Not long ago, the new Windows 10 OS was released. Now it is very popular, because Microsoft program I tried my best this time. The OS is attractive to look at and has many advantages. And its installation does not take too much time, but it collects personal data. How to partially disable Windows 10 surveillance is described here.
But some problems still arise. For example, sometimes during installation a window pops up with a mysterious inscription: “Not found required driver carrier at Windows installation 10". What could this mean? Now we will find out everything.
There are several reasons why this problem suddenly occurs, namely:
- During installation installation disk was extracted;
- The optical media is not of the best quality;
- The disk speed is too high;
- The drive cannot read the installation optical media;
- If the installation occurs using an ISO file, then it is damaged.
True, do not despair, there are several ways to solve problems.
It is recommended to use a flash drive to install a new OS. Firstly, there will be no problems if the optical media suddenly turns out to be of poor quality or of high speed. Secondly, it is much more convenient and faster to do.
Creating a bootable flash drive is very easy. For more information, follow this link on how to create a bootable USB flash drive. You will need a flash drive, ISO file and special program called UltraISO. It is considered the most convenient utility. You can find it here: http://ultraiso.ru.softonic.com/.
Writing a flash drive takes several steps.
Then you need to run the above program. Just keep in mind that the flash drive should already be connected to your device at this moment.
Review the program carefully. IN top menu There is a "Boot" option. We will need exactly this one. There, select the item indicated in the screenshot.
In the window that appears, specify the item for the ISO file. Next, just click on the appropriate button. This process will take some time.
After all, you can try to install a new OS on your device with peace of mind using a newly created bootable USB flash drive. But it's best to connect it to USB input 2.0.
If you still want to use optical media, then you need to choose it correctly. Seek help from a consultant if necessary. After all, for installation you need a high-quality disk.
In addition, you should pay attention to the recording speed. It should be low.
It is best to use DVD-R for such purposes.
But choosing the right optical media is not enough. You should also burn the installation disc correctly.
We will need the same program that was used to create the installation flash drive. It can also create a disk image.
Please note that before starting the operation, you should make sure that the optical media is in the drive. Only after this can you open our program.
This time you will need the "Tools" menu. Select the very first item indicated in the screenshot.
Next you just need to specify some settings. First, specify the disk volume in which the optical media is located. Secondly, the save path where you can find the created image. Thirdly, you need to choose the image format.
After all the steps, click on the “Make” button. The utility will create a disk image on its own, we just have to wait a little.
After some time, you will be able to install Windows 10 on your computer.
Thus, if an error occurs during installation “The required driver was not found...”, then the whole problem is concentrated in the installation disk. All you have to do is replace it with a new optical media or bootable flash drive. Images are created in a couple of clicks and take a couple of minutes, so don't be afraid of it.
it-increment.ru
Required media driver not found during Windows installation - error correction
When installing Windows 10, 8 and Windows 7 on a computer or laptop, the user may encounter errors “The required media driver was not found. This could be a driver for a DVD drive, USB drive, or hard drive"(during installation of Windows 10 and 8), "The required driver for the disk drive was not found optical disks. If you have a floppy disk, CD, DVD, or USB flash drive with these drivers, insert this media" (when installing Windows 7).
The text of the error message is not particularly clear, especially for a novice user, because it is not clear what kind of media we are talking about and one can assume (incorrectly) that the problem is in the SSD or the new hard drive on which the installation is taking place (more about this here: Not visible HDD when installing Windows 7, 8 and Windows 10), however, this is usually not the case and the problem is different.
Basic steps to fix the “Required media driver not found” error, which will be described in detail in the instructions below:
- If you are installing Windows 7 and doing it from a USB flash drive (see Installing Windows 7 from a USB flash drive), connect USB drive to the USB 2.0 connector.
- If the distribution disc is recorded on DVD-RW, or has not been used for a long time, try recording it again boot disk with Windows (or it might be better to try installing from a flash drive, especially if you have doubts about the full functionality of the drive for reading discs).
- Try burning the installation USB flash drive using another program. For example, relatively often (for unclear reasons) the error “The required driver for the optical drive was not found” is seen by users who burned a USB drive in UltraISO.
- Use another USB drive, delete partitions on the current flash drive if it contains several partitions.
- Download the Windows ISO again and create an installation drive (the problem may be a damaged image).
The root cause of the error The required media driver was not found when installing Windows 7
The error “A required media driver was not found” during the installation of Windows 7 is most often caused (especially recently, as users update computers and laptops) by the fact that bootable flash drive For installation, it is connected to a USB 3.0 connector, and the official OS installer does not have built-in support for USB 3.0 drivers.
A simple and quick solution to the problem is to connect a USB flash drive to USB port 2.0. Their difference from 3.0 connectors is that they are not blue. As a rule, after this the installation occurs without errors.
More complex ways solutions to the problem:
- Write drivers for USB 3.0 to the same flash drive from the official website of the laptop manufacturer or motherboard. Provided that these drivers are there (they may be part of the Chipset Drivers), and they must be written in unpacked form (i.e. not as an exe, but as a folder with inf files, sys and possibly others). During installation, click “Browse” and specify the path to these drivers (if the drivers are not on the official websites, you can use the Intel and AMD websites to search for USB 3.0 drivers for your chipset).
- Integrate USB 3.0 drivers into a Windows 7 image (this requires a separate guide, which I have on this moment No).
"The required optical drive driver was not found" error when installing from DVD
The main reason for the error “The required driver for optical drives was not found” when installing Windows from a disk is a damaged disk or a poorly reading disk. DVD drive.
At the same time, you may not see any damage, but on another computer installation from the same disk occurs without problems.
In any case, the first thing you should try in this situation is to either write a new boot boot Windows disk, or use a bootable USB flash drive to install the OS. The original images for installation are available on the official Microsoft website (instructions on how to download them were given above).
Using other software to burn a bootable USB drive
Sometimes it happens that a message about a missing media driver appears when installing Windows 10, 8 and Windows 7 from a flash drive recorded by some specific program and does not appear when using another one.
Try:
Problems with bootable USB flash drive
If the points indicated in the previous section did not help, the problem may be in the flash drive itself: if possible, try using another one.
And at the same time, check whether your bootable flash drive contains several partitions - this can also lead to such errors during installation. If it does, delete these sections.
Additional Information
In some cases, the error may also be caused by a damaged ISO way(try downloading again or from a different source) and more serious problems (for example, malfunctioning RAM can lead to data corruption when copied), although this rarely happens. However, if possible, it is worth trying to download the ISO and create a drive to install Windows on another computer.
On the official Microsoft website is also present own instructions to fix the problem: https://support.microsoft.com/ru-ru/kb/2755139.
winsys.su
A required media driver was not found during Windows installation
An error that says “the required media driver was not found during installation” can confuse not only inexperienced users, since the text of the message does not clearly indicate the type of problem. The article will help shed light on the cause of the problem and possible ways its elimination.
You should be a little happy, since usually such an error occurs as a result of minor problems, sometimes failure, but only of the media itself. HDD itself or SSD drive doesn't have a problem.
Causes of the problem
There are several key options that cause the "Windows 7 required media driver not found" error to appear.
- Lack of USB 0 support;
- Crooked content recording or any system problems;
- The media itself is faulty.
All problems exist, but they are very easily eliminated. Perhaps by looking at the key list of failures, you can immediately pay attention to the correct item, otherwise you should alternately perform diagnosis and subsequent solution.
When installing Windows 10, 8 and Windows 7 on a computer or laptop, the user may encounter errors “The required media driver was not found. It could be a DVD drive, USB drive, or hard drive driver" (during installation of Windows 10 and 8), "The required driver for the optical drive was not found. If you have a floppy disk, CD, DVD, or USB flash drive with these drivers, insert this media" (when installing Windows 7).
The text of the error message is not particularly clear, especially for a novice user, because it is not clear what kind of media we are talking about and one can assume (incorrectly) that the problem is in the SSD or the new hard drive on which the installation is taking place, but this is usually not the case and the point is different.
Basic steps to fix the “Required media driver not found” error, which will be described in detail in the instructions below:
- If you are installing Windows 7 and doing it from a flash drive, connect the USB drive to the USB 2.0 connector.
- If the distribution disk is recorded on DVD-RW, or has not been used for a long time, try re-burning a boot disk with Windows (or better, perhaps, try installing from a flash drive, especially if you have doubts about the full functionality of the drive for reading disks).
- Try burning the installation USB flash drive using another program. For example, relatively often (for unclear reasons) the error “The required driver for the optical drive was not found” is seen by users who burned a USB drive in UltraISO.
- Use another USB drive, delete partitions on the current flash drive if it contains several partitions.
- Download the Windows ISO again and create an installation drive (the problem may be a damaged image).
The root cause of the error The required media driver was not found when installing Windows 7
The error “The required media driver was not found” during the installation of Windows 7 is most often caused (especially recently, as users update computers and laptops) by the fact that the bootable flash drive for installation is connected to the USB 3.0 connector, and the official OS installation program does not have built-in support for USB 3.0 drivers.
A simple and quick solution to the problem is to connect a flash drive to a USB 2.0 port. Their difference from 3.0 connectors is that they are not blue. As a rule, after this the installation occurs without errors.
More complex ways to solve the problem:
- Write drivers for USB 3.0 to the same flash drive from the official website of the laptop or motherboard manufacturer. Provided that these drivers are there (they may be part of the Chipset Drivers), and they must be written in unpacked form (i.e. not as an exe, but as a folder with inf, sys and, possibly, other files). During installation, click “Browse” and specify the path to these drivers (if the drivers are not on the official websites, you can use the Intel and AMD websites to search for USB 3.0 drivers for your chipset).
- Integrate USB 3.0 drivers into the Windows 7 image (this requires a separate guide, which I don't have at the moment).
"The required optical drive driver was not found" error when installing from DVD
The main cause of the error “The required driver for optical disks was not found” when installing Windows from a disk is a damaged disk or a DVD drive that does not read disks well.
At the same time, you may not see any damage, but on another computer installation from the same disk occurs without problems.
In any case, the first thing you should try in this situation is to either burn a new Windows boot disk or use a bootable USB flash drive to install the OS. The original images for installation are available on the official Microsoft website (instructions on how to download them were given above).
Using other software to burn a bootable USB drive
Sometimes it happens that a message about a missing media driver appears when installing Windows 10, 8 and Windows 7 from a flash drive recorded by a specific program and does not appear when using another one.
Try:
Problems with bootable USB flash drive
If the points indicated in the previous section did not help, the problem may be in the flash drive itself: if possible, try using another one.
And at the same time, check whether your bootable flash drive contains several partitions - this can also lead to such errors during installation. If it does, delete these sections.
Additional Information
In some cases, the error can be caused by both a damaged ISO image (try downloading again or from a different source) and more serious problems (for example, malfunctioning RAM can lead to data corruption when copying), although this rarely happens. However, if possible, it is worth trying to download the ISO and create a drive to install Windows on another computer.
The official Microsoft website also contains its own instructions for fixing the problem:
Operating room installation Windows systems simplifies every year, and Microsoft company provides all the necessary tools so that users can independently burn its image to a drive and carry out the installation process. During installation, you must follow the instructions that are displayed on the screen, but the installation does not always go smoothly, and sometimes you may encounter various errors. One of the problems that may arise when installing Windows from a flash drive or disk is the lack of the necessary driver. Depending on the version of Windows that is being installed, various errors are displayed:
- Windows 7: "A required driver for the optical drive was not found." If you have a floppy disk, CD, DVD or USB flash drive with these drivers, insert this media";
- Windows 8, Windows 8.1 and Windows 10: “A required media driver was not found. This could be a driver for a DVD drive, USB drive, or hard drive."
These errors are identical and differ only in description. Accordingly, their elimination methods are also the same. Let's look at what to do if the required media driver is not found when installing Windows.
The required media driver was not found when installing from a flash drive
The most common problem that causes the “Required driver not found” error to appear is connecting a flash drive to a motherboard connector with USB 3.0 protocol. This is due to the fact that the Windows 7 operating system installation program cannot work with the USB 3.0 connector. This problem is not relevant for installation programs for Windows 8 and Windows 10.
There are three ways to solve this problem that will allow you to install Windows 7 when you receive a message that a required driver is missing:
Required media driver not found when installing from disk
If the Windows operating system is installed from a disc - CD or DVD, then the error in question may also occur. Here the reason is also trivial - damage to the drive from which the installation is taking place. This could be a crack, scratch, chip or other defects that make the information from the disk difficult to read.
Important: This error does not depend on the version of Windows recorded on the disk, and it can occur when installing any variation of the operating system.
It is worth noting that in some cases the error “The required media driver was not found” when installing from a disk may not occur on all computers. This is most often due to the speed of the drive. By rotating the disk faster, in some cases it is possible to read information from it without errors, even if it has some damage.
To solve the problem, you will need to burn the image of the Windows operating system to another disk or flash drive.
What to do if the required media driver is not found when installing Windows
If the tips above did not help solve the problem, and an error occurs when you try to install the operating system from a flash drive or disk, we recommend trying the following steps:
It is extremely rare that an error may occur when writing data to the drive if there are problems with RAM computer. If none of the above tips help, try recording a system image from another computer.
When installing Windows 7 on a brand new laptop from your external hard Zalman disk ZM-VE200 emulating a CD/DVD drive running via USB encountered an error. The system refused to install without finding the drivers required for installation. No amount of resetting BIOS settings, changing the order of boot disks, changing the installation disk/image to other editions, or changing a 32-bit system to a 64-bit one also helped.
A message popped up:
The required driver for the optical drive was not found. If you have a floppy CD, DVD, or USB flash drive with this driver, insert this media. Device drivers were not found. Verify that the installed media has the correct drivers and click OK. Note: If the Windows installation media is inserted into your CD/DVD drive, you may want to remove it while you perform this step.
Error installing Windows 7
The solution turned out to be simple: I switched the external hard drive to another USB and the download went through, the installation proceeded step by step, the problem was solved by itself
The problem lies in the new USB 3.0 interface, the ports are usually painted blue, be careful with them when installing Windows 7 from USB flash drives and USB hard drives
Possible causes and solutions:
- Insert the installation flash drive into a regular USB connector 2.0, and not in USB 3.0 They are easy to distinguish by the color of the contacts: in 2.0 it is black, in 3.0 it is blue. Just don't plug into the blue connector. Look at the picture
Windows 7 does not support USB 3.0 out of the box. Therefore, when installing from a flash drive, connect it to a USB 1.x/2.0 port. If you only have USB 3.0, you will have to stock up on drivers. - Try to do reset BIOS to factory settings. If the previous point does not help, try resetting the BIOS, this has helped many
- Temporarily disable in BIOS settings USB 3.0 Some laptops and computers have the option to disable USB 3.0. via BIOS, and then the connector will work like a regular USB 2.0. Try to do this, install the system, and then return it back.
- Don't use Windows builds. Only original images. You may not be installing original Windows, and remade by unknown “authors”. Many drivers could have been removed from it and system programs, and add a bunch unnecessary programs, so I advise you to find the original image: on torrents, on MSDN, on license disk And so on.
- Burn the installation disc at the minimum speed. If you burned the image to disk and cannot install it, then try burning the image again on a blank at the minimum speed - 1x, 2x or 4x. Oddly enough, but this also helps.
- Download USB 3.0 drivers separately to a USB flash drive and point to them during installation. If none of the points help, then you will still have to download the USB 3.0 drivers, put them on a flash drive or hard drive and indicate where they are during installation. Then the installation will go like clockwork.
Drivers for USB 3.0 can be downloaded from the USB 3.0 drivers link: Renasas Electronics* USB 3.0 Driver or on the website of other manufacturers - Try installing Windows from another USB flash drive It is unlikely that it will help, but for some readers this was the only thing that helped. Let's leave this to the conscience of flash drive manufacturers or users who initially formatted flash drives incorrectly.
Installing Windows can sometimes be a bit of a hassle. This applies not only to new version 10, but also to the already proven software. Seven also sometimes gives out surprises that you obviously don’t expect to receive. One of these unpleasant surprises is when Windows asks for device drivers right during installation. Typically a message like this looks like this:
The essence of the problem is clear: the operating system installation does not find the driver for the drive, so it cannot continue the process itself. If Windows does not see any devices, then a real headache begins for the average user. But the point is that when this message everything is much simpler. There are typical solutions to get out of this situation. Just choose one of them, perhaps it will save you from such an unpleasant situation.
Crooked assembly
Today you can find a huge number of installation images on the Internet. We have already discussed how to download and install such an image. Many fans post online Windows versions XP, 7, 8 and 10. When loading such virtual media, the user assumes full responsibility for the security of his computer. In most cases, nothing serious happens. It’s just that some devices or components cannot be found on the image during installation. You have to install the operating system 10 times to understand: the quality of the downloaded installation media leaves much to be desired.
Worn disk
It is extremely difficult for the drive to read files from the installation media. Optics require a smooth and clean surface. It’s no wonder that for this reason, today Windows 10 is already delivered to your computer via the Internet. Physical disks are fragile and can be easily scratched or chipped. Just one such damage can force the computer to go through the same segment for a long time. As a result, drivers for the device will not be found, and the same error will appear on the screen. Yes, that's exactly how it goes:
Poor-quality installation media may cause an error when no drivers are found during installation.
In this case, you need to use only new write-once discs for the drive. Reusable discs are more convenient for repeated use, but the recording quality on them is constantly decreasing. Considering that most users have long abandoned disks, the use of a drive during installation requires increasingly high quality media. Such devices go out of circulation, become obsolete and no longer cope with their tasks as well as their direct competitors. After all, on USB cards memory is not such an issue due to the solid state structure.
Wrong connector
Let's say Windows 7 is installed in the same way as its modern descendant version 10, via USB device. In this case, if an error occurs when the drivers are not found, we can say that the wrong connection connector is used. As strange as it may sound, the external contacts of a computer may be the same, but in their properties they can be very different. It's like Windows 7 and 10 - the principle of operation seems to be the same, but the essence is different. There are two USB standard Connectors: USB 2.0 and USB 3.0. In short, version 3 is faster. Unfortunately, in the installation Windows image 7 does not provide drivers for this standard. That's why the computer doesn't find them. In this case, we can advise you to plug the USB drive into the 2.0 connector so that the installation can continue.
True message
It may also be that Windows 7 actually reports the correct information and simply cannot find the drivers on the installation media. In such a situation, you should insert a disk with drivers from the components into the drive. system unit. Next, click on the Browse button and show the installation the path to the necessary files.
But, despite such problems, users still continue to use sevens. These OS are convenient, and all their mistakes have already been worked out, which has not yet been done in the 10th generation. Specific differences between versions 7 and 10, as well as .
(Visited 26,013 times, 1 visits today)