PU 6 - good free program, which will help you prepare reports to the Pension Fund. But, like any program, PU 6 needs constant improvement. The developers post all improvements for the user in updates. PU 6 is no exception. You can download the latest 2018 version of the PU 6 program at the end of the page.
How can I find out which version of PU 6 I have installed?
This is quite easy to do. Go to the program and go to the “Service” menu and the most last point, which you will see will be “About the program”. Open it and you will see this window, in which it will be written what version you have.
How can I find out which version of the program is latest?
In the “About the program” window there is a special button that checks whether you have the latest update or not. The button is called " Check for updates" After you click on it. Check the program on the Internet new version and if it finds it, it will warn you that you have an old program.
Where can I download the PU 6 program?
In the previous paragraph, I wrote how to check whether there are updates for the program or not. After checking for updates, if the program finds them, it prompts you to go to the website to download the latest PU6 update. You can go and download from the Pension Fund website or you can do it from my website. I will leave a link to the latest version of PU6 below.
Documents PU 6 version 1.1.17.1035 from 02/13/2020 download the program for free | update
New in version 1.1.17.1035 from 02/13/2020:
* The field Profession, position has been added to the employee card (you can fill out the field either from the position directory, or simply enter the data in the specified field (in this case, the data will be saved in the position directory if such a position has not yet existed)), you can simply delete the position by clearing field.
* When adding a new event for an employee in the SZV-TD Form, the Position and Structural unit fields from the Employee’s card are automatically filled in, if they were filled in
Fixed: When selecting a department from the employee data editing window, the incorrect Policyholder ID was transmitted.
The size of the Name fields has been changed to 250 and Code to 20 characters in the Structural division directory
Checking information
The program developers report:
To check forms ODV-1, SZV-STAZH, SZV-ISKH, SZV-KORR, SZV-M, you must use the PD software verification program. Download on this .
To check forms RSV-1+Section 6, you must use the CheckPFR 1.1.28 verification program dated 12/07/2015 or later.
Other downloads
Download additional programs or components that may be required for the program to work correctly (some of them are present in the new installer):
Microsoft Visual C++ 2010 x86 (Necessary for the application to work; if not installed, an error will be displayed at startup about a problem with access to the Sqlite database driver)Instructions and Guides:
Documents PU 6 - a free program, developed by the Pension Fund of the Russian Pension Fund of the Russian Federation (for the Komi Republic), designed for the generation of individual (personalized) accounting documents by the policyholder, in accordance with the instructions for filling out the forms of individual (personalized) accounting documents in the State Pension Insurance system, approved by the resolution of the Board of the Pension Fund of the Russian Federation and preparing them for submission electronically to territorial body Pension Fund of the Russian Federation. The program was released in 2016 and replaced the Documents PU 5 program.
In connection with changes in the legislation of the Russian Federation, etc., the Documents PU 6 program is constantly updated and new versions of the program are released taking into account the changes. In this regard, it is important to work and submit reports at the latest current version programs.
The program contains detailed instructions for work. Opens from the Tools - Help menu.
Main functions of the program Documents PU 6:
Preparation of individual information on work experience, earnings (remuneration), accrued and paid insurance premiums of the insured person (forms SZV-6, SZV-6-4, SPV-2, RSV-1 Pension Fund (from 2014))
Preparation of calculations for insurance premiums using forms RSV-1, RSV-2
Grouping documents into bundles in accordance with the requirements of the “Instructions for filling out document forms by a person for individual (personalized) registration in the state pension insurance system”
Output of information on paper and magnetic media for submission to the Pension Fund authorities
Printing various accompanying documents
Additional program features:
Simultaneous maintenance of several databases
The database can contain information on any number of Policyholders
Import into the Database of forms SZV-6, SZV-6-4, SPV-2, RSV-1 PFR (since 2014):
- from XML files (format 7.0), prepared in accordance with the “Rules for the preparation of personalized accounting documents in electronic form”
- from DBF files of a certain structure
Administration, logging of program user actions
Hardware requirements: The client must satisfy the recommended system requirements for Microsoft Internet Explorer 6. Printer: any of those used with this computer. Monitor: SVGA, recommended resolution 1024x768, but not less than 800x600. Color depth: at least 256 colors. Preferably more, for example, High Color 16 bits or True Color 32 bits.
Additional requirements:
· Make sure that the "small font" option is set in the screen settings (access: "Desktop" properties (menu item on the right mouse button) - "Settings" tab - [Advanced] button - "General" tab - "Font size" field )
· If the program is supplied on CDs, a CD-ROM drive is required for installation. If the computer works as part of local network and installation can be carried out from another workplace, on this computer No need to have a CD drive
· To output data to magnetic media, the computer must include a floppy disk drive magnetic disks. If the computer operates as part of a local area network, data can be output to another computer that includes such a drive
Main program window
Good afternoon dear friends! Today I want to tell you how to update “PU 6 Documents”. “PU 6 Documents”, great program for drawing up reports to the Pension Fund. But forms and forms of reports are often updated; in order for the program to have new forms and forms, you need to update the program manually. In order to do everything correctly and your data is not damaged or lost, I will tell you how to update “PU 6 Documents”. Repeat after me and your reports in the program will not be lost!
How to update “PU 6 Documents”
If you are unable to solve this problem yourself, then you can go to the section and our specialists will help you.
Let's download the update, unpack it and run it.
You can download the latest version of the program “” here.
If you don't know how to unpack a file, then read how to do it here.
Before updating the Documents PU 6 program, I recommend that you do backup copy Your database. You can read how to make a backup copy of the Documents PU 6 program here.
Run the installation file.
Now carefully read the terms of the license agreement. If you agree with it, then put a tick in the “I accept this agreement” box. Then the “Next” button will become active, click it.
Now we need to find out in which folder to install the update. This is done very simply. Click on the shortcut to the “PU 6 Documents” program and select “File Location”.
The folder with the program will open, in it we can see the path where our program is installed. ATTENTION! Your path may be different!
Now I know that my program is installed in the path “C:\Program Files\PU-6 Documents”. This means we will install updates in the same folder!
We check the path, if everything is correct, then click “Next”. If you need to change the path, then click the “Select...” button and specify the desired folder.
Now you can continue working in the updated program.
If you need professional help system administrator, to resolve this or any other issue, go to the section and our employees will help you.
Now you know how to update “PU 6 Documents”.
If you have any questions, ask them in the comments! Good luck and good luck to everyone!
To be the first to receive all the news from our website!
Documents PU 6 is a narrow-profile software, developed specifically for the generation of documentation submitted to Pension Fund RF.
Possibilities
PU 6 documents should be used to compile information from the insured person. Using this software, you can create and fill out documents with data on the work experience of the person who received the insurance certificate, his salary, and contributions paid. This implies the use of forms S3V-6, S3V-6-4B, SZV-STAZH, SZV-M, RSV-1 PFR and SPV-2, ADV-1, ADV-2, ADV-3, as well as RSV-1 and RSV -2 to generate separate premium reports.
Despite the fact that the Documents PU 6 software was released quite recently and replaced the previously used PU 5, it has less powerful functionality than its predecessor. For example, in the new version it is not possible to connect a Database from previous version. To perform these steps you will have to use import using dbf files or XML. Correctly executed electronic papers, formed into categories in accordance with established standards for filling out forms, as well as various accompanying documentation, can be printed or recorded on disk media.
Features of work
For the software to work correctly, installation of additional software is required. The computer from which documents will be filled out must have .NET Framework 4 installed, as well as Microsoft Visual C++ 2010.
Key Features
- preparation of documentation on work experience, salary individual, as well as his contributions - accrued and repaid;
- support for forms SZV-6, SZV-6-4, ADV-1, ADV-2, ADV-3, SZV-M, SZV-STAZH, SPV-2, RSV-1, DSV-3 and many others;
- database import from Document PU 5 is supported (from XML or DBF files);
- requires installation of .NET Framework 4 and Microsoft Visual C++ 2010;
- supports Windows ranging from XP – Windows 10;
- saves documentation to disks and prints them;
- keeps a log of operations performed in the program.
Good afternoon dear friends! Today I want to tell you how to transfer PU 6 to another computer. What is it for? There are different reasons. For example, you need to work at home, after work or on weekends, and entering all the data into the program on a new computer is a complex and time-consuming procedure. Therefore, it is easier to transfer the entire program or database. And today I’ll tell you how to do this. Let's get started!
How to transfer PU 6 to another computer. Fast way
If you are unable to solve this problem yourself, then you can go to the section and our specialists will help you.
The easiest option is to copy the program folder. The PU 6 program requires installation on a computer only once; then it can be transferred to other computers without installing it. But this method is exclusively a temporary measure. If you try to update the program documents PU 6, which was not installed on the computer, but which was simply transferred, errors may occur during the update. Agree, we don’t need errors during updating. But still this method working and can be used.
The whole process consists of simply copying the program folder from one computer to another. We just need to find out where our program is installed. This is done very simply. Find the shortcut for the program Documents PU 6 and click on the shortcut right click mice. Next, select “File Location”.
The program folder will open.
Let's look at the path. My path is C:\Program Files\PU-6 Documents. Yours may be different. Now we need to go up one folder. That is, go to the C:\Program Files folder. And there we will see the folder we need with “PU-6 Documents”. We will copy it to a flash drive.
Then we will need to copy the program folder to any location on the new computer. After that, you can start working in it.
This completes the quick way to transfer PU 6 to another computer.
How to make a backup copy of the “Documents PU 6” program database
Now we will make a backup copy of the “PU Documents 6” program database. We will need this copy a little later. But we definitely need to learn how to do it. Make backups as often as possible. If your computer breaks down, or the program itself breaks down, you can always restore all your data from this backup copy. The more often a copy is made, the more data you can recover.
Let's open the program and go to the "Tools" menu, then you need to select " Database Manager».
The window “ Database Manager" Click “Archive”.
The window “ Backup and database restoration." In this window we need to click the “Create” button.
After this, a backup copy of our database will be automatically created. And you should see an entry about this in the “Database Backup and Restore” window.
Let's scroll through the window with a list of backups. You will see the "Location" column. This is the path to our backup. Let's remember this path!
This completes the creation of a backup copy of the “Documents PU 6” program database.
Let's move on to the next point.
How to transfer PU 6 to another computer. Restoring a backup
Let's move on to a longer, but more correct method of transferring PU 6 to another computer.
Let’s imagine that the second computer does not have the “PU Documents 6” program.
Download the latest version of “PU Documents 6”. You can download it here.
Install the program. If you don’t know how to install “PU 6 Documents”, then read here.
Installed? Great! Now we need to restore the database. This is where we need our archive copy that we just created!
We copy our archive copy to a flash drive. We can see the path to the archived copy in the previous paragraph. Remember, you scrolled the window to the “Location” column, that’s where our archive copy lies. Let's copy it from there!
Now we copy our copy to new computer, to any place.
Let's move on to the program. Open the “Database Backup and Restore” window again. Click the “Add” button.
A window will open in which we need to select our backup. Select and click " Open".