Windows 10 how to login securely. Special launch options

Experienced PC users know about such a Windows option as " Safe mode". It is necessary in modern operating systems, because the latter are by no means infallible. Errors happen, and sometimes it is not possible to correct them in working order. With XP and 7, everything was more or less clear. But with version 10, everything has become much more complicated. Standard login to safe mode was disabled. Now this is not so easy to do. What caused this decision by the developers is unclear. But the undeniable fact is that the seventh version was much clearer than the newfangled “ten”. However, they said so in the days of XP. So, most likely , users will get used to this “miracle.” Since logging into a safe Windows mode 10? Let's talk to them about this.

What is "safe mode"?

Safe mode is a way to boot the system with only the most important drivers. That is, only those components that are necessary for minimal system functionality will be loaded. No additional codecs, flash or other unnecessary nonsense. This mode is used to correct operating system errors and return to an earlier state using system recovery. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter safe mode in Windows 10.

Sometimes this OS condition requires an "accounting" fix or a local conversion. Naturally, to carry out this procedure you need access to the Internet. And here the “Safe Mode with loading network drivers” option will help. Tens users need to choose this option, because to fix account It won't work without the Internet. And this brings us back to the question of how to enter safe mode

How to log in if the OS is starting?

There are various options for loading "tens" in safe mode, if everything works fine. The simplest one is to click on “Shutdown” in “Start” while holding down “Shift”. You will then be prompted to select a download type. All you have to do is choose the one you need. Also try "returning" the mode launch when pressing F8. You just need to enter the required text in the commander line. How to enter Windows 10 safe mode via command line? More on this below.

There is another option. Enter "Options" and then - A lot of unnecessary text will appear with the available options. Among others, there will be the items “Restart the computer in safe mode” and “Restart the computer in safe mode with network driver support.” Select the one you need this moment, and reboot the PC or laptop.

You can try another procedure like this. Go to “Start”, select “Run”, enter “msconfig” (without quotes). A dialog will appear with a “Download” tab. Among a fair number of items there will be “Boot Options” and “Safe Mode” with a bunch of options. This is what needs to be ticked. And then just restart your PC.

Using the command line

Go to “Start”, select “Command Line” and enter the text in Commander: “bcdedit /set (default) bootmenupolicy legacy” (without quotes). Then reboot the machine and press F8. The Windows Start Options window will appear. Here we select "Safe Mode". Will they be needed? network drivers- decide for yourself. This is one of the answers to the question of how to enter safe mode

A variety of problems are usually solved through the commander. But in the “ten” it is best to use Windows Power Shell - a console borrowed from the Linux OS family. This tool allows you to run commands as an administrator and is much faster than the standard commander. And it is clearer to those who have at least once used Ubuntu or Mint. The command line method works on any Microsoft operating system (except XP). The company from Redmond did something adequate. Honor and praise to her!

What to do if the OS does not start?

There is only one way here. There is no way to launch Windows in Safe Mode. Therefore, you need a flash drive with the Tens distribution kit. When loading the installer, you can pull off a trick with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription “System Restore” in the installer’s welcome window. A commander will appear there, into which we enter the text we are already familiar with (without quotes). Now reboot your PC or laptop. This is one of the answers to the question of how to enter Windows 10 safe mode through BIOS.

Many people think that if operating system does not want to work, then the easiest way is to reinstall the OS. On the one hand, this is true - a clean system always works faster. But on the other hand, frequent reinstallations of the operating system are certain death for hard drive. Not to mention the fact that there is a lot of time to kill full customization systems. This does not include the time required to install it. Therefore, it is easier to solve all problems that can be fixed using Safe Mode.

ASUS laptops

There are some nuances here. The fact is that ASUS laptops have a kind of entrance to boot menu(select media when loading). Before performing actions with the commander in the "tens" installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold down Tab at startup and select the desired boot type. How to log into safe mode in Windows 10? ASUS is the same PC. That is, the method with the commander from the “tens” installer also works.

In general, Asus laptop manufacturers have their own concept of convenience and ergonomics. That is why the engineers deviated from the standard canons and assigned some crazy keys for low-level laptop control. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your “correct and standard” actions can lead to very sad consequences.

Acer laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the laptop BIOS. Then go to the "Boot priority" tab and select our flash drive with the "tens" installer. Now be sure to reboot the device. The laptop will boot from the drive, not from the HDD. How to enter Windows 10 safe mode in Acer E5-731? Using the commander in the installer. Exactly the same as in the previous examples.

With the Acers, everything is somehow unclear. This method of getting to drives with distributions was used in ancient times. system units with processors from AMD and why manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and set the priority to starting from the HDD. And this is completely inconvenient.

Lenovo laptops

How to enter Windows 10 safe mode through the BIOS of Lenovo laptops? It's easiest here. When starting the device, just press the F12 button and the media selection menu will appear. Select the flash drive and boot. And then we proceed according to the already known scenario with the command line and the required command. Laptops from Lenovo are the simplest in this regard. The Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more famous brands in terms of quality and layout of control elements. And in the case of Windows 10, they behave more adequately than other models. There is even an interesting option with Safe Mode for those who use UEFI. Just press Delete at startup and launch options will appear. Well, what's not to love?

Conclusion

Of course, entering safe mode in Windows 7 was much easier. But it’s also in the top ten. It’s just that the developers made it less accessible. But with the help of certain commands or actions, it is quite possible to load the operating system in this mode. And after that, you can correct errors in drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problems.

If none of the above methods helped fix system errors, that is, at least two ways. The first is to reinstall the entire operating system. This advice is not without common sense, since fresh Windows always works better and faster. If you don’t know how to install, or you don’t have free time, then there is only one way out - take your laptop or PC to a professional workshop. They will do everything quickly and painlessly. But it will cost money.

Many users ask how to start Windows 10 in safe mode. The thing is that it doesn't work in Windows 10 old way start safe mode. In Windows 10, you can't just select Safe Mode.

Why was it necessary to remove such a simple and usual way starting safe mode is not clear. But you don't have to choose. We need to use what Microsoft offers us.

In this article we will describe three ways to start safe mode in the operating room. Windows system 10. The first two methods can be used in cases where Windows 10 is still loading. That is, you can boot and perform some actions within the system. The third method is for those cases when the system is so damaged that it refuses to boot in normal operation.

Starting Safe Mode Using MSCONFIG

If your computer still boots, then in a simple way To start Windows 10 in safe mode will be the System Configuration utility, also known as . To use this method, press the Windows + R key combination and enter the MSCONFIG command in the window that opens.

After executing this command, the System Configuration window should open. In this window, you need to go to the “Boot” tab and activate the “Safe Mode” function.

After this, close the “System Configuration” window by clicking on the “Ok” button and restart the computer. As a result of these simple manipulations, Windows 10 should start in safe mode. In order to disable starting in safe mode, you need to go to MSCONFIG again and disable this function.

Starting Safe Mode Using the Command Prompt

Another way Windows startup 10 in safe mode is . Open the Start menu and type search query"CMD" or "Command Line". Then click on “Command Line” right click mouse and select the “Run as administrator” menu item.

After this, “Command Prompt” will open in front of you with administrator rights. Now you need to run the command "" and restart your computer.

After the computer restarts, a menu will appear on the screen with a list of all possible modes Windows operation 10. With this menu you will be able to start Windows 10 in safe mode.

In order to disable the display of this menu, you need to go to the “Command Prompt” again with administrator rights and execute the command “”.

Starting Safe Mode Using the Windows 10 Disk

If Windows 10 does not boot, then you will not be able to use the methods described above to start safe mode. In this case, you will need a boot disk (or bootable USB flash drive) with Windows 10.

Boot from boot disk. The first screen will ask you to select your language and other regional settings. Here we simply click on the “Next” button.

After this, a window will appear asking you to install the operating system. In this window, you need to click on the “System Restore” button. This button is located at the very bottom of the window.

After this, go to the “Diagnostics” section.

Then open the “Advanced Settings” subsection.

Then open the command line.

After this, the “Command Prompt” window should appear on the screen. Here you need to enter the command that we already talked about above. Therefore, we enter the command “ bcdedit /set (globalsettings) advancedoptions true" and wait until a message appears indicating that the operation was successful. Then just close the “Command Prompt”.

After closing the command line, click on the “Continue” button.

As in the previous method, disabling this menu is done using the command “ bcdedit /deletevalue (globalsettings) advancedoptions».

Windows 10, as practice shows, is a rather specific system, and installing it without registering on the official Microsoft resource and creating an account with a login and password is simply impossible. But a person may forget the key combination to log into the system, because the simplest passwords are not accepted during registration. Therefore, many users are wondering: how to log into Windows 10 without entering a password. Let's look at several standard and simplest procedures for disabling it, without touching on issues related to deleting a Microsoft “account”.

Login without password. Windows 10: the simplest method

In principle, the most simple option A way to get rid of the constant requirement to enter a password when logging in is to disable it in the settings by activating the so-called automatic login mode.

Let us note right away: such settings should be applied only if the user is the only user of the computer terminal. Otherwise, for obvious reasons, it is not recommended to do this.

So, how do you log in without a password? Windows 10 offers such methods. To do this, first enter the netplwiz command in the Run menu (Win + R) or find it through a search from the Start menu, and then activate execution.

In the window that appears, there is a line requiring you to enter a password, opposite which there is a checkmark. We remove the “bird”, after which the automatic login settings window appears. Here you will have to have your own the specified name Enter the current password and enter it again to confirm compliance. Now all that remains is to save the changes by pressing the OK button. All. The next time the system boots, the user will be able to log in without a password. Windows 10 allows this option.

It’s worth noting that these settings apply exclusively to the moment Windows starts. If the sleep (hibernation) mode is in the active state (enabled), upon exit you will still be prompted to enter a password.

Login without password. Windows 10: Wake Up Settings

As is already clear, at this stage you should change the exit parameters. To do this, you just need to right-click on the battery icon in the system tray and select the power options line. This section can also be easily accessed from the standard control panel. In order not to dig around for a long time, you can call it with the control command from the same Start menu, but from system tray these settings are recalled faster.

To configure login without a password (Windows 10), you should pay attention to the line for changing wake-up password settings, which is located on the left. When entering the section for changing currently unavailable parameters, you must activate the line indicating that a password request is not required. Thus, by applying both described methods, you can completely remove the requirement to enter a password both when logging into the system after startup and when exiting the sleep state.

Disabling the password requirement in the system registry

You can also change settings when login without a password is required (Windows 10). system registry. To do this, you need to enter the editor by calling it with the regedit command in the “Run” menu, then find the HKLM branch, and in it, through the Software directory, go down to the Winlogon section.

On the right side of the editor, check the DefaultUserName entry so that it contains the name of the current user. Then we find the DefaultPassword line. If there is none, you will have to create a string parameter (String Value), rename it to the specified name and enter the current password in the value field (then confirm it).

Now all that remains is to activate auto mode entrance. To do this, use the line AutoAdminLogon, when entering the parameters of which the value is set to one. After the reboot, the password will not be required.

Setting up a PIN code

There is another rather interesting method when you may need to log into Windows 10 without entering a password (only the PIN code will be used as a key). You can configure it through the settings menu, where you select the accounts section.

Here you need to use the login parameters line on the left. On the right side of the window there is a special option for setting up a PIN code. Next, you will have to log in to the setup system using your account Microsoft records, and then come up with and enter a four-digit code twice. Now, if the password is disabled, you will need to enter the code when logging in. As many have probably already guessed, it works the same way as the owner mobile gadget logs in if the code request settings are active.

Reading time: 6 minutes. Views 63 Published 08/24/2018

Beginner users may be encountering the concept of safe mode for the first time. But experienced PC owners know exactly what it is and how useful it is. It really helps solve a huge number of problems that arise with your computer, from driver errors and nasty viruses to the frightening blue screen of death. "Ten", in contrast to previous versions The operating system does not support launching it by pressing the F8 key. Therefore, we will analyze in detailand we will explain step by step several simple methods.

What is Safe Mode

So, first, let’s clarify what it is and how it differs from the normal mode of operation of the operating system. This is a special way of loading the current OS; at this moment, the system is only partially loaded, that is, only the minimum set of components required for operation is activated. Be prepared for the fact that the desktop will not even load the background wallpaper installed under normal conditions.

What is the advantage of this download option? It blocks everyone's startup third party applications, which is especially important when the computer is infected with viruses. Here's what a user can do by starting the operating system in safe mode.

. Because malware like to settle into applications included in startup, and in current mode they don't start. Accordingly, viruses do not have the ability to block the operation of the antivirus. Thanks to this, useful software can be installed without problems and does its job.
. If your PC has become noticeably unstable, then the best option The solution to the problem will be to activate safe mode and launch the system “ ” in it.
Install and . As mentioned above, in this mode a minimum set of drivers is activated. And if the problem lies there, it can be easily fixed.
Check PC operation. If the computer works perfectly in safe mode, but in normal mode it does not please with performance, then there are problems in the software part. If problems persist in safe mode, then you need to look for problems in the hardware.

The computer goes into safe mode without much difficulty. However, the usual way developers latest updates the operating system was removed, so now we have to figure it outhow to start safe mode in windows 10.

How to start Safe Mode in Windows 10

Today, users have four ways to start Safe Mode. Next we will look at each of them in detail.

Method 1

The first method we want to suggest is entering safe mode through system configuration. By the way, this method will give results in previous versions of the operating room, so it is probably familiar to many experienced users.

To return to normal mode, repeat the described algorithm again, but, on the contrary, uncheck the boot options.

Method 2

The second method uses the special download options section. This option is only suitable if the OS runs without difficulty on your PC. To activate safe mode, do the following:

If the operating system does not boot, but shows the login screen, then you should click on the power button in the lower right corner, and then, while holding down the Shift key, click the “Restart” command. The Special Boot Options screen will open, allowing you to enter Safe Mode.

Method 3

This answer to the questionhow to start safe mode in windows 10, represents heavy artillery and implies the presence of a boot disk or flash drive with a portable OS. This method is perfect when the operating system does not want to boot at all.

To return to normal PC operation, run Command Prompt as an administrator and run bcdedit /deletevalue (default) safeboot

Method 4

The last option to get the desired result is almost the same as the previous one. The only difference is that it does not immediately launch Safe Mode; it allows you to select the appropriate boot options. Moreover, it can also be used on any compatible OS, and not just on the “top ten”.

Exiting the special mode is performed by executing the command bcdedit /deletevalue (globalsettings) advancedoptionsand restart the computer.

In this article you will find several simple ways to enter Safe Mode in Windows 10 (in English terminology it is called Safe Mode). Most often, users do not understand how to boot into safe mode if . After all, the F8 key will most likely not work during boot. But first things first.