.
We find our location in the list, come up with a name for this network (it’s better not to be clever with the name, but you can’t leave it “as is” - if it matches the name of a neighbor’s Wi-Fi, problems may arise).
Among other things that are on this page, the following menu items may be useful:
- Enable Wireless Router Radio - enables/disables Wi-Fi;
- Enable SSID Broadcast - enable/disable visibility Wi-Fi networks, if you disable this item, this network will not be displayed when searching for general Wi-Fi networks (only via SSID).
The latter is not a way to hide from your neighbors, so don’t rush to be clever with secrecy.
Setting up Wi-Fi network security
We remain in the sectionWireless, go to the submenuSecurity. The optimal choice of parameters from the list is in the photo below. You only have the Wi-Fi password. We recommend that you write it down in the contract for the provision of Internet services (so that it certainly doesn’t get lost).
Connection and operation
You can, of course, still configure local network and change administrator passwords (the ones that are admin/admin by default on all routers). But these are already bonus points. The majority of users can start working after rebooting the router. You can do this by clickingREBOOTin the message that pops up at the bottom of the settings page.
Now we connect the cable from the provider (through which the Internet comes to your apartment) to the INTERNET port, highlighted in color and labeled. Other ports are designed for wired connection of PCs and laptops that have problems with wireless.
Now you know how to connect a router in 15 minutes. By the way, how long did you have on your timer?
P.S. Indicators
Not all routers are built the same, but keep in mind:
- indicator Systemshould flash, not light up;
- Power- just burn;
- the middle indicators are blinking - data is being exchanged, the indicators are on - there is no network activity, off - there is no connection;
- Internet- lights up when there is a connection, flashes - data is being exchanged, doesn't light up - check the cable connection.
If you need a signal amplifier or, say, a Wi-Fi adapter, you can select wireless data transmission equipment for any occasion using the link below:http://price.ua/catalog454.html.
In the 21st century, the Internet has become an almost irreplaceable technology. They use it at work, at home, at school and even on vacation. Today, having a computer and an Internet connection, we can find out almost any information, get an education without leaving home, work, communicate and much more.
How to connect a wi-fi router?
Wifi technology or wireless connection allows you to connect to the Internet not only from a computer, using wires, but also from any device, which supports the function wireless connection. Such devices include not only phones that are familiar to everyone, tablet computers and laptops. Using a wireless connection, you can use the Internet on TVs, connect via the network and many modern consumer electronics devices. The technology is the same for all existing operating systems, be it Windows, Mac or Linux.
To connect to a Wi-Fi network, special Wi-Fi routers are used. One of the leading manufacturers of routers is the Chinese company TP - Link, using the routers of this company as an example, we will consider connecting and setting up a Wi-Fi router (although all such devices are not very different in terms of setup and connection).
There are two possible types of connecting a computer or laptop to a wi-fi router:
- First way. Wired connection.
- Second way. Wireless connection.
Both methods require preliminary activation wifi router to the network and connecting an Internet source to it via a cable (this can be wired Internet or USB modem). In physical terms (connecting cables to connectors), there are no differences in connection for different operating systems (Windows, Linux, MAC OS), but the internal settings may differ. Most often, configure the device to Windows is simpler than on Linux.
Wired connection to Wi-Fi
For this method you need First connect the router to the Internet by connecting the provider cable to the WAN socket on the router. Then you need to stretch a cable, one end of which is connected to the LAN socket on the router, and the other to the Ethernet socket on the computer. If the connection is successful, the indicator light on the tp link Wi-Fi router will light up to confirm the connection.
Wireless connection
Today, this option is much more interesting than the first. It, as the name suggests, does not require cables. For wireless wi-fi connections In principle, no special actions are required to connect a router to the laptop, since all modern laptops have a built-in wi-fi module. In the case of a personal PC, connecting wirelessly will require purchasing an additional adapter. Such adapters have the following varieties:
- External. Used for connection USB port computer. This method allows you to easily connect and disconnect the adapter.
- Internal. To connect, you must connect the adapter directly to motherboard. The internal adapter is stationary, just like a PC. It is inconvenient to use as the first type.
If there are usually no problems connecting the device to a computer or laptop, setting it up can still be quite difficult. The complexity arises because each router has different interface and setup procedure, so it may be difficult for an untrained person. As an example, we will consider the setting on the router of the company Tp link, which was mentioned above.
By the way, there is a chance that the wifi device will automatically work and connect to the Internet on its own. But most often this is not the case.
To start wifi settings router you need to go to its menu. To do this, you will need to enter the IP address of your device in the address bar of any browser. The IP can be found on the device itself, on its box, or in the manual. However, if the address is not found, you can enter the most popular IP, which may be suitable. Most often the address is 192.168.1.1. If it doesn’t work, then you should try entering the following addresses – 192.168.0.1, 192.168.1.0
After going to the router menu, we will need to enter your username and password. This is usually the combination admin/admin. The username and password can be changed at will.
Next, in the main menu of the router you can configure very, very many things. If you just need to set up an Internet connection, you should check if this model has wifi router Possibility of fast automatic configuration. It is available on most tp link routers.
For manual settings required Simply enter the data received from the provider that provides you with access to the Internet into the appropriate boxes. This data includes the router's IP address, subnet mask, connection type and some other settings. After this, most often you need to save the settings and reboot the device.
In the main window wifi menu router, you can find the Wi-Fi connection security settings. It is recommended to come up with good password so that your connection is secure. You can use the password to enter the router menu (not admin, but a new one invented later).
If problems arise in setting up any parameters, it is recommended read the instruction manual. All operating modes and ways to configure your device are described there. You can also watch special videos on the Internet.
Sometimes on a computer, for example, on Windows, in the lower right corner of the monitors we can see a network connection icon with exclamation mark. This means that the device is connected to the PC, but there is no access to the Internet. In this case, it is recommended to look at the network settings on the computer itself, in the Network Control Center and shared access.
Some providers provide Wi-Fi routers already configured to connect to the network. In this case, you just need connect the router to a computer or laptop, insert the disk that came with the device into the drive, and use the installation wizard to connect to the Internet. In this case, you usually need to enter the data provided by the provider.
Do you want to install Wi-Fi so you can use the Internet and be able to access the network from any device? But there is only one catch: how to properly install a Wi-Fi router (router) - a device necessary for creating and connecting computer networks?
After all, you have never done this and have no idea about installing this device. This article will help you solve your problem.
You can connect a WI-FI router in 2 ways:
- Wireless connection.
- Wired connection using twisted pair (a special network cable that comes with the router).
Choosing a router
The first step is to choose the right equipment. It is worth noting the fact that not all models Wi-Fi routers fit in, laptops. It is necessary to study the parameters of a computer or laptop and accordingly purchase a router with suitable characteristics. Before purchasing, check with the seller about the signal transmission range of the router.
Before purchasing a router, you need to clearly understand what kind of local network you need to build - for personal use in the apartment from all gadgets, or to build a powerful network with internal storage, in which they will be stored various files– music, videos, documents. In the first case, not very expensive models are quite suitable - within 1,500 rubles.
In the second case, you will need more powerful and expensive equipment, for which you will definitely have to prepare about 5,000 rubles, or even more. It is very important that the router has high performance, supports wireless standard IEEE 802.11n, supported gigabit speeds. You can read more about this in the corresponding article.
Router connection steps
If you plan to connect the router via a wired connection, then the sequence of your actions should be as follows:
Setting up a wired network
First, go to the menu, from there go to the “Network” tab (internet setup), and then click on the “Connections” tab (manual internet connection setup). Next, look at the screenshot.
In the “IP Settings” tab, assign a network address to the LAN ports, as well as a subnet mask. These settings must be specified in the Internet connection agreement. Or call your office and get this information from a specialist.
The router can be configured so that the network address can be obtained in automatic mode if it is connected to another router. Don't forget to click the "Save" tab.
Establishing a wireless connection
To install the router, in the router menu you need to go to the “Wi-Fi” (Wireless setup) tab. Then select manual wireless connection setup. Do everything as in the screenshot.
In this case, Wi-Fi is configured in 2 stages:
- Basic settings.
- Setting up network security.
We go to the main settings and in the “SSID” field you need to come up with and register Wi-Fi name networks. This name will be displayed on the computer in the list of all found networks. The next stage is choosing a country. Select the channel in which the data will be transmitted; it is better to leave it in automatic mode.
The next step is to select Wi-Fi standards; it is recommended to choose a mixed one. The final stage- choice maximum quantity clients who will be able to connect to the network. If you need to select an unlimited number of users, then select 0.
Be sure to set up Wi-Fi security to protect yourself from those people who like to surf the Internet at someone else’s expense. Here you need to enter a password to connect to the Internet. Go to “Security Settings”. In the top line you need to select the type of protection; it is better to give preference to WPA2-PSK, since this protection most resistant to hacking.
Enter the password in the “key” field. We leave the encryption settings at default. By clicking the “Change” button, the password is activated.
Be sure to save all settings and reboot the router.
If you did everything correctly, all indicators network connection lights are on on the router, then you can start using the Internet, everything works.
Have you already connected a wifi router?
Do you want to be smarter than others? Earn more? Read also:
- . Have you tried that?
- . It is advisable to always know how many pages are in the index.
- ? Or is it still not?