Write the Russian version of windows 7 maximum onto a flash drive so that you can install it later maximum Windows 7 via a USB flash drive to a laptop or PC, any user can do it. To do this, first you need to download ISO image windows 7 maximum torrent for flash drive. Windows 7 Ultimate is released in two versions, 32 bit and 64 bit. Very convenient, our images of Windows 7 ultimate 2017 with the most latest updates SP1 from microsoft, in addition, after our original image is installed maximum windows, on the desktop you will see an activator key for windows 7 64 maximum and plus a driver pack for updating and installing drivers for windows 7 in Russian for your device.
Windows 7 flash drive is a clean image operating system always at hand or in your pocket. Boot windows flash drive 7 maximum will replace calling an adjuster at any time hardware to your home or on a trip with a laptop to service center, and this is some kind of money and time.
Burning a maximum Windows 7 iso image to a bootable USB flash drive
To burn an ISO image with Windows 7 Ultimate onto a flash drive for further installation of the operating system on a laptop or PC, you need to download Windows 7 for installation from a flash drive using the links above. Images for installing Windows 7 on a USB flash drive are no different from images for installing via DVD.Of course, you need a flash drive with a size of at least 4 GB. And we need a program that will make a bootable USB flash drive with Windows 7 from our image and your flash drive. For these purposes, we recommend three programs to choose from.
- a program that will create a bootable USB flash drive, clear interface. There will be no problems with this softom.
- one of the most popular programs of its kind to create bootloaders and installation USB carriers.
- a universal program for working with images, will write your iso image both to a DVD and a flash drive.
Installing Windows 7 from a USB flash drive
Installing Windows 7 from a flash drive is no different from installing Windows 7 from an official DVD, you just need to specify the priority in the BIOS when booting the system from a USB flash drive. Or, when you turn on your laptop or computer, call the BOOT menu. This is done literally immediately after pressing the power button on the laptop or PC, in the interval from 2 to 5 seconds.Most often, the F12 key is used to call up the boot device selection menu, but there are manufacturers who use their own key combinations. To get into boot menu For example, on a Samsung laptop you need to press Esc (only once!). If you press Esc at least twice, the boot menu will close as soon as it opens. Therefore, you need to somehow calculate and clearly get into right time by pressing the boot menu key. For those who are not experienced, this may not be easy to do.
Calling the boot menu on HP laptops is also unusual. First you need to press the Esc key, then the service menu laptop. In it we select the desired item (by pressing hotkey). To call the boot menu on an HP laptop, press the F9 key.
Below is a table of hot buttons for calling the boot menu for different manufacturers and device types.
If you have questions, suggestions and wishes, write in the comments below. No one will be left unattended.
Hello dear readers of the blog site. Today I want to talk about how to create a bootable Windows 7 USB flash drive from an ISO image. The other day I encountered an error when loading the operating system. The client apparently decided to shrink the disk on which the operating system was installed to save space. Such actions caused the error to occur. Since she has an Apple all-in-one and does not have a CD drive, the only correct solution was this
This prompted me to think that every user should be able to create a bootable USB flash drive for Windows 7. So I decided to write a short article with simple description actions.
Before we begin, I would like to note the main points:
- You must have an ISO image of the operating system. You can get it on any torrent tracker using ;
- The capacity of the USB storage device must be at least 4 gigabytes.
- Before starting work, make sure that there are no important data and files on the drive. We will have to format it later.
- If your computer contains USB 2.0 and 3.0 ports, then when creating a bootable Windows 7 flash drive, you must use USB 2.0. The fact is that this operating system does not support USB 3.0
Let's look at a few options that, in my opinion, are the simplest and most effective. Decide for yourself which option you prefer.
How to create a bootable Windows 7 USB flash drive using UltraISO
There is a lot of software on the Internet that can be used for our purposes. Personally, my eye fell on the UltraISO program. You can download it from the link http://www.ezbsystems.com/ultraiso. This program completely translated into Russian and there is an opportunity to use it for free during the trial period, which will be quite enough for us.
Then select the language you need and start the download process. After downloading, we find the program in the folder where we downloaded it. Launch and select a trial period.
If all actions were performed correctly, the UltraISO program window will open in front of you. In it we will create a bootable Windows 7 flash drive from an ISO image.
First, you need to remember where you saved the image from Windows 7, or copy it from an electronic medium to a pre-selected folder. Then in the UltraISO program window at the top of the window, in the “File” menu, select open or press the key combination Ctrl+O. We find the operating system image in a previously saved location and click the open button, confirming the choice.
Before making a bootable Windows 7 USB flash drive, it is recommended to remove all USB drives from the computer (except the one with which we will work in the future). The fact is that the UltraISO program may incorrectly determine the required one.
In the window that opens, information on our flash drive will be visible. If in this moment There are several of them on your computer, so you can easily select the one you need. You can also see information about the operating system image being created. Before you start the recording process, you need to format electronic media. To do this, click the format button and select the type file system. If you do not complete this step, problems may occur during downloading.
After we have formatted the future boot USB drive, let's proceed directly to recording. To do this, click the “Record” button and wait some time until the end of the process. If you did everything correctly, then at the end you will see a completion message.
How to make a bootable USB flash drive using the Microsoft USB/DVD Download Tool
In addition to third-party software for creating a bootable USB flash drive, there is also an official utility from Microsoft. Working with it is extremely simple and does not require special skills or knowledge.
The first thing we need is to download the USB/DVD Download Tool . Next, we proceed directly to installing the utility. Let's launch installation file and following simple steps we complete the installation process.
The USB/DVD Download Tool is fully English language. However, it is so easy to use that you will not encounter any problems.
After completing the installation process, launch the program by double-clicking on the shortcut created on the desktop.
In a new window, select the ISO image that you previously recorded on your computer.
The next step is to select the media type. Since we are creating a bootable USB flash drive, we select “USB device”. It is also possible to select DVD, but this is no longer relevant to the topic of this article.
In a new window, you need to select which USB drive we are going to write the image to and click “Begin copyring”. Before this action, the flash drive must already be inserted into your computer
After you click the “Begin copyring” button, the utility will ask you about the possibility of formatting this drive. Be sure to make sure that the necessary information is not on it, and if it is, then copy it to a separately created folder. The fact is that in most cases, after formatting any media, it is simply impossible to restore information on it.
When you confirm that you are ready to format the drive, the utility will issue another warning. In this window we also confirm our choice.
If you agree with everything and last action If you have confirmed your choice, the program will start the deletion process followed by recording. If everything was done correctly, then we can assume that you made a bootable Windows 7 USB flash drive yourself.
I hope that my article will help you in this difficult task and everything will go smoothly. However, in our life not everything is as ideal as we would like and difficulties may arise. Please leave your questions in the comments and I will try to help you.
Windows has long occupied the leading position in the field of home computer technology. The share of 99% are cases when Microsoft OS is installed in the house where there is a computer. This article is aimed at covering in great detail the procedure of how to create a bootable USB flash drive for Windows 7, functional properties and difficulties.
Why create a bootable USB flash drive for Windows 7
Mobile technologies also do not stand still. Just 5-6 years ago everyone had regular cell phones, but today almost everyone has their own smartphone. And the vast majority are running Android OS. You can read more about how to create your account on Android.
And of course, every day more and more people are trying to make money using the Internet, there are many effective ways, but the most effective one today is traffic arbitrage. If you want to try to gain financial independence and make money on the Internet, then detailed step-by-step instruction described in the article.
But today we will talk about more familiar things, in particular about creating a bootable flash drive. Effective mastery of a topic can only be achieved with a complete approach to the content of the question. Therefore, you first need to understand the question of the necessity of the process itself. Traditionally, all Microsoft products were shipped on disks. But often there is a need for a bootable USB flash drive, and here are the main reasons that cause this need:
- The process of technology development is continuous. Try to remember the last time you used disks on your computer? For a computer, disks are gradually becoming an unnecessary appendage. Some computer manufacturers have completely abandoned the disk drive on some devices. And creating such a flash drive is a simple necessity.
- Fast installation speed of Windows 7. Appeared about 10 years ago USB interface 3.0, which significantly reduces installation time if it is specific to a specific media. So, installation with Windows disk 7 will take about 20-40 minutes, and from a flash drive it’s twice as fast. Later we will reveal in detail the process of creating a flash drive that supports such an interface.
- This is simply more convenient than storing all the necessary information on disks. One small bootable USB flash drive can fit Windows 7, leaving room for other programs your computer needs.
It’s worth mentioning one more thing: you can create not only a flash drive, but also an SD card, but not all laptops and computers will be able to accept them; this entirely depends on the device on which the system will be installed.
An easy way to create a bootable USB flash drive
This subsection of the article will reveal the essence of two methods that will help you create a bootable USB flash drive for Windows 7. Both of them are quite simple, but the first is characterized by greater stability of the software. What is needed for this:
- Disk image. You can download it using the Internet on any torrent tracker. If you want a “clean” system, you can make an image from a disk, but we will describe this process a little later in the article.
- UltraISO software. Free version does not allow you to work with images larger than 300 megabytes, so you need to purchase a licensed version for 1,400 rubles or download a hacked one.
- Flash drive with a capacity of 8 gigabytes or more. It is recommended to format it before starting work using a file NTFS systems. If you do not perform this procedure yourself, UltraISO will automatically perform this action for you. Therefore, you must first make sure that there is no important files or information.
Let's take a step-by-step look at how to create a bootable USB flash drive for Windows 7:
- Launch the UltraISO program. This must be done on behalf of the administrator.
- Open the file tab located on the left. Here you need to specify the path to the image intended for transfer to a bootable USB flash drive. The image creation process will be described in more detail below.
- The image is ready. Now we indicate the path to the flash drive intended for creating the image. You need to select “Boot”, then “Burn image” Hard drive" Next, in the Disk Drive area, you need to select the required flash drive.
- Click record. Here the system will notify you that the data has been deleted. The process of creating a flash drive has begun.
Like this with the help of four simple steps we can easily create the media we need.
Create a bootable USB flash drive for Windows 7 using the official Microsoft program
If any reasons prevent you from using UltraISO, for example, purchasing software they don’t like it at state enterprises, but you can only use licensed ones, the option of exploitation is possible free utility- USB DVD Download Tool. The official website contains a source where you can download it for free. This program will allow you to create bootable media if necessary.
- After completing the downloading process of the required program, you need to launch it, select a ready-made system image in ISO format in the window that opens, then click “Next”.
- After this, we will be prompted to write the image to the media. We select a flash drive from the presented options.
- Next, you will need to select the media on which the image will be created. As is the case with UltraISO, the system will ask for your consent to format the flash drive, and then start the process.
Creating a Windows 7 image before writing to a USB flash drive
When downloading an operating system from the Internet, there is a high probability that the finished image downloaded will already be in iso format. But if you have a disk with the system, and also the need to create a bootable Windows 7 USB flash drive with this specific system, then the proven UltraISO program will help you in this situation. Here are the detailed instructions:
The left column should show the disc inserted into the drive. This disk must contain the required operating system. Click tools, then the first item in the drop-down window is to make an image
After which the program will begin creating a disk image. Upon completion, you will be asked to open the resulting image - we refuse.
Thanks to these simple instructions, you can create an image of any disk that you need. Windows 7 is no exception.
Installing Windows 7 from a bootable USB 3.0 flash drive is an important preparation step
Creating a bootable USB flash drive, as we have already found out, is quite simple, but then serious problems can begin. One of which is the lack of Windows boot loader 7 support required USB. The problem is being solved in a simple way- by plugging the flash drive into USB port 2.0. However, this move will not always help solve the problem in this way. But the presence of another method that allows you to solve this issue with a completely different approach.
To begin with, it is worth saying that on media and on computers USB ports 3.0 are marked in blue or light blue, so you won’t confuse them with others. let's consider detailed instructions how to install Windows 7:
- You need to download drivers for the motherboard of your device that are responsible for supporting such USB. You can download them from the manufacturer's website. They are always available for free. Be sure to unzip them. Be sure to make sure that the files are in .inf format.
- The next step is to create a winpe folder. Then you need to create a usb3 folder and a mount folder inside it. For convenience, this is best done in the root directory of drive D, since then we will have to enter some of the commands manually.
- Place the unzipped drivers in the usb3 folder.
- You should already have created a bootable USB flash drive by following the instructions above. Then in it you need to go to the sources folder, where you can then find the boot.wim file. It needs to be duplicated in the winpe folder.
- Then we launch the command line (the Win+R key combination will help open a window where you need to enter cmd). IN Command line we indicate the path to the winpe folder, this is done like this: we write cd /d the path to the folder, in our example it turns out cd /d D:\winpe, press enter.
- Then you need to write three commands, pressing enter after each: They need to be written in strict sequence. Thus, we write the drivers for the required USB into the bootloader.
- After that, copy boot.wim from winpe back to sources. When prompted to replace, click yes.
Now your bootable flash drive can work with USB 3.0.
Conclusion
Today we looked in detail at how to create a bootable USB flash drive for Windows 7. We looked at the two main methods and programs that you need to work with. With the help of these instructions, even the most inexperienced user can not only create a flash drive, but also teach it to work with the increasingly popular USB3.0.
Cast aside doubts, believe in your abilities, making a bootable USB flash drive for Windows 7, 8.1 or 10 is as easy as shelling pears, and you will definitely be convinced of this. There are several ways to create a bootable USB flash drive from iso, using different programs- simple and smart, humpbacked and crooked, which one to choose is up to you.
In this article I will try to show you a fairly simple method with 100% efficiency. Whether you like it or not, soon the world of optical drives will sink into oblivion and will never return; everyone without exception will have to learn how to create a bootable flash drive, and in my opinion it is better to do this before than after the OS crash. The thousand-times proven program for a bootable flash drive, Rufus USB, will help you realize your need.
How to make a bootable USB flash drive for Windows 7-8.1 correctly - detailed instructions.
So, correctly creating a bootable USB flash drive 7, 8.1 will require the following from you. Flash drive with a capacity from 4GB to 8GB (depending on the size of the iso image). Next, you will need a good ISO image of the operating system, and note - not some crap rebuilt by someone unknown, with a set of outdated programs, but a 100% working one official version Windows 7 or 8.1 (whatever you prefer). It is this image that will save you from surprises, ensure error-free operation and DirectX update, drivers, etc., will allow you to make a high-quality bootable USB flash drive 7, 8.1.
For those who have problems with Windows image iso – the disk is scratched, the DVD drive is broken, it is missing from the laptop initially, too lazy to create an image, etc., I suggest using the largest Russian-language torrent tracker and filling this gap. Win 7 and Win 8.1 images are based on official Microsoft releases, with the addition of a small useful feature- for example, the Win 7 image contains all 32-bit and 64-bit versions from Starter to Ultimate, which, you see, is very convenient.
The second thing we really need is a program for creating a bootable Rufus flash drive. No installation required, just download and run. To avoid any surprises, the name of the folder with the program, the folder with the image and the path to them should not contain Russian letters; use the Latin alphabet - English.
Next to the Rufus program folder, create another one with the intuitive name Windows-7 or Win-8. Opening file manager Total Commander(if you don’t know what this is, it’s time to learn how to operate files correctly) or an archiver WinRAR– unpack the archive with the program, transfer it Windows image from the downloads folder to the created folders.
It remains to voice the last cautionary phase - transferring and saving important information for you from a USB Flash drive to HDD. The first step in the process of creating a bootable Windows 7 USB flash drive will be formatting - cleaning and repartitioning the media.
Step one. We turn our attention to the desktop, double-click to launch the “Computer” shortcut, right click Click on the flash drive shortcut with your mouse. In the menu that opens, left-click on “format”, then what to select and where to click is shown in the picture. We are waiting for completion, the preparatory process is complete, we are 100% ready to make a bootable Windows 7 USB flash drive correctly and the first time.
1. Open the folder with the Rufus program - launch it, in the program window that opens, find “Device” and point to the flash drive, if it is not picked up automatically.
2. The next item is “Partition scheme”, select “MBR for computers with BIOS or UEFI”. If you need to install an operating system on a hard drive with a capacity of more than 2000GB, use “GPT for computers with UEFI”.
3. “File system” - FAT32 can be used with images smaller than 4GB, images larger than 4GB require the use of the file system - NTFS.
4. We leave this item unchanged, the default “Cluster size” is 4096 bytes.
5. “ISO image” - click on the optical drive icon, select the ISO image of the required system in Explorer.
6. Raise your gaze a little higher, set a name that is clear to you for the “new volume label” - in English letters, Win-7 - for example.
7. We check the correctness of the choice and the next action is to command Rufus to make a bootable flash drive 7, press the “Start” button. The program will issue a warning in Russian, click “OK” and leave the computer alone.
We take our playful hands and carry them to the kitchen, by force of will we force them to pour tea or coffee - we slowly enjoy the drink. This is a simple precaution; by not doing so, you will ensure the continuous creation of a bootable Windows flash drive; you will not be able to cause an error, overload the processor, stupefy the file subsystem, etc.
Depending on the speed characteristics of your PC, after 5-15 minutes you will see the inscription - 8 “Ready” - the bootable flash drive has been created, press nine - “Close”.
That’s actually the whole science, how to make an image of a bootable flash drive - you now know. As you can see, nothing extremely complicated or impossible, the main thing in this matter is to maintain a sequence of actions and you will definitely succeed.
How to make a flash drive bootable inBIOS.
To successfully install Windows from a flash drive, there is only one question left to answer - how to make a flash drive boot disk in BIOS? The question is important, because starting the installation differs from your usual order, with DVD disc, which leads to a common mistake and a surprised look.
For those who missed it, let me remind you that in the process of creating a flash drive, we selected the USB-HDD option. The bootable flash drive is recognized exactly as we called it, so there is no need to look for the usual DVD activation in the BIOS section - First Boot Device.
We place the installation flash drive in a free USB 2.0 connector, wait until the PC picks it up, and then reboot. During the system boot process, press Delete or F2 and enter the BIOS. Depending on the BIOS version, the name of the required Boot sector may differ, but the principle of operation will be the same. Open "Advanced BIOS Features".
Next, click on the “BootSeq & FloppySetup” section, find “Hard Disk Boot Priority”, go in and see the list of drives installed in your PC. Your bootable flash drive should be in the last place of honor - this is what needs to be corrected. To make a flash drive a boot disk, we need to move it to the top of the list - using the keyboard arrows (up and down), select the flash drive. Next, use the “+” keys and press until the installation flash drive becomes the first in the list. We complete the manipulations in the BIOS by pressing the “F10” (save) button.
In order to make the flash drive bootable in BIOS - UEFI, we still find the same Boot sector– Loading, “Fixed Boot Order” opens before us and a sea of “Boot Option” under it - this is setting the system boot sequence. We look at “Boot Option #1” - as a rule, the hard drive or SSD is located there, the system queries it first and the operating system starts loading from there. Click on “Boot Option #1”, find and select the inscription “USB Key:” with the name of your flash drive.
Press “F10” - Windows installation 7 started from a flash drive, then we wait for the first reboot, go into the BIOS, return the hard drive to first place, save. After the reboot, the installation will continue, if you missed this moment - refuse to install again, the PC will start to reboot, go to the BIOS - return the HDD to its place.
How to make the image of a bootable flash drive active in the BIOS - and now you know this. The likelihood that you won’t succeed is practically zero - and these are not just words - this has already been proven by more than tens of thousands of users. A little attention plus a sequence of actions - nothing more is required from you. No. 2 - .
Before installing the OS, I advise you to take a look at - I’m sure you will find something interesting for yourself. Well, after successfully installing the operating system, do not forget to tell your friends how to make a bootable Windows 7 USB flash drive correctly - it will be useful for everyone. Good luck!
Best wishes
Denker.
What is the advantage of this method, or even having a system on a flash drive?
- Speed. Installing from a flash drive is at least 2 times faster than installing from a disk.
- Mobility. A flash drive is much lighter and easier to carry than a CD.
- Versatility. The system can be installed both on a computer and laptop, and on a netbook, where it a priori does not exist.
Minuses:
Some older systems, laptops or computers, do not support booting from a flash drive. But I think many of us already have newer systems, so this shouldn't be a problem.
What tools are needed to burn Windows 7 to a USB flash drive?
UltraISO program. You are probably already familiar with it. Thanks to it, we will, firstly, create an ISO image from our disk. Secondly, we’ll write it to a flash drive so that it will also start. What does that require?
And install it.
Let's launch the program.
After launch, we see a window reminding us that our program is unregistered. This is the Trial version, i.e. we have 30 days to use it. At the same time, the functionality is not limited, at least in our specific case, for what we need.
Choose "Trial period" and start working with this program.
The first thing we need to do is create an ISO image from our system disk. To do this, go to the menu item "Tools - Create CD Image"
Select a drive.
In the “CD Reading Settings” section, leave the default settings.
Ignore reading errors – if the disc is damaged or scratched, then those places that cannot be read will be skipped and recording will continue. But this is not very good, because we have lost files, which will have a bad effect on the correct installation of the system.
Turn onISO filter – it allows you to make a very accurate disk image.
Output format – leave as default "Standard ISO"
Click "Do"
The copying process starts.
After completion, open the created image Windows systems 7
Please note that this is a Bootable UDF, i.e. "Loadable image"
Write a Windows 7 system image to a USB flash drive
To do this, go to the menu item "Boot - burn a hard disk image"
It's time to insert the prepared flash drive.
Which flash drive can be used for Windows entries?
A flash drive with a capacity of 4 GB or more is suitable. The higher the read/write speed of your flash drive, the faster the system installation will be.
Be sure to select the item "Examination". I always recommend it in order to record errors and match the image, so that later there will be no problems with installing the system.
We leave the recording method as default – “ USB-HDD+».
What is the “Write Method” in UltraISO
UltraISO developers have created several image burning methods to increase BIOS compatibility motherboards. Experience shows that the “USB-HDD+” recording method is the most suitable for 95% of flash drives with a system image.
Next point "Hide Boot Partition" leave it as default "No".