Remove the password with a flash drive on a laptop download torrent. Windows Password Recovery: Windows account password reset utility

6. What to do if

failed to reset windows password

Go to step 4 and try another program.

Windows stopped loading

Remove all disks and USB. Set BIOS to boot from HDD/SATA/SSD. As a last resort, start Windows Recovery or call the wizard.

We remind you that attempts to repeat the actions of the author can lead to the loss of the warranty for the equipment and even to its failure. The material is provided for informational purposes only. If you are going to reproduce the steps described below, we strongly advise you to carefully read the article to the end at least once. The editors of 3DNews are not responsible for any possible consequences.

Windows has long used the SAM system to store and manage passwords for all users. All information in it is well protected, so in order to find out the password, you will have to spend a lot of time and resources, especially if it is quite complex. Most often, however, it is not at all necessary to find out the password at all - it is enough to reset it or change it. Several utilities have been developed for this, one of which we will use. Another important point - it is obvious that when the OS is running, it will not allow you to just get into the password store. Therefore, you need to make sure that the computer supports booting from CD / DVD or USB media in order to run the necessary utilities.

The most famous of them is Offline NT Password and Registry editor, which can work with Windows XP/Vista/7 passwords and registry. Download the USB or CD version of the utility, burn the downloaded image to disk, or use our tips for creating a multiboot flash drive. The utility does not have a graphical interface, but you should not be afraid of this - everything in it is quite simple and understandable. In addition, often the desired option is offered by default, so you only need to press the Enter key.

Boot from removable media Offline NT Password and Registry editor. You are unlikely to need additional boot options, but in some cases you will have to empirically find those that will help the utility start. The next step is to select the partition number on which Windows is installed. You will have to focus primarily on its size. In principle, the program does not make any changes to Windows until the very last moment, so in case of an error, you can simply start the password reset procedure again.

Then the utility will ask you to specify the path to the folder where the SAM files are located (in fact, this is a registry hive). The default is X:/Windows/System32/config, and the program offers it at the beginning. Then you need to select the first item (Password reset), since we are going to reset the password.

Further everything is simple. Select the first item (Edit user data and password) and enter the username or ID in the format 0xabcd, where abcd is the RID listed in the first column. RID is useful if the username is displayed incorrectly or cannot be entered. For example, when using Cyrillic.

It remains to specify item 1 (password reset) or 2 (password change) for the selected user. Exit password editing mode by typing an exclamation point and pressing Enter.

Everything is almost ready. Enter q, press Enter, and then agree to the changes by typing y and pressing Enter again. We refuse further work in the Offline NT Password and Registry editor ( n), remove the flash drive or CD-ROM and press the cherished combination Alt + Ctrl + Del to reboot. Done - password reset!

This was an easy way to reset your Windows 7 password. It shouldn't be difficult. You just have to be careful and careful. Problems can arise only in the absence of the necessary drivers to work with the hard drive. Then you have to put them on a floppy disk (if, of course, you find a living representative of this almost extinct species and a working drive for it) or on a USB flash drive and at the first stage select the fetch additional drivers option.

For the second and third methods, you only need an installation Windows disk 7 and nothing more. A more complex option involves enabling the initially hidden "Administrator" account by editing the registry from the Windows 7 installation environment. In the future, you can log in under this account and edit any other account in the OS. By default, "Administrator" does not have a password, which only plays into our hands.

So, boot from the installation disk and press Shift + F10 to call the command line, where we drive in regedit and press Enter to launch the Registry Editor.

Highlight a section HKEY_LOCAL_MACHINE, and in the menu select “File” → “Load hive…” (File → Load hive…). We need to open the SAM file, which is located in the folder \Windows\System32\config on the partition where Windows 7 is installed. When you open it, you will be prompted to enter the name of the hive to be loaded - drive in any.

Now you need to select a section HKEY_LOCAL_MACHINE\hivename\SAM\Domains\Account\Users\000001F4 and double click on the key F. An editor will open in which you need to go to the first number in line 038 - this is 11. It must be changed to 10. Be careful and do not make a mistake - you only need to change it, without adding or deleting other numbers!

Now we need to select our bush HKEY_LOCAL_MACHINE\hivename\ and in the menu select "File" → "Unload hive ..." (File → Unload hive ...), and then confirm the unloading of the hive.

That's it, you can reboot by pulling out the pre-installation disk and log in with an administrator account. In the Windows Control Panel, in the User Management section, you can change the settings for another account. Including changing the password.

The last way is the wrong one. Why wrong? Because we will be engaged in the substitution of system files, and this is an ignoble business. What is the main idea? It's simple - by default, the sticky keys detection function is enabled in the OS. You have probably come across it at least once, and if not, then just quickly press Shift at least 5 times, and you will see such a wonderful window:

This window belongs to a small helper program sethc.exe, which lies in the Windows system directory. What's more, it even runs on the welcome screen when you're prompted to select a user and enter a password. But you can replace it with something useful. For example, cmd.exe. Naturally, not directly in the running OS, but by booting from the Windows 7 installation disk and pressing Shift + F10.

You need to start by determining the letter of the drive on which Windows is installed. The easiest thing is to simply view the contents of the partition root with the command dir. C: will most likely be seen as D:, but it doesn't have to be.

Having decided on the volume letter, we execute two simple commands - one copy the original file just in case sethc.exe to the root of the disk or wherever you like, and the second change it to cmd.exe.

Copy d:\windows\system32\sethc.exe d:\ copy d:\windows\system32\cmd.exe d:\windows\system32\sethc.exe

We reboot, quickly press the Shift key (or Ctrl, or Alt) several times and observe the command line window. In it, you need to enter one more command, substituting the name of the desired user and the new password, respectively. Other parameters of this command can be found in the official help.

Net user username newpassword

If you want to return everything to normal, then you need to boot from the installation disk again, open the console and run the command:

Copy d:\sethc.exe d:\windows\system32\sethc.exe

However, you can not restore anything, but leave such a small trick in the system just in case. In addition to the methods listed above, there are many other methods for resetting or recovering a password in Windows, but we will not consider them now. Once again, we urge our readers to be careful and careful when working with the internals of the OS, and even better not to bring the situation to a “surgical” intervention in SAM. Good luck with your account recovery!

The password is the most important tool to protect user data from being viewed and used by third parties. However, an unlearned password can also turn against the user himself. And if, for example, it is not difficult to recover the password from the account of any website, then questions may already arise with gaining access to the Windows account. But there is a solution, and that is the Windows Password Recovery utility.

In fact, quite a few users find themselves in such a situation as losing their Windows login account password. In most cases, users resort to a complete reinstallation of the operating system, which can be avoided by using the Windows Password Recovery utility to recover the password.

The Windows Password Recovery utility is an effective tool that allows you to recover or completely reset your password, as well as create a new administrator account or completely delete an existing one. The utility successfully recovers the password for Windows 10 and earlier versions of this operating system.

The progress of password recovery with the Windows Password Recovery utility:

1. First of all, the utility will need to be installed on any other working computer in order to create bootable media.

2. After launching the utility, you will be prompted to create a boot disk or USB flash drive. Please note that the trial version of the program can only create a bootable CD, and to create a bootable USB flash drive, you will need to purchase the full version of the program.

3. Go to tab "Advanced Recovery" , where you will need to select the version of Windows for the computer on which the password will be recovered.

4. Return to the first tab. You will see that a third item has appeared on the screen, allowing you to save the ISO image with the utility to your computer. Subsequently, you can create a bootable disk or USB flash drive using any other program that is convenient for you.

5. If you create a bootable disk (in the free version) through Windows Password Recovery, then you just need to click the button Next , and then Burn to start the program creating bootable media.

6. The progress of the process will begin, which will take several minutes.

7. Once the bootable media burning process is completed, a window will appear on the screen informing you of the success of the procedure.

8. Now, armed with bootable media, you will need to connect it to the computer on which the password recovery will be performed, and then enter the BIOS and set the disk or USB flash drive as the main boot device.

9. If everything was done correctly, the following window will appear on the screen:

10. After waiting for the utility to finish loading, on the screen you will need to select the disk with Windows, on which the password will be reset.

11. Select the account in which the password will be reset, and just below, select the appropriate action: remove password, change password, delete administrator account, create a new administrator account.

12. In our example, we are changing the old password to a new one, therefore, in the next program window, we will need to enter the new password twice.

13. After the procedure is completed, you just have to restart your computer in normal mode. Ready!

Features of Windows Password Recovery:

• The utility has a free version, but there is one caveat: it works purely in trial mode, not allowing you to delete and reset the password for Windows 8 and other versions of this OS, as well as delete the administrator account or create a new one. To perform these steps, you will need to purchase a paid version;
• The utility works with operating systems Windows XP and above;
• The utility successfully resets and recovers the administrator password for Windows 10 and earlier versions of this OS;
• Allows you to delete an existing administrator account or create a new one.

Windows Password Recovery is an effective tool for both ordinary users and professionals who repair computers. Despite the lack of support for the Russian language, the utility is extremely easy to use, and therefore it can be recommended to everyone to quickly gain access to a locked computer.

Today we will consider a situation that many computer users have already encountered and / or may still encounter. Namely, what to do if you forgot the password to turn on the computer. This can happen to anyone. You can also forget or lose a note with a password in a jiffy. Especially when this password often has to be changed, as some users do (for example, mothers trying to limit the time their children spend on the computer).

So, today we will consider one of the ways to effectively solve this problem. Of course there are many methods resetting or recovering (or cracking) a forgotten Windows login password or user unlock. Gradually I will add descriptions and others.

This method is distinguished by its versatility. That is, This method of resetting a forgotten password from a computer is suitable for various Windows operating systems : 2000, XP, Vista, 7, Server 2003, Server 2008, etc.

Let's use the utility.

Accordingly, in the first case, we write the image file to disk (we read how to burn the iso image to disk), in the second, we create a bootable USB flash drive (in this case, we simply copy all the files of their archive to a blank USB flash drive). Choose which option is more convenient for you.

After this is done, we insert our disk or USB flash drive into the computer (we need to boot from one of these media) and turn it on. If your operating system still starts up and asks you to enter a forgotten password, then you will have to do a little more magic to run the utility from a disk / flash drive. Read how to boot from external media.

If such a picture appears on the screen, then everything was done correctly, and you managed to load Offline NT Password and Registry editor from a disk / flash drive.

Click Enter and we are waiting. Now the program prompts us to select the partition on which the operating system is installed (in other words, where we will reset the password). The disk is selected by entering the desired number. On the screen, we are prompted how many sections the program sees at the moment, and what volumes they have. Actually, this is the only information available to us here about the sections, so we can only focus on it. But don't worry, if you select the wrong partition by mistake, the utility simply won't be able to clear the password and you'll be returned to this menu where you can enter a different partition number and try again.

In my case, two partitions are displayed: 1 - 10.7 GB, 2 - 5490 MB. If you remember how big your Local drive C , then choose a partition that has a similar size. I select section 1. I enter a number from the keyboard 1 and press Enter .

Next, you need to specify the directory where the file is located. SAM(keeping the registry branch). The program itself offers us a default directory ( Windows/System32/config ), where this file is usually located. We agree, click Enter .

Next, we are asked to choose what action we want to perform. Enter a number 1 , which corresponds password reset (password reset), and press Enter .

The next step is also to select the desired action. Enter a number 1 - change accounts and passwords (Edit user data and passwords ). Click Enter .

Before us appears a plate, which lists all usernames (Username) and them identifiers (RIDs) . The program prompts you to enter a username from the list for which you want to reset the password. The program immediately offered me Admin- It is on this account that I want to erase the password. So I just click Enter .

Retreat. Of course, you can enter another username, but it is probably better to unlock the administrator account, and only then change passwords for everyone who needs it.

If your username is written in Russian, then normally it will not be reflected due to the Cyrillic alphabet. In this case, instead of the username, specify it RID in the following form: 0xRID. That is, in my case: 0x01f4. Click Enter .

Now the program offers us the following options for the selected account: 1 - clear the password, 2 - change the password, 3 - make the user an administrator, 4 - unlock the account, q - exit and return to choosing an account. Enter 1 and press Enter .

Password removed! The job is done, it remains to exit the application. Enter exclamation mark and click Enter .

Enter q and click Enter .

We confirm the changes. Enter y and press Enter .

We refuse to continue working in Offline NT Password and Registry editor and enter n , then press Enter .

We remove the disk from the wire or the USB flash drive from the usb socket, restart the computer and enjoy the result. Windows login password reset!

Naturally, the article is intended to help those who really forgot password and would have no other choice but to reinstall the system. Under no circumstances is the information provided can not use for any harmful purposes.

Passwords help protect your account in operating systems from unauthorized users. However, it also happens that they are forgotten, and it is not possible to get into the system from the administrator account, and there is no installation media with you. In this case, you will have to reset the password with slightly non-standard methods.

Removing the password from Windows 7 without installation media

If you can’t download a password reset disk on Windows 7, then you can use one of the methods below. Both involve solving the problem using system utilities. To do this, you do not need to download a Windows 7 password reset disk or a full system image. However, it is recommended to strictly follow the instructions, since both methods involve working with the interface "Console".

There is no need to try to reset the password on Windows 7 using third-party software, as this will entail certain problems.

Method 1: Command line

This is the most versatile, simple and secure way to change your Windows 7 password without knowing the old one. If necessary, you can simply remove the new password from the operating system later. To perform this method, you will need the ability to log into the OS interface, even if it is from a guest account. Usually this is always the default.

The guest account has some limitations compared to the administrator account. By default, they apply to making any changes to the OS, for example, installing / removing programs, editing some documents, downloading content from the network. Use restrictions "Command line" no default.

The instruction for this method is as follows:

1. 1. Press key combination Win+R.
   2. In the line that opens, enter cmd and press Enter.

1. 1. will start "Command line". First you need to find out the number of users, their powers and logins in the operating system. To do this, enter the command net user and press Enter.

1. 1. A list of all operating system users will be displayed. You need to find the administrator account login. This will be easy to do if there are only two accounts in the OS.
   2. Now write the command net user admin_login new_password. Command example: net user Admin 123456 . Press Enter.

1. After applying the command, restart your computer and log into the administrator account with a new password.

Method 2: Recovery menu

This method can be dangerous, as it involves disconnecting the computer from power during operation. However, a single application should not cause much harm.

The bottom line is this:

1. 1. Restart your computer if it was on or turn it on if it was off.
   2. As soon as Windows starts loading, abruptly turn it off. For example, press the power button or unplug the power cable.
   3. Then reconnect the power and turn on the PC.
   4. Instead of the standard Windows startup, the screen should start Windows Error Recovery, that is, recovering from an error.
   5. You will be offered several options for starting the operating system. Select Launch Startup Repair. In the Russian version, it may be called "Start Boot Repair".

1. 1. The system will start loading. You may see a window asking permission to perform a system restore procedure ( System Restore). Cancel by clicking on Cancel.

1. 1. A restore error message will appear. Click on an item View problem details.

1. 1. A text file with a description of the problem will start. Here you need to click on File in the top menu. From the dropdown list, click on the item Open.

1. Will open "Conductor" Windows with access to all system files. You need to navigate to the following path: C:\Windows\System32.
2. Here find and rename one of these files utilityman.exe or sethc.exe, adding bak or old to the name of one of them. If these files are not displayed in the explorer, then in the column "File type" put a value "All files".
3. Now find the cmd.exe file. Copy it and paste it in the same directory.
4. Rename the copied file to "utilman" or "sethc". No need to rename the file to "utilman", if at the 10th step you added a postscript to the file "sethc" and vice versa.
5. Can you close "Notebook" and press Finish. After that, the system will reboot.
6. Wait for the Windows start screen to load and click on the icon "Special abilities" if you renamed the file to "utilman". If you renamed it to "sethc", then you need to press the key five times Shift.

This way you will have access to "Command line" without having any access to the system. In the interface "Console" you will have to do the following:

1. 1. If you do not know the exact name of the administrator account, then enter the net user command. It will display all data regarding system users, including their status.

1. 1. Now write this command: net user Administrator entry name new password. Command example, net user Admin 123456 . Press Enter.

1. Restart your computer and try logging in with the new password you set.

The considered methods help to reset the password on Windows 7 without using the disk with the OS image. However, it is recommended to create a system recovery image on USB flash drives (installation disk) and reset through it.