Windows installation 10 per MSI devices As a rule, it is needed by those who are not satisfied with the pre-installed factory operating system. This process, despite its apparent simplicity, turns out to be full of nuances of the MSI devices themselves.
How to install Windows 10 on MSI?
The first thing you need to do is make sure that the laptop, all-in-one or computer boots from a USB drive or DVD-Rom. To do this we go to the BIOS settings:
- start the switched off device;
- at the moment when the inscriptions appear on the black screen, press the “Del” or “F2” buttons on the keyboard many times;
- after that you will see blue screen with the menu, this is the BIOS;
- go to the point “ Boot Menu»;
- in the “First boot device” subsection, select the item from which we will install Windows 10 on MSI (depending on the type of device - USB flash drive or CD\DVD-Rom);
- if you don’t see the flash drive, look in the “Hard Drive, HDD” section, sometimes it appears there;
- after that, press the “F10” button on the keyboard, saving all changes.
- insert the disk or flash drive and wait for the system to display the installation start screen;
- and then everything is intuitive, just follow the installer’s instructions.
Installing Windows 10 at MSI Service Center
If you follow the instructions described above, then everything seems quite simple, but every time users encounter various kinds of difficulties, such as separation hard drive into partitions, creating an active partition, formatting, checking for errors and much more. Each of these processes can cause a lot of trouble and even lead to data loss and failure of the HDD or SSD. Therefore, for the favor Windows installations For MSI devices, it is better to contact the professionals of our service center. Our specialists install systems several times a day, have extensive experience and are ready quickly, accurately, and efficiently install and configure licensed Windows on your MSI, install drivers and any programs at the client’s request, including office packages. We can also set up Internet and Wi-Fi.
In fact, the method of reinstalling Windows on a laptop is not much different from reinstalling it on a desktop computer, but there are some points. There are two types of laptops:
- With Windows pre-installed
- Without her
In general, laptops are not sold without an OS, but often it can be the free Meego OS, which is installed instead of Windows to make the computer cheaper. After all, when purchasing, the price of the laptop includes the price copies of Windows, which raises the cost by 500-1000 rubles.
If you do not have a pre-installed licensed OS on your laptop in a hidden section, then use a universal one, which is also suitable for pirated copies.
But there are also advantages to pre-installed Windows - you can run a system restore to install a licensed OS from a hidden hard section laptop disk. Owners of laptops without Microsoft OS are deprived of this opportunity. 3 options for how to restore Windows on a laptop:
- For laptops with Win of almost all models, in the Start menu there is software from the manufacturer for system recovery. They are called differently, you can distinguish them by their name - something about Recovery. You will be offered several ways to restore the OS, as well as reinstall Windows and bring the laptop to its original factory state.
- On almost all laptop models, immediately when you turn it on, you can see something like “Press F2 for Recovery”. If you don’t see anything like that, then look carefully at the moment when the manufacturer’s logo appears on the screen. This will allow you to start recovery instead of loading Windows. operating system.
- On laptops with Windows 8, you can go to “Computer Settings” - “General”, then find “Delete all data and reinstall Win”. The operating system will be reinstalled automatically, plus all necessary drivers and other pre-installed software that was included in the system at the time of purchase.
Starting a reinstallation from a licensed Windows recovery on a laptop
If you did not reinstall Windows on a pirated copy, and did not remove hidden sections with HDD, then you can use the built-in function to return the laptop to its factory state, which is essentially reinstalling the OS.
To start Windows recovery, you need to press special keys during boot (when the manufacturer's logo is visible), look for an inscription like Press F2 for Recovery. Basically these will be the following keys depending on the manufacturer:
- MSI - F3.
- Samsung – F4, or run Samsung program Recovery Solution III from OS.
- Fujitsu Siemens and Toshiba – F8.
- ASUS - F9.
- Sony VAIO and Packard Bell– F10.
- HP Pavilion, LG and Lenovo ThinkPad – F11.
- Acer - Alt+F10.
Restoring the laptop to its factory state
So, to reinstall Windows on a laptop using recovery, do the following. Let's consider performing an operation on an Acer laptop.
When the Acer logo appears, press Alt and F10. To avoid missing a moment, press them several times.
- The recovery program window will appear on the screen. A password may be required, if you did not set one, then use the factory passwords: 000000, 00000000 or AIM1R8.
- Select "Full recovery...". All data from drive C: will be deleted, save the necessary information from it in advance. If you need advice on how to do this correctly, then read the “Data Saving” section in our.
- Next, you should read what you are informed and warned about.
- Make sure the correct drive is selected.
- Agree to begin the operation.
- The process of restoring the OS on a laptop takes about 15-20 minutes.
This is several times less than usual reinstalling windows on a laptop, especially considering the installation and settings of some utilities from the laptop manufacturer that come with a pre-installed licensed OS.
- The operation was completed successfully. Click “Ok, the computer will reboot and you will be logged into the reinstalled OS.
In another model of mobile PC (HP, Asus, Lenovo, Samsung, etc.), the program for restoring and reinstalling Windows may differ, but the essence is the same. You will receive a fully working laptop in the same software condition as when you purchased it.
Purchased new computer without software? Do you just want to change your existing operating system? Problems with Windows(freezes, won’t load, viruses are swarming)? You understand (or guess) that a reinstallation is needed or installing Windows 7, 8, XP on MSI laptop, but how to do this remains a mystery to you?..
In such situations, we advise you to contact specialists (our gsmmoscow service center). In principle, some people do this themselves, but if you are a superficial user (type, watch movies and listen to music, play, and that’s almost all), then it is better to turn to specialists. And although this is not an extremely complicated procedure, a person who has never done this may miss some points, during which useful data may be lost or certain programs may not start.
We use exclusively licensed programs, and if you consider it necessary to be present during their installation, we will be only too happy.
How long does it take to reinstall Windows 7, 8 or XP on an MSI laptop?
So the moment came when reinstalling Windows 7, 8, XP on an MSI laptop with drivers and applications used is inevitable. For dummies, reinstalling the OS takes a lot of time, which is not surprising, because... needs to be saved somewhere important settings, then remove all applications and the system (you must first format the disk, copying all important information from it in advance), then reinstall Windows, drivers and applications.
In the same time reinstall Windows 7, 8, XP on Msay laptop in the service center it will take you no more than 1.5 hours (during this time you do not worry that something will go wrong and, if you wish, you can go about your business).
The cost of reinstalling Windows 7, 8, XP on an MSI laptop or restoring the operating system.
As for the installation cost, install Windows 7, 8, XP on MSI laptop will cost our clients RUB 1,500.00. The indicated price includes the following services:
1. installation of Windows;
2. installing drivers;
3. activation of the operating system;
4. performance testing.
At the same time, saving data from laptop disks MSI We conduct it free of charge, with the exception of cases where the data contains errors or viruses.
We also offer services such as “virus removal” (removal of viruses and banners, checking for viruses, installation of antivirus programs) and “recovering data” that has been damaged. Services are paid, the cost is determined after a free diagnosis.
We also do Windows 7, 8, XP recovery on MSI laptop.
It is no secret that the cost of information located on media can be several times more expensive than the cost of the media itself, and therefore the main task is not only recovery of Windows 7, 8, XP on MSI laptop, but also the recovery of user data.
Most often, people turn to us for OS recovery when there are incorrect entries in the MBR and damaged system files.
In our workshop zhsmoskov operating system Your laptop will be restored very quickly; depending on the complexity of the problem, it takes from 40 minutes to 1.5 hours.
How long will it take to replace components on an MSI laptop:
We are a wide-ranging service center, and therefore if the laptop Msay If you have problems with the keyboard, screen, matrix or other parts, you can safely contact us. We have a large assortment of parts in stock, which allows us not to waste time ordering the necessary components, and therefore the time required for repair depends only on the model and the complexity of disassembling the laptop. As a rule, fixing simple breakdowns takes no more than half an hour, but complex ones can take up to 3 hours.
Let's consider the process BIOS settings laptop MSI VR610X if you need to install an operating system Windows systems 7 or Windows 8 from a USB device, that is, a flash drive, or from a disk.
The flash drive or disk must be previously installed in the USB port or CD/DVD drive, respectively.
We turn on the laptop. During the system boot process, press the “Del” key. It is located on the lower right numeric keypad.
Let's get to the main point BIOS menu-A. Go to the “Boot” tab. Select the second line vertical menu"Boot Device Priority". See the image below.
Press the “Enter” button. Let's go to the next window.
Here we see a list of devices. The laptop will search for and load the operating system on devices in this order.
If we are going to install the operating system from a flash drive, then we need to move the USB device to the first line of the list. If we install the operating system from a disk, then we need to move the CD/DVD drive to the first line.
In the image below, the USB device and CD/DVD drive are marked 1 and 2 respectively.
In order to move the device we need to the first line, go to the line “1st Boot Device”. Then press the “Enter” button.
A new window will appear, like the image below. In this window, select the desired device. Press the “Enter” button again.
We go to the main BIOS menu. Go to the “Exit” tab. We check that the first line “Exit & Save Changes” is active. Press the “Enter” button. In the next window, check that the “OK” on-screen button is active. Press the “Enter” button. See the image below.
The computer will automatically begin to restart. After rebooting, a window will appear as in the image below. You can install Windows 7 or Windows 8.
There is another way to select a device from which you can download (install) the operating system. This method is much faster than the previous one.
Here, too, the flash drive or disk must be installed in advance in a USB port or CD/DVD drive.
We turn on the laptop. During the system boot process, press the F11 button.
A window will appear. In this window, select the device from which we want to install the operating system. See the image below. A window is marked on it and our devices are marked with arrows.
Having selected the device, press the “Enter” button. The computer will automatically begin loading the operating system.
com-service.ru
How to enter BIOS? (all options)
Many users who have laptops or computers, or maybe all together, may encounter problems entering the BIOS. They still clash, so you need to figure out how to enter the Boot Menu. The instructions will not be for one specific computer. I will try to describe as many models of laptops and computers as possible. If you don’t know what a BIOS is, read the article about it here.
Also, if you do not understand this topic at all, then I do not advise you to go there without certain knowledge, since this can lead to serious problems. Let's finally get down to business.
In order to enter bios on desktop computer, usually, when turning it on, you need to press the DEL (Delete) key. In general, you should see the following inscription: Press DEL to run Setup... or Press DEL to Enter Setup... And quickly press DEL.
This entry option is found on motherboards ah in 90% of cases. It happens that when entering you need to press either F1 or F2. If you didn’t manage to click in time, you will have to do the procedure again, restart the computer and try to click again. With systems installed on SSD drives this is quite difficult to do. For those who don't know, read the article about SSDs. In general, we talked about computers. Now let's move on to laptops.
From a laptop, logging into Bios is almost no different from the instructions described above for regular PCs, you just need to press different buttons. The only difficulty may be that the device boots up very quickly and you don’t have time to press the right key. On some models, you can press the Pause key to pause the system boot. So, most often, the F2, F10, F12 keys are used to enter the BIOS from a laptop. The most rare case is keyboard shortcuts such as Ctrl+Esc or Ctrl +S, etc.
To enter the BIOS UEFI you press the same keys, nothing special.
Now I will describe the BIOS entry for several laptop models.
Acer laptops– you need to hold down the F1, Del or F2 keys
Lenovo laptops– usually F12, if that doesn’t help, try F1 or F2
Asus laptops– for most models, the Esc key. Models that begin with x or k use the F8 key.
Acer PC – Ctrl+Alt+Esc or F1 keys
Toshiba laptops – F1 or Esc key, sometimes F12
Lenovo laptops (older models) – Ctrl+Alt+Ins, or Ctrl+Alt+F3, or Fn+F1
Sony laptops – F1, F2, or F3 keys
HP laptops – F9 keys, or first Esc and then F9
Samsung laptops – Press and hold the Esc key
Asus motherboards – F8 key
Intel Motherboards – Esc Key
MSI Motherboards – F11 Key
Gigabyte motherboards – F12 key
Dell laptops – Press and hold the F12 key.
Older Dell models - Fn+Esc or Fn+F1 keys
Select Dell Models – Press the Reset button twice
Award BIOS - Del Key
ARI – Keys Ctrl+Alt+Esc, or Ctrl+Alt+Del
ALR – Keys Ctrl+Alt+Esc, or Ctrl+Alt+Del
AMI (old versions) – F2 or F1 keys
AST – Keys Ctrl+Alt+Esc
Compaq (older PCs) – F1, F2, or F10 or Del key
Compaq (some models) – F10 key
DTK – Immediately after switching on, press the Esc key
Cybermax – Esc key
EISA – Key combination Ctrl+Alt+S, or Ctrl+Alt+Esc
Fujitsu (some models) – F2 key
eMachines (Some models) – Tab or Del keys
Older eMachines – F2 Key
Hewlett-Parkard (HP) – F1, F2, Esc, F10, F12 key This is for models such as HP Pavilion, Vectra, TouchSmart, OmniBook, etc.
Older IBM Models - F2 Key
IBM ThinkPad (newer models) – Hold F1 key
IBM ThinkPad (older models) – Ctrl+Alt+Ins keys with cursor to the right top corner
Mircon – Keys F1, F2, or Del
Sharp - F2 Key
NEC – F2 keys or hold down F1 key
Shuttle – F2 or Del keys
Microid Research MR BIOS – F1 Key
Olivetti PC Pro – Keyboard shortcut: Ctrl+Alt+Shift+Del
Phoenix BIOS - Del keys. For older models: Ctrl+Alt+S, Ctrl+Alt+Ins, Ctrl+S, Ctrl+Alt+Esc
Packard Bell - F1, F1 or Del keys. For older models: Press the Del key
Tandon –Keys Ctrl+Shift+Esc
Zenith – Keys Ctrl+Alt+Ins
Tiget – Esc or F1 keys
ReverBook - Del Key
As you can see, I have described quite a lot of options for entering the BIOS with various computers, laptops and motherboards, save these instructions so you don’t forget how to enter the BIOS.
Http://computerinfo.ru/kak-vojti-v-bios-vse-varianty/http://computerinfo.ru/wp-content/uploads/2015/08/How-to-enter-BIOS.jpghttp:// computerinfo.ru/wp-content/uploads/2015/08/How-to-enter-BIOS-150x150.jpg2015-08-24T13:09:09+00:00EvilSin225Windowsbios,BIOS UEFI,entering BIOS,how to enter BIOS, how to enter the BIOS on a laptop Many users who have laptops or computers, or maybe all together, may encounter problems entering the BIOS. They still clash, so you need to figure out how to enter the Boot Menu. The instructions will not be for one specific computer. I will try to describe how...EvilSin225Andrey Terekhov Computer technology 
computerinfo.ru
How to enter the BIOS, how to set, remove and change the BIOS password for the MSI VR610X laptop.
Let's look at how you can set, change or remove a password for entering the BIOS on an MSI VR610X laptop.
We turn on the laptop. During the boot process, press the “Del” key to get into the BIOS. The button is located at the bottom right of the numeric keypad.
In the main BIOS menu, go to the “Security” tab. The first two lines indicate that no password has been set.
Go to the third line of the menu “Change Supervisor Password”. Press the “Enter” button. A small context window “Enter New Password” will appear. See the image below.
Here we enter our password. Press the “Enter” button. A similar small context window “Confirm New Password” will appear. Picture below.
In this window, enter our password again, confirming it. Press the “Enter” button again.
In the next window, press the “Enter” button again.
Now you can see that the inscription opposite the first line has changed from “Not Installed” to “Installed”. This indicates that the password has been set.
We go to the main BIOS menu. Go to the “Exit” tab. We press the “Enter” button twice to save the changes to the password that we have made.
The laptop will automatically reboot.
During boot, press the “Del” button again to return to the BIOS.
A window will appear like the image below. In it, the computer asks you to enter a password to get into the BIOS.
Enter the password and enter the BIOS menu.
In the main BIOS menu, go to the “Security” tab. We go down to the third menu item “Change Supervisor Password”. Press the “Enter” button. A new window will appear in which you must enter a new password. See the image below.
Enter a new password. Press the “Enter” button.
If you want to remove the password, then instead of entering a new password in an empty space, press the “Enter” button.
A window will appear indicating that the password has either been changed or removed. Press the “Enter” button again.
We go to the main BIOS menu. Go to the “Exit” tab again. We press the “Enter” button twice, thus again saving the changes we have made.
The laptop will reboot.
To check the changes, you can try to enter the BIOS again by pressing the "Del" key. Now the laptop will either immediately enter the BIOS if you removed the password, or ask you to enter the changed password.