It usually happens that the Smart baby watch worked, and then suddenly stopped charging and turning on, i.e. "died".
The first thing you can do is change the charging cord and try charging the watch with another charger. It is advisable to always charge smart watches with a high-quality original charger from phones. If this does not help, then there are two main reasons why the clock turned off:
1. Weak battery.
We'll fix it. It is enough to change the battery and the clock will work.
Batteries can be ordered from our watch setting service. We ship by Russian post. You can order
2. Water ingress into the watch.
The child may not tell you this and may not even notice that drops or a jet of water have fallen on the watch. But the fact remains: Children's watches with GPS must be protected from water!!! If the watch does not turn on and the diagnostics showed that there is plaque and corrosion inside the watch, then you need to contact service center, where they will make anti-corrosion treatment of watches. The clock will come to life.
The photo shows that water got on the sensor of removal from the hand and corrosion passed
In our service center they know how to restore watches after water damage.
The photo shows traces of corrosion on the section of the button Smart baby watch q50. This disabled the clock.
In our service center, the entire surface of the watch was cleaned from traces of corrosion, and the watch started working.
After water gets in, it is better to replace the battery on the watch, because. short circuit if water gets in, it could bring it into disrepair
3. If replacing the battery did not help (this also happens!), Then you may have a defect in the motherboard (hardware).
If the warranty period has not yet passed, then you should contact the seller with a request to replace the watch.
To order a battery, send us a request on What’s app, Viber +7 909 538 35 35 indicating the watch model. We have batteries for button and touch watches smart baby watch.
We will promptly accept your order and send the battery by Russian post. Delivery to any city (5-7 days).
Sending batteries for smart watch throughout Russia. Delivery is quite economical (100 rubles)
When you receive the battery, you need to contact any service center for the repair of electronics (phones, tablets, etc.) and you will be replaced there very quickly.
The procedure for replacing the battery is not difficult, you need to unsolder and solder 2 wires. This can be done by any dad who has a soldering station at home or a master in the Electronics Repair Service Center. The cost of replacing the battery in a service center is about 300-500 rubles, depending on your city.
To order a battery - send us a request on What's app, Viber+7 909 538 35 35 with watch model
We accept orders around the clock!
It often happens that watches for children with GPS work, then they start to “keep” the charge less and less, and at some point they stop charging and turn on.
What to do in this case?
Change the watch charging cable and try to charge the watch with another charger.
If the watch does not start charging and working, there are several possible reasons:
1. Bad battery. In this case, a simple battery replacement will solve all the problems with the operation of children's smart watches. The battery can be replaced at our service center
2. Water (moisture) getting into the watch. This could happen by accident, and the child might not even notice it: while washing hands, in the summer while opening a soda bottle, while swimming in a pond, when the child did not take off his watch and went into the water with it, etc.
In this case, you must not scold the child and immediately contact. If this is not possible, it is necessary to unscrew the screws on the back cover and dry the watch with a hair dryer or fan, having previously coordinated these actions with the Seller (in case the watch has a valid warranty), despite the fact that this failure is not covered by the warranty case and must be paid.
After that, in any case, you must contact or.
There are difficult cases when water enters the watch, when corrosion damages motherboard. In this case, it is not always possible to repair the watch.
You can repair your watch yourself by ordering a battery from us. But we recommend that you do this only after making sure that the watch does not charge and does not turn on for this very reason.
Only by placing necessary equipment and experience can fully diagnose and repair watches.
Wear are good in many ways, however, like any technology, these gadgets have certain problems. It doesn't matter what's wrong with your watch Android Wear- lack of synchronization with a smartphone, too quiet notifications, rapid battery consumption - we found the answers. In this article, we'll walk you through the most common Android Wear issues and how to fix them.
If some google apps on your Android smartphone not updated, you may encounter a number of questions and problems regarding Android devices wear. Here is a list of applications and minimum required versions:
- Google PlayServices - 7.3.28 and above
- Google Search App - 4.0 and above
- Android Wear App - 1.1.0 and up
If you are pairing between an Android Wear watch and an iPhone, it is important that you meet the following requirements:
- iPhone 5 model or later
- iOS 8.2 and above
- Android Wear App 1.0 and above
Android Wear: Reset your smartwatch
As is the case with a smartphone, resetting Android Wear returns the smartwatch to its factory state (in terms of software, of course), deleting all settings and system data added during use. This option can be called an emergency way to troubleshoot Android Wear watches. So, in order to reset the clock, follow the instructions:
- touch touch screen to wake the watch from sleep mode.
- Swipe down from top to bottom (vertical swipe).
- Swipe from right to left (horizontal swipe) until you see the icon Settings(Settings). Click on it.
- Scroll through the settings menu until you find the option Reset device(Reset Device) and select it to reset.
After resetting the watch to factory settings, you will need to pair the gadget with your smartphone again.
Android Wear: How to pair your smartwatch with your smartphone
After you just bought an Android Wear smartwatch or did a factory reset, you will need to sync your gadget with your phone. So here are the instructions:
- By enabling the function Bluetooth on your smartphone, you will see a list of nearby devices. You can check the name of your watch on this screen.
- Click on the watch name in the list.
- You will see the pairing code on the screen of your smartphone and watch. Make sure the codes match.
- Click Perform pairing on the phone screen. You will see a confirmation message once the devices are synced. The process may take several minutes.
- After that, you can select the item on the smartphone screen Enable Notifications.
- Tap the Android Wear checkbox to have your watch show notifications different applications your smartphone.
Android Wear smartwatch won't sync with smartphone
One of the most common problems– Unable to pair smart watch and telephone. This problem is especially typical if several other devices via Bluetooth are paired with the phone.
If you suspect that this is the case, then disable one of the connections by going through the menu items Settings - Wireless networks -Bluetooth.
Android Wear battery issues
Another problem is that the battery drains too quickly due to Android Wear. Unfortunately, there are several reasons for this:
- Google Now. Disabling this service significantly saves battery power.
- Connection to specific WiFi networks also consumes battery.
- Some applications. To find the culprit, check on your smartphone which application is consuming energy.
Also, the problem can be solved by rebooting or resetting the clock and smartphone. In addition, Google recently admitted that there are bugs in the system itself that affect battery consumption, and you may have to humbly wait for the next update.
Android Wear smartwatch won't connect to phone
Such a problem can be quite annoying, especially considering that Android Wear was designed to work harmoniously with a smartwatch with a phone. We are looking for the reason for the connection loss according to the following list:
- Check if you accidentally turned off Bluetooth on your smartphone.
- If everything is ok with Bluetooth, then restart your watch and phone.
- Try disconnecting and reconnecting your smartwatch with android apps Wear on your smartphone.
- Clear the cache of the Android Wear app on your smartphone by going to Settings – Applications.
- Perform a factory reset.
Smartwatch on Android Wear stopped displaying notifications
Most likely, this error can be fixed by restarting the watch. Unfortunately, this problem soon returns, and the watch again stops receiving notifications from the smartphone. You can try pairing your watch and smartphone again and make sure you haven't accidentally turned off notifications.
In this article, we want to tell you about the features of charging smart baby watches (smart baby watch Q50, Q60s, Q80, Q90 (Q100)).
Some sellers claim that the watch cannot be charged from a computer, because. it will crash software and the only way to repair them is to contact the manufacturer. In fact, children's smart watches (at least ours) come with a 1-way cable, it is only for charging, not for data exchange, which means that the PC cannot affect the operation of the watch, and you can charge our clock from the computer.
Nevertheless it is recommended to charge the watch in the “gentle” charging mode(from a PC, laptop or charger with a capacity of not more than 1 amp.) If you charge the watch with a higher power charge, the battery will quickly fail. A new watch should be completely discharged and charged at least 5-10 times in a row in order for the battery to gain its capacity. At the same time, you should not allow the battery to completely discharge, because if the watch battery is completely discharged and turns off, then it may not be possible to charge the watch from a PC or laptop. In some cases, the watch battery needs to be started with a higher power charger. We recommend connecting the clock with its native cable through an adapter with a power of 1-2 amps. to the network or to a power bank ( power bank) to start charging the watch, and then reconnect it to your PC or laptop. You can also use a 1-2 amp charger to start, but pay attention to the length of the micro-usb, some chargers have a short micro-usb output and the watch does not accept it.
If you have followed the above recommendations, and the watch is not charging, then it is necessary to exclude damage to the native cable, so try different charging device. Leave the watch on charge for 10-20 minutes, as a rule it needs time to start taking charge.
You should also remember that when the watch runs out of power, it turns off, retaining a small charge, which is enough to respond to charging and start charging itself. It is important to explain this to the children so that they do not try to turn on the watch again, otherwise the battery will be discharged to such an extent that it will need to be charged by force (in a service center). There are no specialized service centers for repairing children's smart watches, but you can contact any electronics repair service center.
Handle your watch with care and enjoy!
Children's watches run out very quickly
Callback not working on children's watch
Video review of children's waterproof smart watches with GPS Smart Baby Watch GW400S (Smart Baby Watch V9 or DF25)...